无法在 avrdude 版本 6.0.1 中使用 avrisp mkII 进行刷写
Can't flash with avrisp mkII in avrdude Version 6.0.1
我在使用 this 编程板时遇到了问题。它设置正确似乎是一个 AVRISP MKII。
我在使用 avrdude 闪烁时收到以下错误消息：
(trusty)chandran@localhost:~$ avrdude -c avrispmkii -p t85 -vv
avrdude: Version 6.0.1, compiled on Oct 21 2013 at 15:55:32
Copyright (c) 2000-2005 Brian Dean, h ttp://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/chandran/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : avrispmkii
avrdude: usb_open(): cannot read serial number "error sending control
message: Connection timed out"
avrdude: usbdev_open(): Found AVRISP mkII, serno: [unknown]
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No
such file or directory
avrdude: stk500v2_recv_mk2: error in USB receive
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No such file or directory
avrdude: stk500v2_recv_mk2: error in USB receive
avrdude: stk500v2_getsync(): timeout communicating with programmer
AVR Part : ATtiny85
Chip Erase delay : 4500 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 2 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No such file or directory
很难确定问题，因为我的编程板版本没有这么好的文档。
提前致谢！
This bug 导致了问题。我只是恢复到以前版本的 avrdude (5.11.1) 并且它有效。现在有更新版本的avrdude (6.3)，这个错误在最新版本中可能不再是问题。
以下是一些步骤：
- 通过使用
sudo apt-get install <package-name>=<package-version-number> 或 sudo apt-get install <package-name>=<package-version-number> 恢复到 avrdude 的 older version
- 检查是否有效：
avrdude -p <your part name> -c <your programmer name (avrispmkII)>
您可能需要 specify a port。如果出现如下错误，请使用“'watch ls /dev/tty*'”之类的内容查找您的设备：
(trusty)chandran@localhost:~$ avrdude -c avrispmkII -p t85
avrdude: ser_open(): 无法打开设备“/dev/ttyS0”: 没有那个文件或目录
avrdude 完成。谢谢。
下面是你做对后的样子：
(trusty)chandran@localhost:~$ avrdude -c avrispmkII -p t85 -P usb -vv
avrdude: Version 5.11.1, compiled on Oct 30 2011 at 10:37:28
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/chandran/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : avrispmkII
avrdude: usb_open(): cannot read serial number "No error"
avrdude: usbdev_open(): Found AVRISP mkII, serno: [unknown]
avrdude: usbdev_open(): using read endpoint 0x83
AVR Part : ATtiny85
Chip Erase delay : 4500 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 2 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
Hardware Version: 0
Firmware Version Master : 1.255
Vtarget : 3.3 V
SCK period : 8.00 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e930b
avrdude: safemode: lfuse reads as 62
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: lfuse reads as 62
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK
avrdude done. Thank you.
如果这不能解决您的问题，您可能需要查看其他一些解决方案：
https://electronics.stackexchange.com/questions/78302/avrisp-mkii-not-reading-device-signature/189488
https://electronics.stackexchange.com/questions/67757/why-does-my-avrisp-mkii-programmer-not-work
AVRISP MKII doesn't work with AVRDUDE on Linux
祝你好运！
我在使用 this 编程板时遇到了问题。它设置正确似乎是一个 AVRISP MKII。
我在使用 avrdude 闪烁时收到以下错误消息：
(trusty)chandran@localhost:~$ avrdude -c avrispmkii -p t85 -vv
avrdude: Version 6.0.1, compiled on Oct 21 2013 at 15:55:32
Copyright (c) 2000-2005 Brian Dean, h ttp://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/chandran/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : avrispmkii
avrdude: usb_open(): cannot read serial number "error sending control
message: Connection timed out"
avrdude: usbdev_open(): Found AVRISP mkII, serno: [unknown]
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No
such file or directory
avrdude: stk500v2_recv_mk2: error in USB receive
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No such file or directory
avrdude: stk500v2_recv_mk2: error in USB receive
avrdude: stk500v2_getsync(): timeout communicating with programmer
AVR Part : ATtiny85
Chip Erase delay : 4500 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 2 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
avrdude: usbdev_recv_frame(): usb_bulk_read(): error submitting URB: No such file or directory
很难确定问题，因为我的编程板版本没有这么好的文档。
提前致谢！
This bug 导致了问题。我只是恢复到以前版本的 avrdude (5.11.1) 并且它有效。现在有更新版本的avrdude (6.3)，这个错误在最新版本中可能不再是问题。
以下是一些步骤：
- 通过使用
sudo apt-get install <package-name>=<package-version-number>或sudo apt-get install <package-name>=<package-version-number> 恢复到 avrdude 的 older version
- 检查是否有效：
avrdude -p <your part name> -c <your programmer name (avrispmkII)> 您可能需要 specify a port。如果出现如下错误，请使用“'watch ls /dev/tty*'”之类的内容查找您的设备：
(trusty)chandran@localhost:~$ avrdude -c avrispmkII -p t85
avrdude: ser_open(): 无法打开设备“/dev/ttyS0”: 没有那个文件或目录avrdude 完成。谢谢。
下面是你做对后的样子：
(trusty)chandran@localhost:~$ avrdude -c avrispmkII -p t85 -P usb -vv
avrdude: Version 5.11.1, compiled on Oct 30 2011 at 10:37:28
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/chandran/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : usb
Using Programmer : avrispmkII
avrdude: usb_open(): cannot read serial number "No error"
avrdude: usbdev_open(): Found AVRISP mkII, serno: [unknown]
avrdude: usbdev_open(): using read endpoint 0x83
AVR Part : ATtiny85
Chip Erase delay : 4500 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 2 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
Hardware Version: 0
Firmware Version Master : 1.255
Vtarget : 3.3 V
SCK period : 8.00 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e930b
avrdude: safemode: lfuse reads as 62
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: lfuse reads as 62
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK
avrdude done. Thank you.
如果这不能解决您的问题，您可能需要查看其他一些解决方案： https://electronics.stackexchange.com/questions/78302/avrisp-mkii-not-reading-device-signature/189488
https://electronics.stackexchange.com/questions/67757/why-does-my-avrisp-mkii-programmer-not-work
AVRISP MKII doesn't work with AVRDUDE on Linux
祝你好运！