使用 PSCustomObject 在单独的列中列出多个文件夹然后选择一些？
Listing multiple folders in seperate columns using PSCustomObject then selecting some?
早上好，
我的桌面上有 3 个文件夹，每个文件夹包含随机数量的文件夹。
文件夹 1
- 子文件夹：“这里也是”、“更多内容”、“Ranom 内容”、“这里有东西”
文件夹 2
- 子文件夹：“和这里”、“无聊”、“这里的东西”、“这里也是”、“这里的东西”
文件夹 3
- 子文件夹：“你好”、“你好”、“更多内容”、“随机”、“随机”、“Space”
我要完成的任务： 根据主文件夹列出每个单独列中的子文件夹，例如：
SelectionOne SelectionTwo SelectionThree
------------ ------------ --------------
0: here too 4: and here 9: Hello
1: more stuff 5: bored 10: Howdy
2: Ranom stuff 6: Here stuff 11: More Stuff here
3: Something Here 7: here too 12: Random
8: stuff here 13: Random here
14: Space
Enter Folder Numbers: 3, 14
然后就可以select对应的文件夹按编号select编辑如：
# from the 3, and 14 selection it would be the following selected:
'Something Here'
'Space'
到目前为止，我可以在单独的列中列出文件夹，只是不分配前一列的增量值。我面临的另一个问题是试图 select 该数组的正确索引号并以某种方式将其与正确的文件夹相关联？即，当我 selected 3,14 时，第一列和第三列中的相应文件夹被 selected 但是，它也只显示为：
SelectionOne SelectionTwo SelectionThree
------------ ------------ --------------
0: here too 0: and here 0: Hello
1: more stuff 1: bored 1: Howdy
2: Ranom stuff 2: Here stuff 2: More Stuff here
3: Something Here 3: here too 3: Random
4: stuff here 4: Random here
5: Space
这是我的：
$Folder1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1'
$Folders1 = for ($i=0; $i -lt $Folder1.Count; $i++) {
[PSCustomObject]@{
FolderNames1 = "${i}: $($Folder1[$i].Name)"
}
}
$Folder2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2'
$Folders2 = for ($i=0; $i -lt $Folder2.Count; $i++) {
[PSCustomObject]@{
FolderNames2 = "${i}: $($Folder2[$i].Name)"
}
}
$Folder3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3'
$Folders3 = for ($i=0; $i -lt $Folder3.Count; $i++) {
[PSCustomObject]@{
FolderNames3 = "${i}: $($Folder3[$i].Name)"
}
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
& {
for ($i=0; $i -lt $Count; $i++) {
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
} | Format-Table -AutoSize -Wrap
$index = Read-Host -Prompt "Enter Folder Numbers" # Selected 3, 14
$index = $i.Trim() -split ','
foreach ($i in $index) {
# here would be correct folder for the corresponding
# array number.
# example:
<#
# from the selected 3, and 14.
# the following folders are selected
'Something Here'
'Space'
#>
}
谁能给我指出正确的方向？
我觉得这是以前没有做过的事情，但感觉它对未来的 Posh 用户来说会很方便。
非常好的脚本练习亚伯拉罕 :) 我没有做太多改变，可能有更好的方法，但我认为这应该有效。
那么，发生了什么变化？
- 首先存储
for ($i=0; $i -lt $Count; $i++) { ... } 的结果，然后再将其显示到控制台：
$result = for ($i=0; $i -lt $Count; $i++) {...}
$result | Format-Table -Wrap
- 将
[int[]]转换为Read-Host，你需要在这里实现一个try {} catch {}：
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
- 文件/文件夹的编号，如何记住最后一个索引？，那个可以在第一个
for循环之后完成（$rememberI = $i ) 然后在下面的循环中你只需递增 $rememberI:
[PSCustomObject]@{
FolderNames2 = "${rememberI}: $($Folder2[$i].Name)"
}
$rememberI++
- 最后，如何找出用户选择的文件/文件夹，这有点老套，我认为这里可能有更好的方法，但我不太好解释这是如何工作的，我只是知道它应该工作 :P
[regex]::Match(
$result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value,
'(?<=: ).*'
).Value
代码
$Folder1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1'
$Folders1 = for ($i=0; $i -lt $Folder1.Count; $i++)
{
[PSCustomObject]@{
FolderNames1 = "${i}: $($Folder1[$i].Name)"
}
}
$rememberI = $i
$Folder2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2'
$Folders2 = for ($i=0; $i -lt $Folder2.Count; $i++)
{
[PSCustomObject]@{
FolderNames2 = "${rememberI}: $($Folder2[$i].Name)"
}
$rememberI++
}
$Folder3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3'
$Folders3 = for ($i=0; $i -lt $Folder3.Count; $i++)
{
[PSCustomObject]@{
FolderNames3 = "${rememberI}: $($Folder3[$i].Name)"
}
$rememberI++
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
$result = for ($i=0; $i -lt $Count; $i++)
{
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
$result | Format-Table -Wrap
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
foreach ($i in $index)
{
[regex]::Match(
$result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value,
'(?<=: ).*'
).Value
}
编辑
显示 FullName 而不是 Name ?
$folderIndex = @{}
$Folders1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1' |
ForEach-Object -Begin { $i = 0 } -Process {
$newName = "${i}: $($_.Name)"
[PSCustomObject]@{
FolderNames1 = $newName
}
$folderIndex[$newName] = $_.FullName
$i++
}
$rememberI = $i
$Folders2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2' |
ForEach-Object {
$newName = "${rememberI}: $($_.Name)"
[PSCustomObject]@{
FolderNames2 = $newName
}
$folderIndex[$newName] = $_.FullName
$rememberI++
}
$Folders3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3' |
ForEach-Object {
$newName = "${rememberI}: $($_.Name)"
[PSCustomObject]@{
FolderNames3 = $newName
}
$folderIndex[$newName] = $_.FullName
$rememberI++
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
$result = for ($i=0; $i -lt $Count; $i++)
{
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
$result | Format-Table -Wrap
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
foreach ($i in $index)
{
$thisVal = $result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value
$folderIndex[$thisVal]
}
早上好，
我的桌面上有 3 个文件夹，每个文件夹包含随机数量的文件夹。
文件夹 1
- 子文件夹：“这里也是”、“更多内容”、“Ranom 内容”、“这里有东西”
文件夹 2
- 子文件夹：“和这里”、“无聊”、“这里的东西”、“这里也是”、“这里的东西”
文件夹 3
- 子文件夹：“你好”、“你好”、“更多内容”、“随机”、“随机”、“Space”
我要完成的任务： 根据主文件夹列出每个单独列中的子文件夹，例如：
SelectionOne SelectionTwo SelectionThree
------------ ------------ --------------
0: here too 4: and here 9: Hello
1: more stuff 5: bored 10: Howdy
2: Ranom stuff 6: Here stuff 11: More Stuff here
3: Something Here 7: here too 12: Random
8: stuff here 13: Random here
14: Space
Enter Folder Numbers: 3, 14
然后就可以select对应的文件夹按编号select编辑如：
# from the 3, and 14 selection it would be the following selected:
'Something Here'
'Space'
到目前为止，我可以在单独的列中列出文件夹，只是不分配前一列的增量值。我面临的另一个问题是试图 select 该数组的正确索引号并以某种方式将其与正确的文件夹相关联？即，当我 selected 3,14 时，第一列和第三列中的相应文件夹被 selected 但是，它也只显示为：
SelectionOne SelectionTwo SelectionThree
------------ ------------ --------------
0: here too 0: and here 0: Hello
1: more stuff 1: bored 1: Howdy
2: Ranom stuff 2: Here stuff 2: More Stuff here
3: Something Here 3: here too 3: Random
4: stuff here 4: Random here
5: Space
这是我的：
$Folder1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1'
$Folders1 = for ($i=0; $i -lt $Folder1.Count; $i++) {
[PSCustomObject]@{
FolderNames1 = "${i}: $($Folder1[$i].Name)"
}
}
$Folder2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2'
$Folders2 = for ($i=0; $i -lt $Folder2.Count; $i++) {
[PSCustomObject]@{
FolderNames2 = "${i}: $($Folder2[$i].Name)"
}
}
$Folder3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3'
$Folders3 = for ($i=0; $i -lt $Folder3.Count; $i++) {
[PSCustomObject]@{
FolderNames3 = "${i}: $($Folder3[$i].Name)"
}
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
& {
for ($i=0; $i -lt $Count; $i++) {
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
} | Format-Table -AutoSize -Wrap
$index = Read-Host -Prompt "Enter Folder Numbers" # Selected 3, 14
$index = $i.Trim() -split ','
foreach ($i in $index) {
# here would be correct folder for the corresponding
# array number.
# example:
<#
# from the selected 3, and 14.
# the following folders are selected
'Something Here'
'Space'
#>
}
谁能给我指出正确的方向？
我觉得这是以前没有做过的事情，但感觉它对未来的 Posh 用户来说会很方便。
非常好的脚本练习亚伯拉罕 :) 我没有做太多改变，可能有更好的方法，但我认为这应该有效。
那么，发生了什么变化？
- 首先存储
for ($i=0; $i -lt $Count; $i++) { ... }的结果，然后再将其显示到控制台：
$result = for ($i=0; $i -lt $Count; $i++) {...}
$result | Format-Table -Wrap
- 将
[int[]]转换为Read-Host，你需要在这里实现一个try {} catch {}：
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
- 文件/文件夹的编号，如何记住最后一个索引？，那个可以在第一个
for循环之后完成（$rememberI = $i) 然后在下面的循环中你只需递增$rememberI:
[PSCustomObject]@{
FolderNames2 = "${rememberI}: $($Folder2[$i].Name)"
}
$rememberI++
- 最后，如何找出用户选择的文件/文件夹，这有点老套，我认为这里可能有更好的方法，但我不太好解释这是如何工作的，我只是知道它应该工作 :P
[regex]::Match(
$result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value,
'(?<=: ).*'
).Value
代码
$Folder1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1'
$Folders1 = for ($i=0; $i -lt $Folder1.Count; $i++)
{
[PSCustomObject]@{
FolderNames1 = "${i}: $($Folder1[$i].Name)"
}
}
$rememberI = $i
$Folder2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2'
$Folders2 = for ($i=0; $i -lt $Folder2.Count; $i++)
{
[PSCustomObject]@{
FolderNames2 = "${rememberI}: $($Folder2[$i].Name)"
}
$rememberI++
}
$Folder3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3'
$Folders3 = for ($i=0; $i -lt $Folder3.Count; $i++)
{
[PSCustomObject]@{
FolderNames3 = "${rememberI}: $($Folder3[$i].Name)"
}
$rememberI++
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
$result = for ($i=0; $i -lt $Count; $i++)
{
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
$result | Format-Table -Wrap
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
foreach ($i in $index)
{
[regex]::Match(
$result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value,
'(?<=: ).*'
).Value
}
编辑
显示 FullName 而不是 Name ?
$folderIndex = @{}
$Folders1 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 1' |
ForEach-Object -Begin { $i = 0 } -Process {
$newName = "${i}: $($_.Name)"
[PSCustomObject]@{
FolderNames1 = $newName
}
$folderIndex[$newName] = $_.FullName
$i++
}
$rememberI = $i
$Folders2 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 2' |
ForEach-Object {
$newName = "${rememberI}: $($_.Name)"
[PSCustomObject]@{
FolderNames2 = $newName
}
$folderIndex[$newName] = $_.FullName
$rememberI++
}
$Folders3 = Get-ChildItem -Path 'C:\users\Abraham\Desktop\Number 3' |
ForEach-Object {
$newName = "${rememberI}: $($_.Name)"
[PSCustomObject]@{
FolderNames3 = $newName
}
$folderIndex[$newName] = $_.FullName
$rememberI++
}
$Count = ($Folders1.Count,$Folders2.Count,$Folders3.Count | Measure-Object -Maximum).Maximum
$result = for ($i=0; $i -lt $Count; $i++)
{
[PSCustomObject]@{
SelectionOne = ($Folders1[$i].FolderNames1 | Format-List | Out-String).Trim()
SelectionTwo = ($Folders2[$i].FolderNames2 | Format-List | Out-String).Trim()
SelectionThree = ($Folders3[$i].FolderNames3 | Format-List | Out-String).Trim()
}
}
$result | Format-Table -Wrap
[int[]]$index = (Read-Host -Prompt "Enter Folder Numbers") -split ',' # Implement Try Catch here
foreach ($i in $index)
{
$thisVal = $result.ForEach({$_.PSObject.Properties}).Where({$_.Value -match "^${i}:"}).Value
$folderIndex[$thisVal]
}