使用SNPE转换tensorflow dense layer时报错

Question

在转换自定义张量流图时，我看到与将密集层从 pb 格式转换为 DLC 格式有关的错误：

2017-11-02 13:43:35,260 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (dense/Tensordot/transpose) not consumed by converter: Transpose.
2017-11-02 13:43:35,261 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (dense/Tensordot/transpose_1) not consumed by converter: Transpose.
2017-11-02 13:43:35,261 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (dense/Tensordot/MatMul) not consumed by converter: MatMul.
2017-11-02 13:43:35,261 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (dense/BiasAdd) not consumed by converter: BiasAdd.
2017-11-02 13:43:35,261 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (logit/Tensordot/transpose) not consumed by converter: Transpose.
2017-11-02 13:43:35,262 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (logit/Tensordot/transpose_1) not consumed by converter: Transpose.
2017-11-02 13:43:35,262 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (logit/Tensordot/MatMul) not consumed by converter: MatMul.
2017-11-02 13:43:35,262 - 305 - WARNING - WARNING_TF_SCOPE_OP_NOT_CONSUMED: Operation (logit/BiasAdd) not consumed by converter: BiasAdd.
2017-11-02 13:43:35,263 - 123 - ERROR - Conversion failed: Some operations in the Tensorflow graph were not resolved to a layer!

我对此有点困惑，因为该层只是二维卷积之后的密集层，我确信 SNPE 支持它。错误原因是什么？

图的拓扑结构如下：

0 input_layer Placeholder
1 conv2d/kernel Const
2 conv2d/kernel/read Identity
└─── Input0 ─ conv2d/kernel
3 conv2d/bias Const
4 conv2d/bias/read Identity
└─── Input0 ─ conv2d/bias
5 conv2d/convolution Conv2D
└─── Input0 ─ input_layer
└─── Input1 ─ conv2d/kernel/read
6 conv2d/BiasAdd BiasAdd
└─── Input0 ─ conv2d/convolution
└─── Input1 ─ conv2d/bias/read
7 conv2d/Relu Relu
└─── Input0 ─ conv2d/BiasAdd
8 max_pooling2d/MaxPool MaxPool
└─── Input0 ─ conv2d/Relu
9 conv2d_1/kernel Const
10 conv2d_1/kernel/read Identity
└─── Input0 ─ conv2d_1/kernel
11 conv2d_1/bias Const
12 conv2d_1/bias/read Identity
└─── Input0 ─ conv2d_1/bias
13 conv2d_2/convolution Conv2D
└─── Input0 ─ max_pooling2d/MaxPool
└─── Input1 ─ conv2d_1/kernel/read
14 conv2d_2/BiasAdd BiasAdd
└─── Input0 ─ conv2d_2/convolution
└─── Input1 ─ conv2d_1/bias/read
15 conv2d_2/Relu Relu
└─── Input0 ─ conv2d_2/BiasAdd
16 max_pooling2d_2/MaxPool MaxPool
└─── Input0 ─ conv2d_2/Relu
17 conv2d_2/kernel Const
18 conv2d_2/kernel/read Identity
└─── Input0 ─ conv2d_2/kernel
19 conv2d_2/bias Const
20 conv2d_2/bias/read Identity
└─── Input0 ─ conv2d_2/bias
21 conv2d_3/convolution Conv2D
└─── Input0 ─ max_pooling2d_2/MaxPool
└─── Input1 ─ conv2d_2/kernel/read
22 conv2d_3/BiasAdd BiasAdd
└─── Input0 ─ conv2d_3/convolution
└─── Input1 ─ conv2d_2/bias/read
23 conv2d_3/Relu Relu

注意：我也把这个问题发到高通开发者网络了，但是好像没有出现，可能是审核队列的问题.

Answer 1

我在使用密集层 (tf.layers.dense API) 时遇到了同样的问题。问题的原因是对权重应用了重塑操作（由 tf.layer.dense API 引入）。转换器将其误解为模型执行的一部分，因此尝试转换为它不能转换的层，因为它没有输入层。

您可以在卷积和完全连接之间使用 reshape(tf.reshape API) 来展平张量，它会很好地工作。

使用SNPE转换tensorflow dense layer时报错

Error when using SNPE to convert tensorflow dense layer

android

qualcomm

tensorflow

snpe