从 16 个 1 位 ALU(结构代码)创建一个 16 位 ALU
Creating a 16-bit ALU from 16 1-bit ALUs (Structural code)
我已经创建了一个 1 位 ALU 的结构和行为代码,以及一个控制电路。控制电路决定将在两个变量之间进行的操作:a,b。
这是我的代码行为部分:
library ieee;
use ieee.std_logic_1164.all;
package erotima2 is
-- AND2 declaration
component myAND2
port (outnotA,outnotB: in std_logic; outAND: out std_logic);
end component;
-- OR2 declaration
component myOR2
port (outnotA,outnotB: in std_logic; outOR: out std_logic);
end component;
-- XOR2 declaration
component myXOR2
port (outnotA,outnotB: in std_logic; outXOR: out std_logic);
end component;
--fulladder declaration
component fulladder
port(CarryIn,outnotA,outnotB: in std_logic; sum,CarryOut: out std_logic);
end component;
--Ainvert declaration
component notA
port(a: in std_logic; signala: std_logic_vector(0 downto 0); outnotA: out std_logic);
end component;
--Binvert declaration
component notB
port(b: in std_logic; signalb: std_logic_vector(0 downto 0); outnotB: out std_logic);
end component;
--ControlCircuit declaration--
component ControlCircuit
port (
opcode : in std_logic_vector (2 downto 0);
signala,signalb : out std_logic_vector(0 downto 0);
operation : out std_logic_vector (1 downto 0);
CarryIn: out std_logic);
end component;
--mux4to1 declaration
component mux4to1
port(outAND, outOR, sum, outXOR: in std_logic; operation: in std_logic_vector(1 downto 0); Result: out std_logic);
end component;
end package erotima2;
--2 input AND gate
library ieee;
use ieee.std_logic_1164.all;
entity myAND2 is
port (outnotA,outnotB: in std_logic; outAND: out std_logic);
end myAND2;
architecture model_conc of myAND2 is
begin
outAND<= outnotA and outnotB;
end model_conc;
-- 2 input OR gate
library ieee;
use ieee.std_logic_1164.all;
entity myOR2 is
port (outnotA,outnotB: in std_logic; outOR: out std_logic);
end myOR2;
architecture model_conc2 of myOR2 is
begin
outOR <= outnotA or outnotB;
end model_conc2;
--2 input XOR gate
library ieee;
use ieee.std_logic_1164.all;
entity myXOR2 is
port(outnotA,outnotB: in std_logic; outXOR: out std_logic);
end myXOR2;
architecture model_conc3 of myXOR2 is
begin
outXOR <= outnotA xor outnotB;
end model_conc3;
--3 input full adder
library ieee;
use ieee.std_logic_1164.all;
entity fulladder is
port(CarryIn,outnotA,outnotB: in std_logic; sum,CarryOut: out std_logic);
end fulladder;
architecture model_conc4 of fulladder is
begin
CarryOut <= (outnotB and CarryIn) or (outnotA and CarryIn) or (outnotA and outnotB);
sum <= (outnotA and not outnotB and not CarryIn) or (not outnotA and outnotB and not CarryIn) or (not outnotA and not outnotB and CarryIn) or (outnotA and outnotB and CarryIn);
end model_conc4;
--1 input notA
library ieee;
use ieee.std_logic_1164.all;
entity notA is
port(a: in std_logic; signala:std_logic_vector(0 downto 0); outnotA: out std_logic);
end notA;
architecture model_conc6 of notA is
begin
with signala select
outnotA <= a when "0",
not a when others;
end model_conc6;
--1 input notB
library ieee;
use ieee.std_logic_1164.all;
entity notB is
port(b: in std_logic; signalb: std_logic_vector(0 downto 0); outnotB: out std_logic);
end notB;
architecture model_conc5 of notB is
begin
with signalb select
outnotB <= b when "0",
not b when others;
end model_conc5;
--4 input MUX
library ieee;
use ieee.std_logic_1164.all;
entity mux4to1 is
port(outAND, outOR, sum, outXOR: in std_logic; operation: in std_logic_vector(1 downto 0); Result: out std_logic);
end mux4to1;
architecture model_conc7 of mux4to1 is
begin
with operation select
Result<= outAND when "00",
outOR when "01",
sum when "10",
outXOR when OTHERS;
end model_conc7 ;
行为部分定义了与、或、异或的逻辑门,一个用于数值加法和减法的全加器。它还包含一个 4 对 1 多路复用器,用于选择(取决于 "operation" 变量的值)alu 将执行的操作。最后,有一个函数可以反转变量,以便更有效地使用我们的逻辑门(使用 DeMorgan 定理,因此我们不必创建 NOR 门)。控制单元根据变量 "opcode" 初始化变量输入,以及全加器的进位变量。 A board with every possible combination
接下来是代码的Control Circuit部分,它实现了之前的板子。
`
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity ControlCircuit is
port (
opcode :in std_logic_vector (2 downto 0);
signala, signalb : out std_logic_vector(0 downto 0);
operation : out std_logic_vector(1 downto 0);
CarryIn : out std_logic);
end ControlCircuit;
architecture model_conc9 of ControlCircuit is
--signal outAND,outOR,outXOR,sum,outnotA,outnotB : std_logic;
--signal operation : out std_logic_vector(1 downto 0);
begin
process(opcode)
begin
case opcode is
--AND--
when "000"=>
operation <= "00";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--OR--
when "001" =>
operation <= "01";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--ADD--
when "011" =>
operation <= "10";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--SUB--
when "010" =>
operation <= "10";
signala <= "0";
signalb <="1";
CarryIn <= '1';
--NOR--
when "101"=>
operation <= "00";
signala <= "1";
signalb <= "1";
CarryIn <= '0';
--xor
when "100" =>
operation <= "11";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--Adiafores times--
when others =>
operation <= "00";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
end case;
end process;
end model_conc9;
`
最后是使用前面所有部分的代码 and an RTL diagram that shows the code's result
library IEEE;
use ieee.std_logic_1164.all;
use work.erotima2.all;
entity structural is
port (a,b: in std_logic;
opcode : in std_logic_vector ( 2 downto 0);
Result,CarryOut : out std_logic);
end structural;
architecture alu of structural is
signal outAND,outOR,outXOR,sum,outnotA,outnotB,CarryIn : std_logic;
signal signala,signalb : std_logic_vector (0 downto 0);
signal operation : std_logic_vector (1 downto 0);
begin
u0 : myAND2 port map (outnotA,outnotB,outAND);
u1 : myOR2 port map (outnotA,outnotB,outOR);
u2 : myXOR2 port map (outnotA,outnotB,outXOR);
u3 : fulladder port map (CarryIn,outnotA,outnotB,sum,CarryOut);
u4 : notA port map (a,signala,outnotA);
u5 : notB port map (b,signalb,outnotB);
u6 : mux4to1 port map (outAND, outOR,sum, outXOR, operation, Result );
u8 : ControlCircuit port map(opcode,signala,signalb,operation,CarryIn);
end alu;
现在是困难的部分,我需要将1位ALU作为一个组件使用16次,以创建一个16位ALU。保持控制电路独立于代码的其余部分是很重要的。我试过使用 std_logic_vector(从 15 到 0),但它不起作用,我想将前面的代码段用作一个组件。谁能提供任何有助于将 16 个 1 位 ALU 连接到一个完整的 16 位 ALU 的提示或想法?提前感谢那些阅读了这么大篇幅文字的人。
您最近的评论
Yes i understand that my code is weird but we were intsructed to invert the inputs according to this diagram . As for the duplicate post, i checked before posting and they were implemented only structurally, while in my case i need to write the behavioral part too.
解释问题,拼写错误除外。您会注意到实体结构的体系结构与上面 1 位 alu 图上显示的信号不匹配,该图不包含实例化的 ControlCircuit。
如果您要提供与上图相匹配的设计单元,您可以连接 1 位 alu 进位链,同时从提供 +1 和减法反转的控制块导出 lsb 的进位:
library ieee;
use ieee.std_logic_1164.all;
entity alu_16_bit is
port (
a: in std_logic_vector (15 downto 0);
b: in std_logic_vector (15 downto 0);
opcode: in std_logic_vector (2 downto 0);
result: out std_logic_vector (15 downto 0);
carryout: out std_logic
);
end entity;
architecture foo of alu_16_bit is
component alu_1_bit is
port (
a: in std_logic;
b: in std_logic;
ainvert: in std_logic;
binvert: in std_logic;
carryin: in std_logic;
operation: in std_logic_vector (1 downto 0);
result: out std_logic;
carryout: out std_logic
);
end component;
component controlcircuit is
port (
opcode: in std_logic_vector(2 downto 0);
ainvert: out std_logic;
binvert: out std_logic;
operation: out std_logic_vector(1 downto 0);
carryin: out std_logic -- invert a or b, add + 1 for subtract
);
end component;
signal ainvert: std_logic;
signal binvert: std_logic;
signal operation: std_logic_vector (1 downto 0);
signal carry: std_logic_vector (16 downto 0);
begin
CONTROL_CIRCUIT:
controlcircuit
port map (
opcode => opcode,
ainvert => ainvert,
binvert => binvert,
operation => operation,
carryin => carry(0) -- for + 1 durring subtract
);
GEN_ALU:
for i in 0 to 15 generate
ALU:
alu_1_bit
port map (
a => a(i),
b => b(i),
ainvert => ainvert,
binvert => binvert,
carryin => carry(i),
operation => operation,
result => result(i),
carryout => carry(i + 1)
);
end generate;
carryout <= carry(16) when operation = "10" else '0';
end architecture;
这表示将 ControlCircuit 移出结构 - 只需要一个副本,重命名结构 alu_1_bit 并使端口匹配。
有一个新的顶层 alu_16_bit 包含一个 ControlCircuit 实例以及十六个 alu_1_bit 实例,这些实例是从使用生成参数 i
索引到数组值的生成语句中详细说明的用于连接。
此设计已使用您提供给 link 的操作码 table 在行为上独立实现:
以及在 alu_1_bit 中使用的独立全加器,并且看起来可以正常工作。
这意味着您的设计单位尚未经过验证。
我已经创建了一个 1 位 ALU 的结构和行为代码,以及一个控制电路。控制电路决定将在两个变量之间进行的操作:a,b。
这是我的代码行为部分:
library ieee;
use ieee.std_logic_1164.all;
package erotima2 is
-- AND2 declaration
component myAND2
port (outnotA,outnotB: in std_logic; outAND: out std_logic);
end component;
-- OR2 declaration
component myOR2
port (outnotA,outnotB: in std_logic; outOR: out std_logic);
end component;
-- XOR2 declaration
component myXOR2
port (outnotA,outnotB: in std_logic; outXOR: out std_logic);
end component;
--fulladder declaration
component fulladder
port(CarryIn,outnotA,outnotB: in std_logic; sum,CarryOut: out std_logic);
end component;
--Ainvert declaration
component notA
port(a: in std_logic; signala: std_logic_vector(0 downto 0); outnotA: out std_logic);
end component;
--Binvert declaration
component notB
port(b: in std_logic; signalb: std_logic_vector(0 downto 0); outnotB: out std_logic);
end component;
--ControlCircuit declaration--
component ControlCircuit
port (
opcode : in std_logic_vector (2 downto 0);
signala,signalb : out std_logic_vector(0 downto 0);
operation : out std_logic_vector (1 downto 0);
CarryIn: out std_logic);
end component;
--mux4to1 declaration
component mux4to1
port(outAND, outOR, sum, outXOR: in std_logic; operation: in std_logic_vector(1 downto 0); Result: out std_logic);
end component;
end package erotima2;
--2 input AND gate
library ieee;
use ieee.std_logic_1164.all;
entity myAND2 is
port (outnotA,outnotB: in std_logic; outAND: out std_logic);
end myAND2;
architecture model_conc of myAND2 is
begin
outAND<= outnotA and outnotB;
end model_conc;
-- 2 input OR gate
library ieee;
use ieee.std_logic_1164.all;
entity myOR2 is
port (outnotA,outnotB: in std_logic; outOR: out std_logic);
end myOR2;
architecture model_conc2 of myOR2 is
begin
outOR <= outnotA or outnotB;
end model_conc2;
--2 input XOR gate
library ieee;
use ieee.std_logic_1164.all;
entity myXOR2 is
port(outnotA,outnotB: in std_logic; outXOR: out std_logic);
end myXOR2;
architecture model_conc3 of myXOR2 is
begin
outXOR <= outnotA xor outnotB;
end model_conc3;
--3 input full adder
library ieee;
use ieee.std_logic_1164.all;
entity fulladder is
port(CarryIn,outnotA,outnotB: in std_logic; sum,CarryOut: out std_logic);
end fulladder;
architecture model_conc4 of fulladder is
begin
CarryOut <= (outnotB and CarryIn) or (outnotA and CarryIn) or (outnotA and outnotB);
sum <= (outnotA and not outnotB and not CarryIn) or (not outnotA and outnotB and not CarryIn) or (not outnotA and not outnotB and CarryIn) or (outnotA and outnotB and CarryIn);
end model_conc4;
--1 input notA
library ieee;
use ieee.std_logic_1164.all;
entity notA is
port(a: in std_logic; signala:std_logic_vector(0 downto 0); outnotA: out std_logic);
end notA;
architecture model_conc6 of notA is
begin
with signala select
outnotA <= a when "0",
not a when others;
end model_conc6;
--1 input notB
library ieee;
use ieee.std_logic_1164.all;
entity notB is
port(b: in std_logic; signalb: std_logic_vector(0 downto 0); outnotB: out std_logic);
end notB;
architecture model_conc5 of notB is
begin
with signalb select
outnotB <= b when "0",
not b when others;
end model_conc5;
--4 input MUX
library ieee;
use ieee.std_logic_1164.all;
entity mux4to1 is
port(outAND, outOR, sum, outXOR: in std_logic; operation: in std_logic_vector(1 downto 0); Result: out std_logic);
end mux4to1;
architecture model_conc7 of mux4to1 is
begin
with operation select
Result<= outAND when "00",
outOR when "01",
sum when "10",
outXOR when OTHERS;
end model_conc7 ;
行为部分定义了与、或、异或的逻辑门,一个用于数值加法和减法的全加器。它还包含一个 4 对 1 多路复用器,用于选择(取决于 "operation" 变量的值)alu 将执行的操作。最后,有一个函数可以反转变量,以便更有效地使用我们的逻辑门(使用 DeMorgan 定理,因此我们不必创建 NOR 门)。控制单元根据变量 "opcode" 初始化变量输入,以及全加器的进位变量。 A board with every possible combination 接下来是代码的Control Circuit部分,它实现了之前的板子。
`
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity ControlCircuit is
port (
opcode :in std_logic_vector (2 downto 0);
signala, signalb : out std_logic_vector(0 downto 0);
operation : out std_logic_vector(1 downto 0);
CarryIn : out std_logic);
end ControlCircuit;
architecture model_conc9 of ControlCircuit is
--signal outAND,outOR,outXOR,sum,outnotA,outnotB : std_logic;
--signal operation : out std_logic_vector(1 downto 0);
begin
process(opcode)
begin
case opcode is
--AND--
when "000"=>
operation <= "00";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--OR--
when "001" =>
operation <= "01";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--ADD--
when "011" =>
operation <= "10";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--SUB--
when "010" =>
operation <= "10";
signala <= "0";
signalb <="1";
CarryIn <= '1';
--NOR--
when "101"=>
operation <= "00";
signala <= "1";
signalb <= "1";
CarryIn <= '0';
--xor
when "100" =>
operation <= "11";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
--Adiafores times--
when others =>
operation <= "00";
signala <= "0";
signalb <= "0";
CarryIn <= '0';
end case;
end process;
end model_conc9;
`
最后是使用前面所有部分的代码 and an RTL diagram that shows the code's result
library IEEE;
use ieee.std_logic_1164.all;
use work.erotima2.all;
entity structural is
port (a,b: in std_logic;
opcode : in std_logic_vector ( 2 downto 0);
Result,CarryOut : out std_logic);
end structural;
architecture alu of structural is
signal outAND,outOR,outXOR,sum,outnotA,outnotB,CarryIn : std_logic;
signal signala,signalb : std_logic_vector (0 downto 0);
signal operation : std_logic_vector (1 downto 0);
begin
u0 : myAND2 port map (outnotA,outnotB,outAND);
u1 : myOR2 port map (outnotA,outnotB,outOR);
u2 : myXOR2 port map (outnotA,outnotB,outXOR);
u3 : fulladder port map (CarryIn,outnotA,outnotB,sum,CarryOut);
u4 : notA port map (a,signala,outnotA);
u5 : notB port map (b,signalb,outnotB);
u6 : mux4to1 port map (outAND, outOR,sum, outXOR, operation, Result );
u8 : ControlCircuit port map(opcode,signala,signalb,operation,CarryIn);
end alu;
现在是困难的部分,我需要将1位ALU作为一个组件使用16次,以创建一个16位ALU。保持控制电路独立于代码的其余部分是很重要的。我试过使用 std_logic_vector(从 15 到 0),但它不起作用,我想将前面的代码段用作一个组件。谁能提供任何有助于将 16 个 1 位 ALU 连接到一个完整的 16 位 ALU 的提示或想法?提前感谢那些阅读了这么大篇幅文字的人。
您最近的评论
Yes i understand that my code is weird but we were intsructed to invert the inputs according to this diagram . As for the duplicate post, i checked before posting and they were implemented only structurally, while in my case i need to write the behavioral part too.
解释问题,拼写错误除外。您会注意到实体结构的体系结构与上面 1 位 alu 图上显示的信号不匹配,该图不包含实例化的 ControlCircuit。
如果您要提供与上图相匹配的设计单元,您可以连接 1 位 alu 进位链,同时从提供 +1 和减法反转的控制块导出 lsb 的进位:
library ieee;
use ieee.std_logic_1164.all;
entity alu_16_bit is
port (
a: in std_logic_vector (15 downto 0);
b: in std_logic_vector (15 downto 0);
opcode: in std_logic_vector (2 downto 0);
result: out std_logic_vector (15 downto 0);
carryout: out std_logic
);
end entity;
architecture foo of alu_16_bit is
component alu_1_bit is
port (
a: in std_logic;
b: in std_logic;
ainvert: in std_logic;
binvert: in std_logic;
carryin: in std_logic;
operation: in std_logic_vector (1 downto 0);
result: out std_logic;
carryout: out std_logic
);
end component;
component controlcircuit is
port (
opcode: in std_logic_vector(2 downto 0);
ainvert: out std_logic;
binvert: out std_logic;
operation: out std_logic_vector(1 downto 0);
carryin: out std_logic -- invert a or b, add + 1 for subtract
);
end component;
signal ainvert: std_logic;
signal binvert: std_logic;
signal operation: std_logic_vector (1 downto 0);
signal carry: std_logic_vector (16 downto 0);
begin
CONTROL_CIRCUIT:
controlcircuit
port map (
opcode => opcode,
ainvert => ainvert,
binvert => binvert,
operation => operation,
carryin => carry(0) -- for + 1 durring subtract
);
GEN_ALU:
for i in 0 to 15 generate
ALU:
alu_1_bit
port map (
a => a(i),
b => b(i),
ainvert => ainvert,
binvert => binvert,
carryin => carry(i),
operation => operation,
result => result(i),
carryout => carry(i + 1)
);
end generate;
carryout <= carry(16) when operation = "10" else '0';
end architecture;
这表示将 ControlCircuit 移出结构 - 只需要一个副本,重命名结构 alu_1_bit 并使端口匹配。
有一个新的顶层 alu_16_bit 包含一个 ControlCircuit 实例以及十六个 alu_1_bit 实例,这些实例是从使用生成参数 i
索引到数组值的生成语句中详细说明的用于连接。
此设计已使用您提供给 link 的操作码 table 在行为上独立实现:
以及在 alu_1_bit 中使用的独立全加器,并且看起来可以正常工作。
这意味着您的设计单位尚未经过验证。