静态 IP 和自动 wifi 连接的网络配置

Question

我想将我的 Raspberry Pi 设置为静态 IP 设备，它通过以太网通信（通过像 192.168.20.X 这样的 IP），同时它应该连接到通过 WLAN (192.168.1.1) 上网。但是，当我允许 'auto eth0' 时，它不会配置 wlan0。我希望他们两个都能工作。我当前的配置如下：

source-directory /etc/network/interfaces.d
auto lo

iface lo inet loopback

auto eth0  
iface eth0 inet static
 address 192.168.20.40
 netmask 255.255.255.0
 network 192.168.20.1
 gateway 192.168.20.1


allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

我错过了什么？任何帮助，将不胜感激。提前致谢。

已解决：

source-directory /etc/network/interfaces.d
auto lo

iface lo inet loopback

auto eth0  
iface eth0 inet static
 address 192.168.20.45
 netmask 255.255.255.0
 network 192.168.20.1
 gateway 192.168.1.1    # Changing this worked
 dns-nameservers 8.8.8.8 8.8.4.4

allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

Answer 1

使用静态 IP

配置 "wlan0"

它将正常工作

Answer 2

已解决：

source-directory /etc/network/interfaces.d
auto lo

iface lo inet loopback

auto eth0  
iface eth0 inet static
 address 192.168.20.45
 netmask 255.255.255.0
 network 192.168.20.1
 gateway 192.168.1.1    # Changing this worked
 dns-nameservers 8.8.8.8 8.8.4.4

allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

静态 IP 和自动 wifi 连接的网络配置

Network configuration for static IP and automatic wifi connection

linux

networking

interface

raspberry-pi

static-ip-address