Qt 5 使用 QFile 和 QDataStream 写入 Linux SysFs 条目

Question

我可以 echo 100 > /sys/class/soft_pwm/pwm-35/duty_cycle 作为 root 从命令行很好，但是当运行作为 root 时我无法让我的 Qt 5 代码做同样的事情。下面是代码——我做错了什么？谢谢

/**
 * Set the PWM on the Red / Green LEDs
 * @param percent
 */
void LedController::setLedPwm(int percent) {

    // Cap the percent
    if ( percent > 90 ) {
        percent = 90;
    }
    if ( percent < 25 ) {
        percent = 25;
    }

    // Scale to usable percent
    percent = abs(percent - 100);

    QFile file1("/sys/class/soft_pwm/pwm-35/duty_cycle");
    if (!file1.open(QIODevice::WriteOnly | QIODevice::Text)) {
        qDebug() << "LedController: Cannot set LED PWM for Red/Green LEDs [ 35 ]...";
        return;
    }
    QDataStream in1(&file1);
    QString toWrite1 = QString("%1\n").arg(percent);
    qDebug() << "LedController: PWM Led [ 35 ]" << toWrite1;
    in1 << toWrite1;
    file1.close();

    QFile file2("/sys/class/soft_pwm/pwm-39/duty_cycle");
    if (!file2.open(QIODevice::WriteOnly | QIODevice::Text)) {
        qDebug() << "LedController: Cannot set LED PWM for Red/Green LEDs [ 39 ]...";
        return;
    }
    QDataStream in2(&file2);
    QString toWrite2 = QString("%1\n").arg(percent);
    qDebug() << "LedController: PWM Led [ 35 ]" << toWrite2;
    in2 << toWrite1;
    file2.close();

}

Answer 1

QDataStream 用于二进制数据存储。要写入文本值，请使用 QTextStream。

Qt 5 使用 QFile 和 QDataStream 写入 Linux SysFs 条目

Qt 5 Write Linux SysFs Entry with QFile and QDataStream

linux

qt

qfile

sysfs

qt5