ffmpeg 中带音频的屏幕截图
Screen capture WITH audio in ffmpeg
我在 Fedora 20 中使用从 this revision 源代码构建的 ffmpeg。
我可以使用以下命令录制音频非常好:
FFmpeg/ffmpeg -f alsa -ac 2 -i pulse -- output.wav
但是,当我同时尝试屏幕捕获和音频时,如下所示:
FFmpeg/ffmpeg -video_size 800x600 -framerate 25 -ac 2 -f x11grab -i :0.0+0,0 -ac 2 -f alsa -i pulse -ac 2 -acodec copy output.mpeg -ac 2
我收到一个包含 0 个音频通道的视频,我可以检查一下 运行 FFmpeg/ffplay output.mpeg
Input #0, mpeg, from 'output.mpeg':
Duration: 00:00:09.44, start: 0.540000, bitrate: 2743 kb/s
Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p(tv), 800x600 [SAR 1:1 DAR 4:3], 104857 kb/s, 25 fps, 25 tbr, 90k tbn, 25 tbc
Stream #0:1[0x1c0]: Audio: mp2, 0 channels, s16p
7.26 M-V: 0.000 fd= 0 aq= 0KB vq= 33KB sq= 0B f=0/0
并且没有播放任何声音。 -ac 2
的位置不会改变行为,也不会只重复一次。尽管 ffmpeg 声称用 2 个通道录制音频,但这是输入:
ffmpeg version N-71312-ga66dcfe Copyright (c) 2000-2015 the FFmpeg developers
built with gcc 4.8.3 (GCC) 20140911 (Red Hat 4.8.3-7)
configuration:
libavutil 54. 22.100 / 54. 22.100
libavcodec 56. 34.100 / 56. 34.100
libavformat 56. 29.100 / 56. 29.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 13.101 / 5. 13.101
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 1.100 / 1. 1.100
Trailing options were found on the commandline.
Input #0, x11grab, from ':0.0+0,0':
Duration: N/A, start: 1428348285.201679, bitrate: N/A
Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 800x600, 25 fps, 25 tbr, 1000k tbn, 25 tbc
Guessed Channel Layout for Input Stream #1.0 : stereo
Input #1, alsa, from 'pulse':
Duration: N/A, start: 1428348285.225901, bitrate: 1536 kb/s
Stream #1:0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s
File 'output.mpeg' already exists. Overwrite ? [y/N] y
[mpeg @ 0x2d079a0] VBV buffer size not set, using default size of 130KB
If you want the mpeg file to be compliant to some specification
Like DVD, VCD or others, make sure you set the correct buffer size
Output #0, mpeg, to 'output.mpeg':
Metadata:
encoder : Lavf56.29.100
Stream #0:0: Video: mpeg1video, yuv420p, 800x600, q=2-31, 200 kb/s, 25 fps, 90k tbn, 25 tbc
Metadata:
encoder : Lavc56.34.100 mpeg1video
Stream #0:1: Audio: pcm_s16le, 48000 Hz, stereo, 1536 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg1video (native))
Stream #1:0 -> #0:1 (copy)
我一无所知。如果有人可以通过以下任一方式告诉我如何让它工作:
- 修复我在命令行标志中的错误
- 如果是回归,从哪个版本构建。
- 任何其他方式
我会买him/her一个pint。
解决方案似乎是同时使用不同的视频和音频编码器。此行有效:
FFmpeg/ffmpeg -video_size 1024x768 -framerate 25 -f x11grab -i :0.0+0,0 -f alsa -ac 2 -i pulse -acodec aac -strict experimental output.flv
如果没有 -acodec aac -strict experimental
,我无法让它工作,这与 ffmpeg wiki 上的 HOWTO 相反。
我收到的错误消息是:
Output #0, flv, to 'output.flv':
Stream #0:0: Video: flv1 (flv), yuv420p, 1024x768, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc56.34.100 flv
Stream #0:1: Audio: adpcm_swf, 0 channels
Metadata:
encoder : Lavc56.34.100 adpcm_swf
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> flv1 (flv))
Stream #1:0 -> #0:1 (pcm_s16le (native) -> adpcm_swf (native))
Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height
我也无法使用:
FFmpeg/ffmpeg -video_size 1024x768 -framerate 25 -f x11grab -i :0.0+0,0 -f alsa -ac 2 -i pulse -acodec copy output.mpeg
其中包含 -ac 2
可能在正确的位置。我反复收到的错误是:
[mp2 @ 0x7faffc007da0] Header missing
这很可能是 bug/regression。
总而言之,我(可能)在 ffmpeg 中发现了 1 个错误,在 ffmpeg 的 wiki 中发现了 1 个错误。看来我得给自己买承诺的啤酒了 ;)
版本 4.2.2
获取音频
ffmpeg -list_devices true -f dshow -i dummy
然后
ffmpeg -rtbufsize 1500M -f dshow -i audio="Microphone (Realtek High Definition Audio)" -f -y -rtbufsize 100M -f gdigrab -t 00:00:30 -framerate 30 -probesize 10M -draw_mouse 1 -i desktop -c:v libx264 -r 30 -preset ultrafast -tune zerolatency -crf 25 -pix_fmt yuv420p "d:\ffmpeg_testing.mp4"
这个有效:
ffmpeg -f x11grab -video_size 1280x1024 -framerate 24 -i $DISPLAY -f alsa -i default -af \
acompressor=threshold=0.089:ratio=9:attack=200:release=1000 -vf scale=1280x720 -c:v h264_nvenc -g 24 \
-b:v 2M -preset fast -c:a aac -pix_fmt yuv420p -f otut.flv
摘自:使用 FFMPEG 流式传输到 Twitch Y.T。
我在 Fedora 20 中使用从 this revision 源代码构建的 ffmpeg。
我可以使用以下命令录制音频非常好:
FFmpeg/ffmpeg -f alsa -ac 2 -i pulse -- output.wav
但是,当我同时尝试屏幕捕获和音频时,如下所示:
FFmpeg/ffmpeg -video_size 800x600 -framerate 25 -ac 2 -f x11grab -i :0.0+0,0 -ac 2 -f alsa -i pulse -ac 2 -acodec copy output.mpeg -ac 2
我收到一个包含 0 个音频通道的视频,我可以检查一下 运行 FFmpeg/ffplay output.mpeg
Input #0, mpeg, from 'output.mpeg':
Duration: 00:00:09.44, start: 0.540000, bitrate: 2743 kb/s
Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p(tv), 800x600 [SAR 1:1 DAR 4:3], 104857 kb/s, 25 fps, 25 tbr, 90k tbn, 25 tbc
Stream #0:1[0x1c0]: Audio: mp2, 0 channels, s16p
7.26 M-V: 0.000 fd= 0 aq= 0KB vq= 33KB sq= 0B f=0/0
并且没有播放任何声音。 -ac 2
的位置不会改变行为,也不会只重复一次。尽管 ffmpeg 声称用 2 个通道录制音频,但这是输入:
ffmpeg version N-71312-ga66dcfe Copyright (c) 2000-2015 the FFmpeg developers
built with gcc 4.8.3 (GCC) 20140911 (Red Hat 4.8.3-7)
configuration:
libavutil 54. 22.100 / 54. 22.100
libavcodec 56. 34.100 / 56. 34.100
libavformat 56. 29.100 / 56. 29.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 13.101 / 5. 13.101
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 1.100 / 1. 1.100
Trailing options were found on the commandline.
Input #0, x11grab, from ':0.0+0,0':
Duration: N/A, start: 1428348285.201679, bitrate: N/A
Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 800x600, 25 fps, 25 tbr, 1000k tbn, 25 tbc
Guessed Channel Layout for Input Stream #1.0 : stereo
Input #1, alsa, from 'pulse':
Duration: N/A, start: 1428348285.225901, bitrate: 1536 kb/s
Stream #1:0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s
File 'output.mpeg' already exists. Overwrite ? [y/N] y
[mpeg @ 0x2d079a0] VBV buffer size not set, using default size of 130KB
If you want the mpeg file to be compliant to some specification
Like DVD, VCD or others, make sure you set the correct buffer size
Output #0, mpeg, to 'output.mpeg':
Metadata:
encoder : Lavf56.29.100
Stream #0:0: Video: mpeg1video, yuv420p, 800x600, q=2-31, 200 kb/s, 25 fps, 90k tbn, 25 tbc
Metadata:
encoder : Lavc56.34.100 mpeg1video
Stream #0:1: Audio: pcm_s16le, 48000 Hz, stereo, 1536 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg1video (native))
Stream #1:0 -> #0:1 (copy)
我一无所知。如果有人可以通过以下任一方式告诉我如何让它工作:
- 修复我在命令行标志中的错误
- 如果是回归,从哪个版本构建。
- 任何其他方式
我会买him/her一个pint。
解决方案似乎是同时使用不同的视频和音频编码器。此行有效:
FFmpeg/ffmpeg -video_size 1024x768 -framerate 25 -f x11grab -i :0.0+0,0 -f alsa -ac 2 -i pulse -acodec aac -strict experimental output.flv
如果没有 -acodec aac -strict experimental
,我无法让它工作,这与 ffmpeg wiki 上的 HOWTO 相反。
我收到的错误消息是:
Output #0, flv, to 'output.flv':
Stream #0:0: Video: flv1 (flv), yuv420p, 1024x768, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc56.34.100 flv
Stream #0:1: Audio: adpcm_swf, 0 channels
Metadata:
encoder : Lavc56.34.100 adpcm_swf
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> flv1 (flv))
Stream #1:0 -> #0:1 (pcm_s16le (native) -> adpcm_swf (native))
Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height
我也无法使用:
FFmpeg/ffmpeg -video_size 1024x768 -framerate 25 -f x11grab -i :0.0+0,0 -f alsa -ac 2 -i pulse -acodec copy output.mpeg
其中包含 -ac 2
可能在正确的位置。我反复收到的错误是:
[mp2 @ 0x7faffc007da0] Header missing
这很可能是 bug/regression。
总而言之,我(可能)在 ffmpeg 中发现了 1 个错误,在 ffmpeg 的 wiki 中发现了 1 个错误。看来我得给自己买承诺的啤酒了 ;)
版本 4.2.2
获取音频
ffmpeg -list_devices true -f dshow -i dummy
然后
ffmpeg -rtbufsize 1500M -f dshow -i audio="Microphone (Realtek High Definition Audio)" -f -y -rtbufsize 100M -f gdigrab -t 00:00:30 -framerate 30 -probesize 10M -draw_mouse 1 -i desktop -c:v libx264 -r 30 -preset ultrafast -tune zerolatency -crf 25 -pix_fmt yuv420p "d:\ffmpeg_testing.mp4"
这个有效:
ffmpeg -f x11grab -video_size 1280x1024 -framerate 24 -i $DISPLAY -f alsa -i default -af \
acompressor=threshold=0.089:ratio=9:attack=200:release=1000 -vf scale=1280x720 -c:v h264_nvenc -g 24 \
-b:v 2M -preset fast -c:a aac -pix_fmt yuv420p -f otut.flv
摘自:使用 FFMPEG 流式传输到 Twitch Y.T。