Asterisk AGI 仅在控制台模式下运行

Question

我正在尝试运行一个 python 脚本，方法是在星号 AGI 接口中调用它。我在测试环境中有此运行ning，但似乎无法在 Ubuntu 18.04 上将其设置为运行。当我用 "sudo asterisk -vvgc"

开始星号时，我可以将 AGI 脚本设置为运行

我有下面的一些脚本，看看日志记录是否有问题，这就是脚本在控制台视图中打印时终止的原因。

这是 AGI 调试，而星号运行s 在后台通过 "sudo asterisk -vvvvvvr"

访问控制台

AGI Debugging Enabled
  == Using SIP RTP CoS mark 5
       > 0x7f9288015b20 -- Strict RTP learning after remote address set to: 
192.168.21.93:58654
-- Executing [101@default:1] NoOp("SIP/1400-00000001", "Test User") in new 
stack
-- Executing [101@default:2] AGI("SIP/1400-00000001", "siptapeth.agi") in new 
stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/siptapeth.agi
<SIP/1400-00000001>AGI Tx >> agi_request: siptapeth.agi
<SIP/1400-00000001>AGI Tx >> agi_channel: SIP/1400-00000001
<SIP/1400-00000001>AGI Tx >> agi_language: en
<SIP/1400-00000001>AGI Tx >> agi_type: SIP
<SIP/1400-00000001>AGI Tx >> agi_uniqueid: 1531757391.1
<SIP/1400-00000001>AGI Tx >> agi_version: 14.7.7
<SIP/1400-00000001>AGI Tx >> agi_callerid: 1400
<SIP/1400-00000001>AGI Tx >> agi_calleridname: Test User
<SIP/1400-00000001>AGI Tx >> agi_callingpres: 0
<SIP/1400-00000001>AGI Tx >> agi_callingani2: 0
<SIP/1400-00000001>AGI Tx >> agi_callington: 0
<SIP/1400-00000001>AGI Tx >> agi_callingtns: 0
<SIP/1400-00000001>AGI Tx >> agi_dnid: 101
<SIP/1400-00000001>AGI Tx >> agi_rdnis: unknown
<SIP/1400-00000001>AGI Tx >> agi_context: default
<SIP/1400-00000001>AGI Tx >> agi_extension: 101
<SIP/1400-00000001>AGI Tx >> agi_priority: 2
<SIP/1400-00000001>AGI Tx >> agi_enhanced: 0.0
<SIP/1400-00000001>AGI Tx >> agi_accountcode: 
<SIP/1400-00000001>AGI Tx >> agi_threadid: 140270109501184
<SIP/1400-00000001>AGI Tx >> 
-- <SIP/1400-00000001>AGI Script siptapeth.agi completed, returning 0
-- Auto fallthrough, channel 'SIP/1400-00000001' status is 'UNKNOWN'

这是我在控制台模式运行星号 "sudo asterisk -vvgc"

时的输出

`*CLI> core set verbose 10
Console verbose was 2 and is now 10.
*CLI> agi set debug on
AGI Debugging Enabled
*CLI> agi set debug 10
Usage: agi set debug [on|off]
   Enables/disables dumping of AGI transactions for
   debugging purposes.
*CLI>   == Using SIP RTP CoS mark 5
   > 0x7ff3ac0091e0 -- Strict RTP learning after remote address set to: 
192.168.21.93:59514
-- Executing [101@default:1] NoOp("SIP/1400-00000000", "Test User") in new 
stack
-- Executing [101@default:2] AGI("SIP/1400-00000000", "siptapeth.agi") in new 
stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/siptapeth.agi
<SIP/1400-00000000>AGI Tx >> agi_request: siptapeth.agi
<SIP/1400-00000000>AGI Tx >> agi_channel: SIP/1400-00000000
<SIP/1400-00000000>AGI Tx >> agi_language: en
<SIP/1400-00000000>AGI Tx >> agi_type: SIP
<SIP/1400-00000000>AGI Tx >> agi_uniqueid: 1531758059.0
<SIP/1400-00000000>AGI Tx >> agi_version: 14.7.7
<SIP/1400-00000000>AGI Tx >> agi_callerid: 1400
<SIP/1400-00000000>AGI Tx >> agi_calleridname: Test User
<SIP/1400-00000000>AGI Tx >> agi_callingpres: 0
<SIP/1400-00000000>AGI Tx >> agi_callingani2: 0
<SIP/1400-00000000>AGI Tx >> agi_callington: 0
<SIP/1400-00000000>AGI Tx >> agi_callingtns: 0
<SIP/1400-00000000>AGI Tx >> agi_dnid: 101
<SIP/1400-00000000>AGI Tx >> agi_rdnis: unknown
<SIP/1400-00000000>AGI Tx >> agi_context: default
<SIP/1400-00000000>AGI Tx >> agi_extension: 101
<SIP/1400-00000000>AGI Tx >> agi_priority: 2
<SIP/1400-00000000>AGI Tx >> agi_enhanced: 0.0
<SIP/1400-00000000>AGI Tx >> agi_accountcode: 
<SIP/1400-00000000>AGI Tx >> agi_threadid: 140687325234944
<SIP/1400-00000000>AGI Tx >> 
ARGS: ['/var/lib/asterisk/agi-bin/siptapeth.agi']
ENV LINE: agi_request: siptapeth.agi
ENV LINE: agi_channel: SIP/1400-00000000
ENV LINE: agi_language: en
ENV LINE: agi_type: SIP
ENV LINE: agi_uniqueid: 1531758059.0
ENV LINE: agi_version: 14.7.7
ENV LINE: agi_callerid: 1400
ENV LINE: agi_calleridname: Test User
ENV LINE: agi_callingpres: 0
ENV LINE: agi_callingani2: 0
ENV LINE: agi_callington: 0
ENV LINE: agi_callingtns: 0
ENV LINE: agi_dnid: 101
ENV LINE: agi_rdnis: unknown
ENV LINE: agi_context: default
ENV LINE: agi_extension: 101
ENV LINE: agi_priority: 2
ENV LINE: agi_enhanced: 0.0
ENV LINE: agi_accountcode:
ENV LINE: agi_threadid: 140687325234944
ENV LINE: 
class AGI: self.env = {'agi_accountcode': '',
 'agi_callerid': '1400',
 'agi_calleridname': 'Test User',
 'agi_callingani2': '0',
 'agi_callingpres': '0',
 'agi_callingtns': '0',
 'agi_callington': '0',
 'agi_channel': 'SIP/1400-00000000',
 'agi_context': 'default',
 'agi_dnid': '101',
 'agi_enhanced': '0.0',
 'agi_extension': '101',
 'agi_language': 'en',
 'agi_priority': '2',
 'agi_rdnis': 'unknown',
 'agi_request': 'siptapeth.agi',
 'agi_threadid': '140687325234944',
 'agi_type': 'SIP',
 'agi_uniqueid': '1531758059.0',
 'agi_version': '14.7.7'}
INFO:axi:---Pin:101 - Message:Test User - checksum:410
INFO:axi:b'211 Message sent.&ltCR&gt&ltACK&gt&ltCR&gt'
INFO:axi:---Page Accepted - checksum:410
-- <SIP/1400-00000000>AGI Script siptapeth.agi completed, returning 0
-- Auto fallthrough, channel 'SIP/1400-00000000' status is 'UNKNOWN'`

siptapeth.agi 的片段，其中一些已被删除。

#!/usr/bin/python3

import serial
import re
from time import sleep
import logging
import logging.handlers
from configparser import ConfigParser
import sys
import asterisk
import asterisk.agi
from asterisk.agi import *
import socket
import os
import sys

config = ConfigParser()
config.read('/var/www/html/config.ini')
LOG_LEVEL = logging.info('LOGGING', 'level')

# Initialize logging
LOGGER = logging.getLogger('axi')
LOGGER.setLevel(logging.INFO)
formatter = logging.Formatter('|%(asctime)s|%(levelname)-8s|%(name)s|%        (message)s')
log_file = logging.handlers.TimedRotatingFileHandler('/var/log/axi/input.csv',     when='midnight', backupCount=7)
log_file.setLevel(logging.INFO)
log_file.setFormatter(formatter)
LOGGER.addHandler(log_file)

# Only print to console if at DEBUG level
if LOG_LEVEL == 'DEBUG':
log_console = logging.StreamHandler()
log_console.setLevel(logging.INFO)
log_console.formatter(formatter)
LOGGER.addHandler(log_console)

BAUD = config.get('USB_Settings', 'baudrate')
PTY = config.get('USB_Settings', 'parity')
STPB = int(config.get('USB_Settings', 'stopbits'))
BTSZ = int(config.get('USB_Settings', 'bytesize'))

HOST = config.get('Ethernet_Paging_System', 'IP')
PORT = config.get('Ethernet_Paging_System', 'Port')

agi = AGI()

pin = agi.env['agi_extension']
msg = agi.env['agi_calleridname']

#***SOME CODE REMOVED FOR SECURITY REASONS***

    #Socket setup
    s = None
    for res in socket.getaddrinfo(HOST, PORT, socket.AF_INET, socket.SOCK_STREAM):
    af, socktype, proto, canonname, sa = res
    try:
        s = socket.socket(af, socktype, proto)
    except OSError as msg:
        s = None
        continue
    try:
        s.connect(sa)
    except OSError as msg:
        s.close()
        s = None
        continue
    break
if s is None:
    LOGGER.info('---Could not open socket')
    sys.exit(1)

#***SOME CODE REMOVED FOR SECURITY REASONS***

Answer 1

看起来这是一个路径问题。我也以 root 身份安装了 pyst2，现在它可以工作了。

Answer 2

通常您会检查所有包和配置文件是否可供 asterisk 用户或您运行 asterisk 的其他用户使用。

Answer 3

您可以尝试为asterisk 用户更改自己的agi-script。查看 'chmod' 和 'chown' 命令。

Asterisk AGI 仅在控制台模式下运行

Asterisk AGI runs in console mode only

asterisk

agi

python-3.x