如何在 IVY 中使用通配符：<artifacts pattern="..."/>
How to use wildcards in IVY: <artifacts pattern="..."/>
我想用 ivy 发布我的工件，但我的构建路径是动态的而不是静态的，因为它包含版本标签，即："build_02.14Test3".
这是我的 build.xml:
<target name="go" depends="install-ivy"
description="--> create and publish">
<property environment="env"/>
<fail unless="env.PUBREVISION" message="no publish revision set!"/>
<ivy:resolve/>
<ivy:publish resolver="components" pubrevision="${env.PUBREVISION}">
<artifacts pattern="../Java/build_*/Release/[artifact].[ext]"/>
</ivy:publish>
</target>
整个build.xml文件：
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<project name="build-ivy" default="go" xmlns:ivy="antlib:org.apache.ivy.ant">
<!--
More information can be found at http://ant.apache.org/ivy/
-->
<!-- here is the version of ivy we will use. change this property to try a newer
version if you want -->
<property name="ivy.install.version" value="2.4.0" />
<property name="ivy.jar.dir" value="${basedir}/ivy" />
<property name="ivy.jar.file" value="${ivy.jar.dir}/ivy.jar" />
<property name="build.dir" value="build" />
<property name="src.dir" value="src" />
<target name="download-ivy" unless="skip.download">
<mkdir dir="${ivy.jar.dir}"/>
<!-- download Ivy from artifactory so that it can be used even without any special installation -->
<echo message="installing ivy..."/>
<get src="https://artifactory.company.com/artifactory/virtual-maven/org/apache/ivy/ivy/${ivy.install.version}/ivy-${ivy.install.version}.jar"
dest="${ivy.jar.file}" usetimestamp="true" username="svcbuild" password="**********************"/>
</target>
<!-- =================================
target: install-ivy
this target is not necessary if you put ivy.jar in your ant lib directory
if you already have ivy in your ant lib, you can simply remove this
target and the dependency the 'go' target has on it
================================= -->
<target name="install-ivy" depends="download-ivy" description="--> install ivy">
<!-- try to load ivy here from local ivy dir, in case the user has not already dropped
it into ant's lib dir (note that the latter copy will always take precedence).
We will not fail as long as local lib dir exists (it may be empty) and
ivy is in at least one of ant's lib dir or the local lib dir. -->
<path id="ivy.lib.path">
<fileset dir="${ivy.jar.dir}" includes="*.jar"/>
</path>
<taskdef resource="org/apache/ivy/ant/antlib.xml"
uri="antlib:org.apache.ivy.ant" classpathref="ivy.lib.path"/>
</target>
<!-- =================================
target: go
Go ivy, go!
================================= -->
<target name="go" depends="install-ivy"
description="--> create and publish">
<property environment="env"/>
<fail unless="env.PUBREVISION" message="no publish revision set!"/>
<ivy:resolve/>
<ivy:publish resolver="components" pubrevision="${env.PUBREVISION}">
<artifacts pattern="../Java/build_*/Release/[artifact].[ext]"/>
</ivy:publish>
</target>
<!-- =================================
target: clean
================================= -->
<target name="clean" description="--> clean the project">
<delete includeemptydirs="true" quiet="true">
<fileset dir="${src.dir}" />
<fileset dir="${build.dir}" />
</delete>
</target>
<!-- =================================
target: clean-ivy
================================= -->
<target name="clean-ivy" description="--> clean the ivy installation">
<delete dir="${ivy.jar.dir}"/>
</target>
<!-- =================================
target: clean-cache
================================= -->
<target name="clean-cache" depends="install-ivy"
description="--> clean the ivy cache">
<ivy:cleancache />
</target>
</project>
基本上我只想知道为什么我的通配符“*”不起作用以及如何修复它。
当 运行 连接我的管道时，我 运行 遇到无法识别通配符的问题：
[ivy:publish] :: delivering :: COMPANY#some.product;working@BUILD_PC :: 02.14Test11 :: integration :: Fri Feb 09 09:13:36 CET 2018
[ivy:publish] options = status=integration pubdate=Fri Feb 09 09:13:36 CET 2018 validate=true resolveDynamicRevisions=true merge=true resolveId=null pubBranch=null
[ivy:publish] delivering ivy file to D:\gr\buildsd9e5594[=13=]\plast\products\some.product\Java\build_*\Release\ivy.xml
BUILD FAILED
D:\gr\buildsd9e5594[=13=]\plast\products\some.product\ivy\build.xml:70: COMPANY#some.product;working@BUILD_PC: java.io.FileNotFoundException: D:\gr\buildsd9e5594[=13=]\plast\products\some.product\Java\build_*\Release\ivy.xml (The filename, directory name, or volume label syntax is incorrect)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:212)
at java.io.FileOutputStream.<init>(FileOutputStream.java:165)
at org.apache.ivy.plugins.parser.xml.XmlModuleDescriptorUpdater.update(XmlModuleDescriptorUpdater.java:135)
at org.apache.ivy.core.deliver.DeliverEngine.deliver(DeliverEngine.java:207)
at org.apache.ivy.Ivy.deliver(Ivy.java:607)
at org.apache.ivy.ant.IvyDeliver.doExecute(IvyDeliver.java:420)
at org.apache.ivy.ant.IvyTask.execute(IvyTask.java:271)
at org.apache.ivy.ant.IvyPublish.doExecute(IvyPublish.java:308)
at org.apache.ivy.ant.IvyTask.execute(IvyTask.java:271)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:293)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:435)
at org.apache.tools.ant.Target.performTasks(Target.java:456)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1405)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Ivy.xml 根据要求（注意我替换了公司和产品名称！）：
<ivy-module version="2.0">
<info organisation="MyOrganisation" module="Organisation.product" />
<publications>
<artifact name="Data1" ext="cab" type="binaries" />
<artifact name="Organisation product" ext="msi" type="binaries" />
<artifact name="setup" ext="exe" type="binaries" />
<artifact name="splash" ext="bmp" type="binaries" />
<artifact name="Java/jre-8u131-windows-i586" ext="exe" type="binaries" />
<artifact name="ProdA RemTool/Data1" ext="cab" type="binaries" />
<artifact name="ProdA RemTool/ProdA RemTool 01.36" ext="msi" type="binaries" />
<artifact name="ProdA RemTool/setup" ext="exe" type="binaries" />
<artifact name="ProdA RemTool/splash" ext="png" type="binaries" />
<artifact name="ProdA RemTool/viewsimba.splash" ext="bmp" type="binaries" />
</publications>
</ivy-module>
我的问题的解决方案是像这样修复构建路径：
<artifacts pattern="../Java/build_${env.PUBREVISION}/Release/[artifact].[ext]"/>
因为 ${env.PUBREVISION}/ 包含 TAG，它是我的构建文件夹 :)
我想用 ivy 发布我的工件，但我的构建路径是动态的而不是静态的，因为它包含版本标签，即："build_02.14Test3".
这是我的 build.xml:
<target name="go" depends="install-ivy"
description="--> create and publish">
<property environment="env"/>
<fail unless="env.PUBREVISION" message="no publish revision set!"/>
<ivy:resolve/>
<ivy:publish resolver="components" pubrevision="${env.PUBREVISION}">
<artifacts pattern="../Java/build_*/Release/[artifact].[ext]"/>
</ivy:publish>
</target>
整个build.xml文件：
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<project name="build-ivy" default="go" xmlns:ivy="antlib:org.apache.ivy.ant">
<!--
More information can be found at http://ant.apache.org/ivy/
-->
<!-- here is the version of ivy we will use. change this property to try a newer
version if you want -->
<property name="ivy.install.version" value="2.4.0" />
<property name="ivy.jar.dir" value="${basedir}/ivy" />
<property name="ivy.jar.file" value="${ivy.jar.dir}/ivy.jar" />
<property name="build.dir" value="build" />
<property name="src.dir" value="src" />
<target name="download-ivy" unless="skip.download">
<mkdir dir="${ivy.jar.dir}"/>
<!-- download Ivy from artifactory so that it can be used even without any special installation -->
<echo message="installing ivy..."/>
<get src="https://artifactory.company.com/artifactory/virtual-maven/org/apache/ivy/ivy/${ivy.install.version}/ivy-${ivy.install.version}.jar"
dest="${ivy.jar.file}" usetimestamp="true" username="svcbuild" password="**********************"/>
</target>
<!-- =================================
target: install-ivy
this target is not necessary if you put ivy.jar in your ant lib directory
if you already have ivy in your ant lib, you can simply remove this
target and the dependency the 'go' target has on it
================================= -->
<target name="install-ivy" depends="download-ivy" description="--> install ivy">
<!-- try to load ivy here from local ivy dir, in case the user has not already dropped
it into ant's lib dir (note that the latter copy will always take precedence).
We will not fail as long as local lib dir exists (it may be empty) and
ivy is in at least one of ant's lib dir or the local lib dir. -->
<path id="ivy.lib.path">
<fileset dir="${ivy.jar.dir}" includes="*.jar"/>
</path>
<taskdef resource="org/apache/ivy/ant/antlib.xml"
uri="antlib:org.apache.ivy.ant" classpathref="ivy.lib.path"/>
</target>
<!-- =================================
target: go
Go ivy, go!
================================= -->
<target name="go" depends="install-ivy"
description="--> create and publish">
<property environment="env"/>
<fail unless="env.PUBREVISION" message="no publish revision set!"/>
<ivy:resolve/>
<ivy:publish resolver="components" pubrevision="${env.PUBREVISION}">
<artifacts pattern="../Java/build_*/Release/[artifact].[ext]"/>
</ivy:publish>
</target>
<!-- =================================
target: clean
================================= -->
<target name="clean" description="--> clean the project">
<delete includeemptydirs="true" quiet="true">
<fileset dir="${src.dir}" />
<fileset dir="${build.dir}" />
</delete>
</target>
<!-- =================================
target: clean-ivy
================================= -->
<target name="clean-ivy" description="--> clean the ivy installation">
<delete dir="${ivy.jar.dir}"/>
</target>
<!-- =================================
target: clean-cache
================================= -->
<target name="clean-cache" depends="install-ivy"
description="--> clean the ivy cache">
<ivy:cleancache />
</target>
</project>
基本上我只想知道为什么我的通配符“*”不起作用以及如何修复它。
当 运行 连接我的管道时，我 运行 遇到无法识别通配符的问题：
[ivy:publish] :: delivering :: COMPANY#some.product;working@BUILD_PC :: 02.14Test11 :: integration :: Fri Feb 09 09:13:36 CET 2018
[ivy:publish] options = status=integration pubdate=Fri Feb 09 09:13:36 CET 2018 validate=true resolveDynamicRevisions=true merge=true resolveId=null pubBranch=null
[ivy:publish] delivering ivy file to D:\gr\buildsd9e5594[=13=]\plast\products\some.product\Java\build_*\Release\ivy.xml
BUILD FAILED
D:\gr\buildsd9e5594[=13=]\plast\products\some.product\ivy\build.xml:70: COMPANY#some.product;working@BUILD_PC: java.io.FileNotFoundException: D:\gr\buildsd9e5594[=13=]\plast\products\some.product\Java\build_*\Release\ivy.xml (The filename, directory name, or volume label syntax is incorrect)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:212)
at java.io.FileOutputStream.<init>(FileOutputStream.java:165)
at org.apache.ivy.plugins.parser.xml.XmlModuleDescriptorUpdater.update(XmlModuleDescriptorUpdater.java:135)
at org.apache.ivy.core.deliver.DeliverEngine.deliver(DeliverEngine.java:207)
at org.apache.ivy.Ivy.deliver(Ivy.java:607)
at org.apache.ivy.ant.IvyDeliver.doExecute(IvyDeliver.java:420)
at org.apache.ivy.ant.IvyTask.execute(IvyTask.java:271)
at org.apache.ivy.ant.IvyPublish.doExecute(IvyPublish.java:308)
at org.apache.ivy.ant.IvyTask.execute(IvyTask.java:271)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:293)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:435)
at org.apache.tools.ant.Target.performTasks(Target.java:456)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1405)
at org.apache.tools.ant.Project.executeTarget(Project.java:1376)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1260)
at org.apache.tools.ant.Main.runBuild(Main.java:857)
at org.apache.tools.ant.Main.startAnt(Main.java:236)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:287)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:113)
Ivy.xml 根据要求（注意我替换了公司和产品名称！）：
<ivy-module version="2.0">
<info organisation="MyOrganisation" module="Organisation.product" />
<publications>
<artifact name="Data1" ext="cab" type="binaries" />
<artifact name="Organisation product" ext="msi" type="binaries" />
<artifact name="setup" ext="exe" type="binaries" />
<artifact name="splash" ext="bmp" type="binaries" />
<artifact name="Java/jre-8u131-windows-i586" ext="exe" type="binaries" />
<artifact name="ProdA RemTool/Data1" ext="cab" type="binaries" />
<artifact name="ProdA RemTool/ProdA RemTool 01.36" ext="msi" type="binaries" />
<artifact name="ProdA RemTool/setup" ext="exe" type="binaries" />
<artifact name="ProdA RemTool/splash" ext="png" type="binaries" />
<artifact name="ProdA RemTool/viewsimba.splash" ext="bmp" type="binaries" />
</publications>
</ivy-module>
我的问题的解决方案是像这样修复构建路径：
<artifacts pattern="../Java/build_${env.PUBREVISION}/Release/[artifact].[ext]"/>
因为 ${env.PUBREVISION}/ 包含 TAG，它是我的构建文件夹 :)