使用异步的 Libusb 竞争条件 I/O
Libusb race condition using asynchronous I/O
我正在使用 libusb 与配置为 USB 设备的飞利浦 ISP1362 进行通信。我能够使用同步 I/O 成功环回数据,没有任何问题。出于某种原因,在使用异步 I/O 时似乎存在竞争条件。
我正在使用背靠背 OUT-IN 传输来传输 64 字节数据包。有时,当我 运行 我的程序 libusb 抛出超时错误并且一些环回数据丢失时。在使用我的 Beagle 12 分析 USB 总线时,我可以看到 OUT-IN 事务在应该是(OUT-IN-OUT-IN)时出现了乱序(即 OUT-OUT-IN-TIMEOUT)。
更新 传输在回调函数中出现乱序,这很奇怪,因为它们与总线分析器上的实际情况不一致。
示例 1:(进-出-进-出)
main(): submitting transfer 0, endpoint 1
main(): submitting transfer 1, endpoint 82
main(): submitting transfer 2, endpoint 1
main(): submitting transfer 3, endpoint 82
xfr_cb(): count 0, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 1, status = 0, endpoint = 1, actual_length = 64, completed = 0
xfr_cb(): count 2, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 3, status = 0, endpoint = 1, actual_length = 64, completed = 0
completed
示例 2:(出-入-出)
main(): submitting transfer 0, endpoint 1
main(): submitting transfer 1, endpoint 82
main(): submitting transfer 2, endpoint 1
main(): submitting transfer 3, endpoint 82
xfr_cb(): count 0, status = 0, endpoint = 1, actual_length = 64, completed = 0
xfr_cb(): count 1, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 2, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 3, status = 0, endpoint = 1, actual_length = 64, completed = 0
completed
下面是分析器的截图:
代码如下:
#include <stdlib.h>
#include <stdio.h>
#include <libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 4 // number of transfers
#define BYTES EP_SIZE*TRANSFERS
#define TIMEOUT 3*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *devh = NULL;
/* use a global variable to keep the context */
static struct libusb_context *usb_context = NULL;
/* count variable */
int count = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
void xfr_cb(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
/* callback - This is called after the transfer has been received by libusb */
fprintf(stderr, "xfr_cb(): count %d, status = %d, endpoint = %x, actual_length = %d, completed = %d\n",
count,
transfer->status,
transfer->endpoint,
transfer->actual_length,
*completed);
if (transfer->status != LIBUSB_TRANSFER_COMPLETED)
{
/* Error! */
fprintf(stderr, "Error: %s\n", libusb_error_name((int)transfer->status));
}
if (count == TRANSFERS-1)
*completed = 1;
count++;
}
int main(int argc, char **argv)
{
int ep_addr;
int completed = 0;
unsigned char *buf;
size_t length = 64;
int n;
int i;
int rc;
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
devh = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!devh)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* allocate memory */
buf = malloc(length);
/* start with OUT transfer */
ep_addr = ep_out;
/* queue up alternating OUT-IN transfers */
for (i = 0; i < TRANSFERS; i++)
{
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE; n++)
{
buf[n] = i+n;
}
/* Set up the transfer object */
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, devh, ep_addr, buf, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
/* Submit the transfer object */
libusb_submit_transfer(transfer);
fprintf(stderr, "main(): submitting transfer %d, endpoint %x\n", i, ep_addr);
/* alternate writing and reading for loopback */
ep_addr = (ep_addr == ep_out) ? ep_in : ep_out;
}
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc < 0)
{
if (rc == LIBUSB_ERROR_INTERRUPTED)
continue;
fprintf(stderr, "Transfer Error: %s", libusb_error_name(rc));
continue;
}
}
fprintf(stderr, "completed\n");
/* Release the interface */
libusb_release_interface(devh, 0);
/* Close the device handle */
if (devh)
libusb_close(devh);
out:
if (devh)
{
libusb_close(devh);
}
libusb_exit(NULL);
return rc;
}
更新2 我成功消除了超时。 libusb 超时的原因是主机在总线上间歇性地发送两个连续的 OUT 事务。
分析器截图:
以下是工作代码(无超时)。 运行 这几千次都没有问题
static void LIBUSB_CALL xfr_cb(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
unsigned char *wbuf, *rbuf;
size_t length = 64;
fprintf(stderr, "xfr_cb(): status = %d, endpoint = %x, actual_length = %d\n",
transfer->status,
transfer->endpoint,
transfer->actual_length);
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int ep_addr;
int completed = 0;
unsigned char *buf, *wbuf1, *wbuf2, *rbuf1, *rbuf2;
size_t length = 64;
int n;
int m;
int i;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
wbuf1 = malloc(length);
wbuf2 = malloc(length);
rbuf1 = malloc(length);
rbuf2 = malloc(length);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE; n++)
wbuf1[n] = n;
for (m = 0; m < EP_SIZE; m++)
wbuf2[m] = m+1;
struct libusb_transfer *transfer1;
struct libusb_transfer *transfer2;
struct libusb_transfer *transfer3;
struct libusb_transfer *transfer4;
/* Set up the transfer object */
transfer1 = libusb_alloc_transfer(0);
transfer2 = libusb_alloc_transfer(0);
transfer3 = libusb_alloc_transfer(0);
transfer4 = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer1, handle, ep_out, wbuf1, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer2, handle, ep_in, rbuf1, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer3, handle, ep_out, wbuf2, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer4, handle, ep_in, rbuf2, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
/* Submit the transfers */
libusb_submit_transfer(transfer1);
libusb_submit_transfer(transfer2);
libusb_submit_transfer(transfer3);
libusb_submit_transfer(transfer4);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
如下更改代码(即 callback = NULL for transfer 1-3)重新创建间歇性重复事务,如屏幕截图所示。
libusb_fill_bulk_transfer(transfer1, handle, ep_out, wbuf1, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer2, handle, ep_in, rbuf1, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer3, handle, ep_out, wbuf2, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer4, handle, ep_in, rbuf2, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
老实说,根据他们的文档和示例,我不明白为什么循环会导致竞争条件。在 libusb 示例 (sam3u_benchmark.c) 之一中实际上建议对多个传输进行排队,并且还在以下 .pdf 中演示(使用循环)。
参见异步 I/O 部分:
https://www.socallinuxexpo.org/sites/default/files/presentations/scale_2017_usb.pdf
http://www.signal11.us/oss/elc2014/elc_2014_usb_0.pdf
根据我的理解,使用 libusb_handle_events_completed(NULL, &completed) 应该可以解决同步问题。我误会了什么吗?
从多个线程中查看libusb_handle_events()
http://libusb.sourceforge.net/api-1.0/libusb_mtasync.html
-"This is why libusb-1.0.9 introduces the new libusb_handle_events_timeout_completed() and libusb_handle_events_completed() functions, which handles doing the completion check for you after they have acquired the lock:"
他们需要的是 crystal 如何使用他们 API 的清晰示例。
我可以添加更多事件检查,但这里似乎有些不对。
更新 3: 查看已接受的答案。
更新: 查看已接受的答案。
下面是一个使用同步的例子I/O。我在使用异步 I/O 让交易按预期顺序出现时遇到了很多麻烦。我认为这是由于@Gene 提到的转会相互竞争造成的。
我对 libusb 的主要抱怨 API 是缺少说明正确使用的示例。 API 会让人相信异步事务是按照它们 "submitted" 的顺序放在总线上的,据我所知,这是不正确的。此功能适用于使用所有相同的数据包令牌(即 OUT 或 IN)提交交易。
以下代码适用于大批量传输。
使用同步I/O
#include <stdlib.h>
#include <stdio.h>
#include <libusb-1.0/libusb.h>
/* Change VENDOR_ID and PRODUCT_ID depending on device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define BYTES 1024*768*3 // bytes
#define EP_SIZE 64 // bytes
#define TIMEOUT 5*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *devh = NULL;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in_addr = 0x82;
static int ep_out_addr = 0x01;
int write_chars(unsigned char * data, int length)
{
/* To send a char to the device simply initiate a bulk_transfer to the Endpoint
* with the address ep_out_addr.
*/
int actual_length;
int rc = libusb_bulk_transfer(devh, ep_out_addr, data, length, &actual_length, TIMEOUT);
if (rc < 0)
{
fprintf(stderr, "Error while sending char: %d\n", rc);
return -1;
}
return actual_length;
}
int read_chars(unsigned char * data, int length)
{
/* To receive characters from the device initiate a bulk_transfer to the Entpoint
* with address ep_in_addr
*/
int actual_length;
int rc = libusb_bulk_transfer(devh, ep_in_addr, data, length, &actual_length, TIMEOUT);
if (rc == LIBUSB_ERROR_TIMEOUT)
{
printf("timeout (%d)\n", actual_length);
return -1;
}
else if (rc < 0)
{
fprintf(stderr, "Error while waiting for char: %d\n", rc);
return -1;
}
return actual_length;
}
int main(int argc, char **argv)
{
int rc;
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
devh = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!devh)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* We can now start sending or receiving data to the device */
unsigned char buf[BYTES];
unsigned char rbuf[EP_SIZE];
int len;
int n;
int l;
int res;
// fill buffer
for (n = 0; n < BYTES; n++)
{
buf[n] = 0x00+n;
}
// loopback data, write-read
for (l = 0; l < BYTES/EP_SIZE; l++)
{
len = write_chars(buf+l*EP_SIZE, EP_SIZE);
len = read_chars(rbuf, EP_SIZE);
res = memcmp(rbuf, buf+l*EP_SIZE, sizeof(rbuf));
if (res != 0)
fprintf(stderr, "Miscompare: block %d\n", l);
}
libusb_release_interface(devh, 0);
out:
if (devh)
{
libusb_close(devh);
}
libusb_exit(NULL);
return rc;
}
同时使用异步和同步(即异步提交OUT,同步提交IN)
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define BYTES EP_SIZE*TRANSFERS
#define TIMEOUT 15*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variable */
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char wbuf[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
count_out++;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
unsigned char *buf, *rbuf_tmp;
size_t length = 64;
int n;
int i;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
buf = malloc(length*TRANSFERS);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE*TRANSFERS; n++)
{
buf[n] = n;
}
/* allocate memory */
rbuf_tmp = malloc(length);
/* set up alternating OUT-IN transfers */
for (i = 0; i < TRANSFERS; i++)
{
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, buf+i, EP_SIZE, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
int actual_length;
int rc = libusb_bulk_transfer(handle, ep_in, rbuf_tmp, EP_SIZE, &actual_length, TIMEOUT);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
memcpy(rbuf+i*EP_SIZE, rbuf_tmp, EP_SIZE);
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
以上代码是一个实验,看看性能是否有所提高。有趣的是,两者之间的速度差异可以忽略不计。
libusb 版本为 1.0.17.10830
我开始阅读 libusb 源代码中的文档并了解发生了什么。
特别是关于 libusb 如何处理数据包大小的部分:
http://libusb.sourceforge.net/api-1.0/libusb_packetoverflow.html
读完后我很受用,我发现了两种使用异步 I/O 来完成大数据环回测试的方法。
第一种方式是连续提交两个传输,传输->缓冲区包含整个数据结构(即发送和接收的总字节数)。第二种方式是使用包含 wMaxPacketSize(例如 64 字节)的 transfer->buffer 提交两个传输,并让 out 和 in 回调函数提交额外的传输以收发其余数据。
对于第二种情况,需要添加额外的代码来跟踪传输次数并在完成时设置完成信号。 OUT-IN 数据包交错由 libusb 和 OS 处理——这是我没有意识到的部分。换句话说,并非每个 OUT-IN 传输都需要单独指定和排队。
这是异步代码以及我的 USB 设备 (ISP1362) 的传输速率。我的 USB 设备控制器是用纯 SystemVerilog 编码的 FPGA。
注意:关于传输速率,我只在 BULK_EP_IN 上启用了 double-buffering。如果在 BULK_EP_OUT 上启用 double-buffering,我假设 IN-NAK 的 (# POLL) 和传输速率在第二种方法中会提高。因此,由于设备配置,这可能不是一个公平的比较。
第一种方法:~1.161 MB/s (~9.288 Mb/s)
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define TIMEOUT 10*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variables */
unsigned int count = 0;
unsigned int count_in = 0;
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
/* Write and Read buffers */
unsigned char wbuf[EP_SIZE*TRANSFERS];
unsigned char wbuf_tmp[EP_SIZE*TRANSFERS];
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char rbuf_tmp[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
}
static void LIBUSB_CALL xfr_cb_in(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
memcpy(rbuf+count_in*EP_SIZE, transfer->buffer, EP_SIZE);
count_in++; // one transfer complete
if (count_in < TRANSFERS)
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int completed = 0;
size_t length = 64;
int n;
int m;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* fill the buffer with incrementing data */
for (n = 0; n < TRANSFERS; n++)
{
for (m = 0; m < EP_SIZE; m++)
{
wbuf_tmp[m+n*EP_SIZE] = m+n;
}
}
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, wbuf_tmp, EP_SIZE*TRANSFERS, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_in, rbuf_tmp, EP_SIZE*TRANSFERS, xfr_cb_in, &completed, TIMEOUT);
libusb_submit_transfer(transfer);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
else
fprintf(stderr, "success\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
第二种方法:~755.9 MB/s (~6.047 Mb/s)
include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define TIMEOUT 10*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variables */
unsigned int count = 0;
unsigned int count_in = 0;
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
/* Write and Read buffers */
unsigned char wbuf[EP_SIZE*TRANSFERS];
unsigned char *wbuf_tmp;
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char rbuf_tmp[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
count_out++; // one transfer complete
if (count_out < TRANSFERS)
{
transfer->buffer = ++wbuf_tmp;
libusb_submit_transfer(transfer);
}
}
static void LIBUSB_CALL xfr_cb_in(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
memcpy(rbuf+count_in*EP_SIZE, transfer->buffer, EP_SIZE);
count_in++; // one transfer complete
if (count_in < TRANSFERS)
libusb_submit_transfer(transfer);
else
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int completed = 0;
size_t length = 64;
int n;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
wbuf_tmp = malloc(length*TRANSFERS);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE*TRANSFERS; n++)
{
wbuf_tmp[n] = n;
}
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, wbuf_tmp, EP_SIZE, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_in, rbuf_tmp, EP_SIZE, xfr_cb_in, &completed, TIMEOUT);
libusb_submit_transfer(transfer);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
else
fprintf(stderr, "success\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
我正在使用 libusb 与配置为 USB 设备的飞利浦 ISP1362 进行通信。我能够使用同步 I/O 成功环回数据,没有任何问题。出于某种原因,在使用异步 I/O 时似乎存在竞争条件。
我正在使用背靠背 OUT-IN 传输来传输 64 字节数据包。有时,当我 运行 我的程序 libusb 抛出超时错误并且一些环回数据丢失时。在使用我的 Beagle 12 分析 USB 总线时,我可以看到 OUT-IN 事务在应该是(OUT-IN-OUT-IN)时出现了乱序(即 OUT-OUT-IN-TIMEOUT)。
更新 传输在回调函数中出现乱序,这很奇怪,因为它们与总线分析器上的实际情况不一致。
示例 1:(进-出-进-出)
main(): submitting transfer 0, endpoint 1
main(): submitting transfer 1, endpoint 82
main(): submitting transfer 2, endpoint 1
main(): submitting transfer 3, endpoint 82
xfr_cb(): count 0, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 1, status = 0, endpoint = 1, actual_length = 64, completed = 0
xfr_cb(): count 2, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 3, status = 0, endpoint = 1, actual_length = 64, completed = 0
completed
示例 2:(出-入-出)
main(): submitting transfer 0, endpoint 1
main(): submitting transfer 1, endpoint 82
main(): submitting transfer 2, endpoint 1
main(): submitting transfer 3, endpoint 82
xfr_cb(): count 0, status = 0, endpoint = 1, actual_length = 64, completed = 0
xfr_cb(): count 1, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 2, status = 0, endpoint = 82, actual_length = 64, completed = 0
xfr_cb(): count 3, status = 0, endpoint = 1, actual_length = 64, completed = 0
completed
下面是分析器的截图:
代码如下:
#include <stdlib.h>
#include <stdio.h>
#include <libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 4 // number of transfers
#define BYTES EP_SIZE*TRANSFERS
#define TIMEOUT 3*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *devh = NULL;
/* use a global variable to keep the context */
static struct libusb_context *usb_context = NULL;
/* count variable */
int count = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
void xfr_cb(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
/* callback - This is called after the transfer has been received by libusb */
fprintf(stderr, "xfr_cb(): count %d, status = %d, endpoint = %x, actual_length = %d, completed = %d\n",
count,
transfer->status,
transfer->endpoint,
transfer->actual_length,
*completed);
if (transfer->status != LIBUSB_TRANSFER_COMPLETED)
{
/* Error! */
fprintf(stderr, "Error: %s\n", libusb_error_name((int)transfer->status));
}
if (count == TRANSFERS-1)
*completed = 1;
count++;
}
int main(int argc, char **argv)
{
int ep_addr;
int completed = 0;
unsigned char *buf;
size_t length = 64;
int n;
int i;
int rc;
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
devh = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!devh)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* allocate memory */
buf = malloc(length);
/* start with OUT transfer */
ep_addr = ep_out;
/* queue up alternating OUT-IN transfers */
for (i = 0; i < TRANSFERS; i++)
{
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE; n++)
{
buf[n] = i+n;
}
/* Set up the transfer object */
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, devh, ep_addr, buf, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
/* Submit the transfer object */
libusb_submit_transfer(transfer);
fprintf(stderr, "main(): submitting transfer %d, endpoint %x\n", i, ep_addr);
/* alternate writing and reading for loopback */
ep_addr = (ep_addr == ep_out) ? ep_in : ep_out;
}
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc < 0)
{
if (rc == LIBUSB_ERROR_INTERRUPTED)
continue;
fprintf(stderr, "Transfer Error: %s", libusb_error_name(rc));
continue;
}
}
fprintf(stderr, "completed\n");
/* Release the interface */
libusb_release_interface(devh, 0);
/* Close the device handle */
if (devh)
libusb_close(devh);
out:
if (devh)
{
libusb_close(devh);
}
libusb_exit(NULL);
return rc;
}
更新2 我成功消除了超时。 libusb 超时的原因是主机在总线上间歇性地发送两个连续的 OUT 事务。
分析器截图:
以下是工作代码(无超时)。 运行 这几千次都没有问题
static void LIBUSB_CALL xfr_cb(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
unsigned char *wbuf, *rbuf;
size_t length = 64;
fprintf(stderr, "xfr_cb(): status = %d, endpoint = %x, actual_length = %d\n",
transfer->status,
transfer->endpoint,
transfer->actual_length);
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int ep_addr;
int completed = 0;
unsigned char *buf, *wbuf1, *wbuf2, *rbuf1, *rbuf2;
size_t length = 64;
int n;
int m;
int i;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
wbuf1 = malloc(length);
wbuf2 = malloc(length);
rbuf1 = malloc(length);
rbuf2 = malloc(length);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE; n++)
wbuf1[n] = n;
for (m = 0; m < EP_SIZE; m++)
wbuf2[m] = m+1;
struct libusb_transfer *transfer1;
struct libusb_transfer *transfer2;
struct libusb_transfer *transfer3;
struct libusb_transfer *transfer4;
/* Set up the transfer object */
transfer1 = libusb_alloc_transfer(0);
transfer2 = libusb_alloc_transfer(0);
transfer3 = libusb_alloc_transfer(0);
transfer4 = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer1, handle, ep_out, wbuf1, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer2, handle, ep_in, rbuf1, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer3, handle, ep_out, wbuf2, EP_SIZE, xfr_cb, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer4, handle, ep_in, rbuf2, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
/* Submit the transfers */
libusb_submit_transfer(transfer1);
libusb_submit_transfer(transfer2);
libusb_submit_transfer(transfer3);
libusb_submit_transfer(transfer4);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
如下更改代码(即 callback = NULL for transfer 1-3)重新创建间歇性重复事务,如屏幕截图所示。
libusb_fill_bulk_transfer(transfer1, handle, ep_out, wbuf1, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer2, handle, ep_in, rbuf1, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer3, handle, ep_out, wbuf2, EP_SIZE, NULL, NULL, TIMEOUT);
libusb_fill_bulk_transfer(transfer4, handle, ep_in, rbuf2, EP_SIZE, xfr_cb, &completed, TIMEOUT); /* callback data = &completed */
老实说,根据他们的文档和示例,我不明白为什么循环会导致竞争条件。在 libusb 示例 (sam3u_benchmark.c) 之一中实际上建议对多个传输进行排队,并且还在以下 .pdf 中演示(使用循环)。
参见异步 I/O 部分:
https://www.socallinuxexpo.org/sites/default/files/presentations/scale_2017_usb.pdf http://www.signal11.us/oss/elc2014/elc_2014_usb_0.pdf
根据我的理解,使用 libusb_handle_events_completed(NULL, &completed) 应该可以解决同步问题。我误会了什么吗? 从多个线程中查看libusb_handle_events() http://libusb.sourceforge.net/api-1.0/libusb_mtasync.html
-"This is why libusb-1.0.9 introduces the new libusb_handle_events_timeout_completed() and libusb_handle_events_completed() functions, which handles doing the completion check for you after they have acquired the lock:"
他们需要的是 crystal 如何使用他们 API 的清晰示例。
我可以添加更多事件检查,但这里似乎有些不对。
更新 3: 查看已接受的答案。
更新: 查看已接受的答案。
下面是一个使用同步的例子I/O。我在使用异步 I/O 让交易按预期顺序出现时遇到了很多麻烦。我认为这是由于@Gene 提到的转会相互竞争造成的。
我对 libusb 的主要抱怨 API 是缺少说明正确使用的示例。 API 会让人相信异步事务是按照它们 "submitted" 的顺序放在总线上的,据我所知,这是不正确的。此功能适用于使用所有相同的数据包令牌(即 OUT 或 IN)提交交易。
以下代码适用于大批量传输。
使用同步I/O
#include <stdlib.h>
#include <stdio.h>
#include <libusb-1.0/libusb.h>
/* Change VENDOR_ID and PRODUCT_ID depending on device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define BYTES 1024*768*3 // bytes
#define EP_SIZE 64 // bytes
#define TIMEOUT 5*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *devh = NULL;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in_addr = 0x82;
static int ep_out_addr = 0x01;
int write_chars(unsigned char * data, int length)
{
/* To send a char to the device simply initiate a bulk_transfer to the Endpoint
* with the address ep_out_addr.
*/
int actual_length;
int rc = libusb_bulk_transfer(devh, ep_out_addr, data, length, &actual_length, TIMEOUT);
if (rc < 0)
{
fprintf(stderr, "Error while sending char: %d\n", rc);
return -1;
}
return actual_length;
}
int read_chars(unsigned char * data, int length)
{
/* To receive characters from the device initiate a bulk_transfer to the Entpoint
* with address ep_in_addr
*/
int actual_length;
int rc = libusb_bulk_transfer(devh, ep_in_addr, data, length, &actual_length, TIMEOUT);
if (rc == LIBUSB_ERROR_TIMEOUT)
{
printf("timeout (%d)\n", actual_length);
return -1;
}
else if (rc < 0)
{
fprintf(stderr, "Error while waiting for char: %d\n", rc);
return -1;
}
return actual_length;
}
int main(int argc, char **argv)
{
int rc;
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
devh = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!devh)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* We can now start sending or receiving data to the device */
unsigned char buf[BYTES];
unsigned char rbuf[EP_SIZE];
int len;
int n;
int l;
int res;
// fill buffer
for (n = 0; n < BYTES; n++)
{
buf[n] = 0x00+n;
}
// loopback data, write-read
for (l = 0; l < BYTES/EP_SIZE; l++)
{
len = write_chars(buf+l*EP_SIZE, EP_SIZE);
len = read_chars(rbuf, EP_SIZE);
res = memcmp(rbuf, buf+l*EP_SIZE, sizeof(rbuf));
if (res != 0)
fprintf(stderr, "Miscompare: block %d\n", l);
}
libusb_release_interface(devh, 0);
out:
if (devh)
{
libusb_close(devh);
}
libusb_exit(NULL);
return rc;
}
同时使用异步和同步(即异步提交OUT,同步提交IN)
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define BYTES EP_SIZE*TRANSFERS
#define TIMEOUT 15*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variable */
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char wbuf[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
count_out++;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
unsigned char *buf, *rbuf_tmp;
size_t length = 64;
int n;
int i;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
buf = malloc(length*TRANSFERS);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE*TRANSFERS; n++)
{
buf[n] = n;
}
/* allocate memory */
rbuf_tmp = malloc(length);
/* set up alternating OUT-IN transfers */
for (i = 0; i < TRANSFERS; i++)
{
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, buf+i, EP_SIZE, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
int actual_length;
int rc = libusb_bulk_transfer(handle, ep_in, rbuf_tmp, EP_SIZE, &actual_length, TIMEOUT);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
memcpy(rbuf+i*EP_SIZE, rbuf_tmp, EP_SIZE);
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
以上代码是一个实验,看看性能是否有所提高。有趣的是,两者之间的速度差异可以忽略不计。
libusb 版本为 1.0.17.10830
我开始阅读 libusb 源代码中的文档并了解发生了什么。
特别是关于 libusb 如何处理数据包大小的部分: http://libusb.sourceforge.net/api-1.0/libusb_packetoverflow.html
读完后我很受用,我发现了两种使用异步 I/O 来完成大数据环回测试的方法。
第一种方式是连续提交两个传输,传输->缓冲区包含整个数据结构(即发送和接收的总字节数)。第二种方式是使用包含 wMaxPacketSize(例如 64 字节)的 transfer->buffer 提交两个传输,并让 out 和 in 回调函数提交额外的传输以收发其余数据。
对于第二种情况,需要添加额外的代码来跟踪传输次数并在完成时设置完成信号。 OUT-IN 数据包交错由 libusb 和 OS 处理——这是我没有意识到的部分。换句话说,并非每个 OUT-IN 传输都需要单独指定和排队。
这是异步代码以及我的 USB 设备 (ISP1362) 的传输速率。我的 USB 设备控制器是用纯 SystemVerilog 编码的 FPGA。
注意:关于传输速率,我只在 BULK_EP_IN 上启用了 double-buffering。如果在 BULK_EP_OUT 上启用 double-buffering,我假设 IN-NAK 的 (# POLL) 和传输速率在第二种方法中会提高。因此,由于设备配置,这可能不是一个公平的比较。
第一种方法:~1.161 MB/s (~9.288 Mb/s)
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define TIMEOUT 10*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variables */
unsigned int count = 0;
unsigned int count_in = 0;
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
/* Write and Read buffers */
unsigned char wbuf[EP_SIZE*TRANSFERS];
unsigned char wbuf_tmp[EP_SIZE*TRANSFERS];
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char rbuf_tmp[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
}
static void LIBUSB_CALL xfr_cb_in(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
memcpy(rbuf+count_in*EP_SIZE, transfer->buffer, EP_SIZE);
count_in++; // one transfer complete
if (count_in < TRANSFERS)
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int completed = 0;
size_t length = 64;
int n;
int m;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* fill the buffer with incrementing data */
for (n = 0; n < TRANSFERS; n++)
{
for (m = 0; m < EP_SIZE; m++)
{
wbuf_tmp[m+n*EP_SIZE] = m+n;
}
}
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, wbuf_tmp, EP_SIZE*TRANSFERS, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_in, rbuf_tmp, EP_SIZE*TRANSFERS, xfr_cb_in, &completed, TIMEOUT);
libusb_submit_transfer(transfer);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
else
fprintf(stderr, "success\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}
第二种方法:~755.9 MB/s (~6.047 Mb/s)
include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
/* Specify VENDOR_ID and PRODUCT_ID for device */
#define VENDOR_ID 0x0471
#define PRODUCT_ID 0x3630
/* Define number of bytes to transfer */
#define EP_SIZE 64 // bytes
#define TRANSFERS 1024*768*3/EP_SIZE // number of transfers
#define TIMEOUT 10*1000 // milliseconds
/* Use a global variable to keep the device handle */
static struct libusb_device_handle *handle = NULL;
/* count variables */
unsigned int count = 0;
unsigned int count_in = 0;
unsigned int count_out = 0;
/* The Endpoint addresses are hard-coded. You should use libusb -v to find
* the values corresponding to device
*/
static int ep_in = 0x82;
static int ep_out = 0x01;
/* Write and Read buffers */
unsigned char wbuf[EP_SIZE*TRANSFERS];
unsigned char *wbuf_tmp;
unsigned char rbuf[EP_SIZE*TRANSFERS];
unsigned char rbuf_tmp[EP_SIZE*TRANSFERS];
static void LIBUSB_CALL xfr_cb_out(struct libusb_transfer *transfer )
{
memcpy(wbuf+count_out*EP_SIZE, transfer->buffer, EP_SIZE);
count_out++; // one transfer complete
if (count_out < TRANSFERS)
{
transfer->buffer = ++wbuf_tmp;
libusb_submit_transfer(transfer);
}
}
static void LIBUSB_CALL xfr_cb_in(struct libusb_transfer *transfer )
{
int *completed = transfer->user_data;
memcpy(rbuf+count_in*EP_SIZE, transfer->buffer, EP_SIZE);
count_in++; // one transfer complete
if (count_in < TRANSFERS)
libusb_submit_transfer(transfer);
else
*completed = 1;
}
int main(int argc, char **argv)
{
const struct libusb_version *version;
int completed = 0;
size_t length = 64;
int n;
int rc;
/* Get libusb version */
version = libusb_get_version();
fprintf(stderr, "libusb version: %d.%d.%d.%d\n", version->major, version->minor, version->micro, version->nano);
/* Initialize libusb */
rc = libusb_init(NULL);
if (rc < 0)
{
fprintf(stderr, "Error Initializing libusb: %s\n", libusb_error_name(rc));
exit(1);
}
/* Set debugging output to max level */
libusb_set_debug(NULL, 3);
/* Look for a specific device and open it */
handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (!handle)
{
fprintf(stderr, "Error finding USB device\n");
goto out;
}
/* claim interface */
rc = libusb_claim_interface(handle, 0);
if (rc < 0)
{
fprintf(stderr, "Error claiming interface.\n");
goto out;
}
/* allocate memory */
wbuf_tmp = malloc(length*TRANSFERS);
/* fill the buffer with incrementing data */
for (n = 0; n < EP_SIZE*TRANSFERS; n++)
{
wbuf_tmp[n] = n;
}
struct libusb_transfer *transfer;
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_out, wbuf_tmp, EP_SIZE, xfr_cb_out, NULL, TIMEOUT);
libusb_submit_transfer(transfer);
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, handle, ep_in, rbuf_tmp, EP_SIZE, xfr_cb_in, &completed, TIMEOUT);
libusb_submit_transfer(transfer);
/* Handle Events */
while (!completed)
{
rc = libusb_handle_events_completed(NULL, &completed);
if (rc != LIBUSB_SUCCESS)
{
fprintf(stderr, "Transfer Error: %s\n", libusb_error_name(rc));
break;
}
}
fprintf(stderr, "completed\n");
int res;
res = memcmp(rbuf, wbuf, sizeof(wbuf));
if (res != 0)
fprintf(stderr, "miscompare\n");
else
fprintf(stderr, "success\n");
//* Release the interface */
libusb_release_interface(handle, 0);
/* Close the device handle */
if (handle)
libusb_close(handle);
out:
if (handle)
{
libusb_close(handle);
}
libusb_exit(NULL);
return rc;
}