如何逐行打印 telnet 输出？

Question

我已经实现了一个连接到 Cisco 设备并收集 show 运行输出的脚本。

脚本是：

import getpass
import telnetlib
import time


HOST = "10.62.149.9"
user = input("Enter your remote account: ")
password = getpass.getpass("User Password: ")
enable = getpass.getpass("Enable Password: ")

tn = telnetlib.Telnet(HOST)

tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")
if password:
    tn.read_until(b"Password: ")
    tn.write(password.encode('ascii') + b"\n")
tn.write(b"enable\n")
if enable:
    tn.read_until(b"Password: ")
    tn.write(enable.encode('ascii') + b"\n")
tn.write(b"term len 0\n")
tn.write(b"show run\n")
time.sleep(10)
s = tn.read_very_eager()
print (s)
tn.close()

脚本输出为：

\r\ninterface GigabitEthernet1/0/26\r\n!\r\ninterface GigabitEthernet1/0/27\r\n!\r\ninterface GigabitEthernet1/0/28\r\n!\r\ninterface GigabitEthernet1/0/29\r\n!\r\ninterface GigabitEthernet1/0/30\r\n!\r\ninterface GigabitEthernet1/0/31\r\n!\r\ninterface GigabitEthernet1/0/32\r\n!\r\ninterface GigabitEthernet1/0/33\r\n!\r\ninterface GigabitEthernet1/0/34\r\n!\r\ninterface GigabitEthernet1/0/35\r\n!\r\ninterface GigabitEthernet1/0/36\r\n!\r\ninterface GigabitEthernet1/0/37\r\n!\r\ninterface GigabitEthernet1/0/38\r\n!\r\ninterface GigabitEthernet1/0/39\r\n!\r\ninterface GigabitEthernet1/0/40\r\n!\r\ninterface GigabitEthernet1/0/41\r\n!\r\ninterface GigabitEthernet1/0/42\r\n!\r\ninterface GigabitEthernet1/0/43\r\n!\r\ninterface GigabitEthernet1/0/44\r\n!\r\ninterface GigabitEthernet1/0/45\r\n!\r\ninterface GigabitEthernet1/0/46\r\n!\r\ninterface GigabitEthernet1/0/47\r\n!\r\ninterface GigabitEthernet1/0/48\r\n no switchport\r\n ip address 10.62.149.9
255.255.255.128\r\n!\r\ninterface GigabitEthernet1/0/49\r\n!\r\ninterface GigabitEthernet1/0/50\r\n!\r\ninterface GigabitEthernet1/0/51\r\n!\r\ninterface GigabitEthernet1/0/52\r\n!\r\ninterface Vlan1\r\n no ip address\r\n shutdown\r\n!\r\ninterface Vlan10\r\n ip address 10.10.10.1
255.255.255.0\r\n!\r\ninterface Vlan199\r\n ip address 217.21.0.6 255.255.254.0\r\n no ip redirects\r\n ip ospf priority 100\r\n!\r\ninterface Vlan777\r\n ip address 7.7.7.1

问题

有没有办法更改脚本以便逐行显示输出？

Answer 1

您需要使用 python split() 函数检查带有分隔行的一些常见特殊字符的字符串，然后使用变量的长度启动 for 循环，然后打印。

Answer 2

documentation for telnetlib中对Telnet.read_very_eager不是很清楚，但它提到它读写bytes用于其他方法。 type(s) 大概是 bytes.

使用bytes.decode得到一个字符串：print(s.decode('ascii'))（使用适当的编码）

注意：这是针对 Python 3.

如何逐行打印 telnet 输出？

How can i get telnet output printed line by line?

python

telnetlib

cisco-ios