生成报告仪表板错误数

Question

我参考了http://jmeter.apache.org/usermanual/generating-dashboard.html#configure_general，结果报错数不对，实际情况总是比1多（cvs，只有5个false，但是显示6个错误数），我没有知道bug还是我没找到配置的地方是不是Jmeter3.0？

Answer 1

我无法生成 HTML 报告，如您在屏幕截图中所示，尽管我已按照说明进行了配置。而且在 csv 文件中我无法看到标签。

Could you please guide me,where am i missing.

**My jmeterproperties file settings:**


# legitimate values: xml, csv, db.  Only xml and csv are currently supported.
jmeter.save.saveservice.output_format=csv


# true when field should be saved; false otherwise

# assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
#
# legitimate values: none, first, all
#jmeter.save.saveservice.assertion_results=none
#
jmeter.save.saveservice.data_type=true
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
jmeter.save.saveservice.response_data=false
# Save ResponseData for failed samples
jmeter.save.saveservice.response_data.on_error=false
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=true
jmeter.save.saveservice.assertions=true
jmeter.save.saveservice.latency=true
jmeter.save.saveservice.connect_time=false
#jmeter.save.saveservice.samplerData=false
jmeter.save.saveservice.responseHeaders=false
jmeter.save.saveservice.requestHeaders=false
#jmeter.save.saveservice.encoding=false
jmeter.save.saveservice.bytes=true
jmeter.save.saveservice.url=false
#jmeter.save.saveservice.filename=false
#jmeter.save.saveservice.hostname=false
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=false
#jmeter.save.saveservice.idle_time=true

# Timestamp format - this only affects CSV output files
# legitimate values: none, ms, or a format suitable for SimpleDateFormat
jmeter.save.saveservice.timestamp_format=ms
jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss.SSS

My UserProperties file settings:
 Configure this property to change the report title
jmeter.reportgenerator.report_title=TimeTrax Performance Test JMeter Report Dashboard

# Change this parameter if you want to change the granularity of over time graphs.
jmeter.reportgenerator.overall_granularity=60000

# Change this parameter if you want to change the granularity of Response time distribution
# Set to 500 ms by default
jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=500

# Change this parameter if you want to keep only some samples.
# Regular Expression which Indicates which samples to keep for graphs and statistics generation.
# Empty value means no filtering
#jmeter.reportgenerator.sample_filter=

# Change this parameter if you want to override the APDEX satisfaction threshold.
#jmeter.reportgenerator.apdex_satisfied_threshold=500
jmeter.reportgenerator.apdex_satisfied_threshold=1500

# Change this parameter if you want to override the APDEX tolerance threshold.
#jmeter.reportgenerator.apdex_tolerated_threshold=1500
jmeter.reportgenerator.apdex_tolerated_threshold=3000

# Indicates which graph series are filtered (regular expression)
# In the below example we filter on Search and Order samples
# Note that the end of the pattern should always include (-success|-failure)? 
# TransactionsPerSecondGraphConsumer suffixes transactions with "-success" or "-failure" depending 
# on the result
#jmeter.reportgenerator.exporter.html.series_filter=(Search|Order)(-success|-failure)?
jmeter.reportgenerator.exporter.html.series_filter=(Search|Order)(-success|-failure)?

# Indicates whether only controller samples are displayed on graphs that support it.
#jmeter.reportgenerator.exporter.html.show_controllers_only=false

# Indicates whether series filter apply only on sample series or to all series
# setting this to false can lead to empty graphs if series_filter does not
# contain required series
jmeter.reportgenerator.exporter.html.filters_only_sample_series=true

Thanks,
Raj

Answer 2

这是 JMeter 中报告的一个小问题：

https://bz.apache.org/bugzilla/show_bug.cgi?id=59621

报告仪表板中的错误计数为一。

现在已在 jmeter nightly build 中修复：

http://jmeter.apache.org/nightly.html

Answer 3

我在这个 StachExchange 问题中给出了很好的解释报告仪表板生成，请按照相同的步骤为您的测试计划生成 HTML 报告。

生成报告仪表板错误数

Generating Report Dashboard Errors number

jmeter

apdex