尝试验证代码时出现一些错误（[-Waggressive-loop-optimizations]）（仅覆盖相关通道）

Question

我正在尝试用这段代码制作平衡机器人 https://github.com/mahowik/BalancingWii 我看到了很多关于这个项目和相同代码的教程视频，但是在 Arduino IDE 中验证代码时没有人得到这个错误所以我认为问题不在代码中，而是在我身上。

我尝试了旧版本的 Arduino IDE (1.6.12) 但它仍然给出同样的错误。

    sketch\RX.cpp: In function 'computeRC()':
sketch\RX.cpp:435:26: warning: iteration 8 invokes undefined behavior [-Waggressive-loop-optimizations]
         if (rcSerial[chan] >900) {rcData[chan] = rcSerial[chan];} // only relevant channels are overridden
             ~~~~~~~~~~~~~^

sketch\RX.cpp:412:25: note: within this loop
     for (chan = 0; chan < RC_CHANS; chan++) {
C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\main.cpp: In function 'main':
sketch\RX.cpp:435:26: warning: iteration 8 invokes undefined behavior [-Waggressive-loop-optimizations]
         if (rcSerial[chan] >900) {rcData[chan] = rcSerial[chan];} // only relevant channels are overridden
                          ^

sketch\RX.cpp:412:25: note: within this loop
     for (chan = 0; chan < RC_CHANS; chan++) {
                         ^

Sketch uses 14300 bytes (46%) of program storage space. Maximum is 30720 bytes.
Global variables use 1022 bytes (49%) of dynamic memory, leaving 1026 bytes for local variables. Maximum is 2048 bytes.

代码有很多文件，所以我将跳过错误部分

/**************************************************************************************/
/***************          compute and Filter the RX data           ********************/
/**************************************************************************************/
void computeRC() {
  static uint16_t rcData4Values[RC_CHANS][4], rcDataMean[RC_CHANS];
  static uint8_t rc4ValuesIndex = 0;
  uint8_t chan,a;
  #if !defined(OPENLRSv2MULTI) // dont know if this is right here
    #if defined(SBUS)
      readSBus();
    #endif
    rc4ValuesIndex++;
    if (rc4ValuesIndex == 4) rc4ValuesIndex = 0;
    for (chan = 0; chan < RC_CHANS; chan++) {
      #if defined(FAILSAFE)
        uint16_t rcval = readRawRC(chan);
        if(rcval>FAILSAFE_DETECT_TRESHOLD || chan > 3 || !f.ARMED) {        // update controls channel only if pulse is above FAILSAFE_DETECT_TRESHOLD
          rcData4Values[chan][rc4ValuesIndex] = rcval;                      // In disarmed state allow always update for easer configuration.
        }
      #else
        rcData4Values[chan][rc4ValuesIndex] = readRawRC(chan);
      #endif
      #if defined(SPEKTRUM) || defined(SBUS) // no averaging for Spektrum & SBUS signal
        rcData[chan] = rcData4Values[chan][rc4ValuesIndex];
      #else
        rcDataMean[chan] = 0;
        for (a=0;a<4;a++) rcDataMean[chan] += rcData4Values[chan][a];
        rcDataMean[chan]= (rcDataMean[chan]+2)>>2;
        if ( rcDataMean[chan] < (uint16_t)rcData[chan] -3)  rcData[chan] = rcDataMean[chan]+2;
        if ( rcDataMean[chan] > (uint16_t)rcData[chan] +3)  rcData[chan] = rcDataMean[chan]-2;
      #endif
      //if (chan<8 && rcSerialCount > 0) { // rcData comes from MSP and overrides RX Data until rcSerialCount reaches 0
        //rcSerialCount --;
        #if defined(FAILSAFE)
          failsafeCnt = 0;
        #endif
        if (rcSerial[chan] >900) {rcData[chan] = rcSerial[chan];} // only relevant channels are overridden
      //}
    }
  #endif
}

Answer 1

发生此错误是因为索引 chan（一直到 RC_CHANS）大于数组 rcSerial（即 8）的大小。

错误行周围的部分检查if (chan<8，但被注释掉了。我想你可以把它加回去看看代码是否有效。

Answer 2

试试这个：视频 => https://youtu.be/pnIWtPeqc0o 代码=> https://create.arduino.cc/projecthub/rinotronik/uno-minimal-system-read-rc-sbus-to-servo-signals-with-oled-d308aa

尝试验证代码时出现一些错误（[-Waggressive-loop-optimizations]）（仅覆盖相关通道）

Getting some errors when trying verify the code ([-Waggressive-loop-optimizations]) (only relevant channels are overridden)

c++

arduino

arduino-ide

arduino-nano