java 服务器上的 readInt() 没有得到好的 int
java readInt() on server doesn't get the good int
我正在实施一个 "little" client/server 应用程序,就像一个 Cloud。
问题是:我是 Java 的新手。
所以我学得有点快,client/server 通信、数据库、框架、线程也是如此。
我很确定我的代码不会是最好的,但事实是:我必须使用 Java,而且我必须快速完成。我不会尝试优化它,我只需要它工作。
我已经实现了很多,所以我不会在这里给出所有代码,只是解释一下我的问题之前发生了什么:
客户端的主编打开一个登录框架。客户可以注册或登录。注册运行良好,假设他登录了。如果身份验证有效,则会打开另一个框架,其中包含 "browse" 和 "upload" 选项。这个想法是,他浏览一个文件然后上传它。当他点击上传时,它应该调用上传函数,该函数将一个 byte[2] 数组和一个 DataOutputStream 对象一起发送到服务器。 (它首先发送数组的大小,然后发送数组)
在服务器端,当身份验证有效时,它会将客户端套接字提供给 "Cloud" class,它 - 到现在 - 只是应该接收一个字节数组(它'稍后我会做更多,但现在我无法获得这个字节数组)
但是服务器收到的大小是 1970302063 而不是 2。我已经检查了客户端大小 writeInt
之前的大小,它是 2。在服务器端的 readInt
之后,它是1970302063.
我不明白。服务器可以在某处接收其他东西,而我漂亮的 2 丢失在缓冲区中吗?
服务器端:
public class Server {
public static void main(String[] zero) throws IOException {
ServerSocket serverSocket ;
Socket clientSocket ;
int tmp = 0; //when everything works, tmp will disappear
DataBase DB = new DataBase();
System.out.println("ouverture du server");
serverSocket = new ServerSocket(2017);
while(tmp<1) { //limit the number of connections allowed.
try {
clientSocket = serverSocket.accept();
Thread t = new Thread(new Connect(clientSocket, DB));
t.start();
//clients.printAll(); //just to see the DB.
}catch (IOException e) {
e.printStackTrace();
}
tmp++;
}
serverSocket.close();
}
}
如您所见,我只授权了 1 个连接,因为我仍在测试它并且我不想每次遇到错误/更改某些内容时都更改端口号。有了它,我只需要在每次测试后重新启动服务器。
public class Connect implements Runnable{
private DataBase DB;
private Socket clientSocket;
public Connect(Socket socket, DataBase DB) {
this.clientSocket = socket;
this.DB = DB;
}
public void run() {
try {
BufferedReader in;
PrintWriter out;
in = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
out = new PrintWriter(clientSocket.getOutputStream());
String mode = in.readLine();
String clientID = in.readLine();
String clientPwd = in.readLine();
if (mode.equals("auth")) {
Authentification auth = new Authentification (clientID, clientPwd, DB);
out.write(auth.getMessage()+"\r\n");
out.flush();
if (auth.getMessage().equals("Login Successfull. Welcome in SecureCloud!"))
new Cloud(clientSocket, DB); //launch Cloud.
}
else if (mode.equals("reg")) {
Registration reg= new Registration(clientID, clientPwd, DB);
out.write(reg.getMessage()+"\r\n");
out.flush();
}
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
try {
this.clientSocket.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}
现在,这里:身份验证和注册将建立连接,最后关闭客户端套接字。但是,如果身份验证成功,则会创建一个新的云:
public class Cloud {
public Cloud(Socket clientSocket, DataBase DB) {
try {
DataInputStream dIn = new DataInputStream(clientSocket.getInputStream());
int length = dIn.readInt(); // read length of incoming message
System.out.println("byte array size: "+length);
byte[] shorthash;
if(length!=2) {
System.err.println("Incorrect size for shorthash!");
}
else {
shorthash = new byte[length];
dIn.readFully(shorthash, 0, shorthash.length); // read the message
System.out.println(shorthash);
}
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}
如您所见,目前它的作用不大。我知道我必须添加一个 while(true) 循环以便客户端可以上传更多文件,但现在如果我可以只发送这个字节数组我会很高兴。
现在,客户端。我将跳过 main,它只是打开登录框架。我还将跳过大部分登录框架,它只是一个框架...这是客户端单击 "login" 时发生的情况:
public void actionPerformed(ActionEvent e)
{
if (e.getSource()==connectButton) {
Connection con = new Connection();
con.auth(username.getText(), password.getText());
if(con.getServerAnswer().equals("Login Successfull. Welcome in SecureCloud!")) {
this.setVisible(false);
con.setConnection(true);
con.setUsername(username.getText());
new Load_Frame(con.getUsername(),con.getSocket());
}
else System.out.println("erreur: " + con.getServerAnswer());
}
else if (e.getSource()==registerButton) {
this.setVisible(false);
new Registration_Frame();
}
}
因此,它会创建连接并使用用户名和密码启动身份验证过程 (con.auth)。如果成功,它将使用用于此连接的用户名和套接字打开负载框架。
我将再次跳过 Load Frame 的大部分内容,这里是操作:
public void actionPerformed(ActionEvent e)
{
if (e.getSource()== uploadButton) {
this.filename = uploadField.getText();
File file = new File(filename);
//TODO: change the upload function:
try {
client.upload(file);
} catch (NoSuchAlgorithmException | NoSuchPaddingException | IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
}
else if (e.getSource()== downloadButton) {
this.filename = downloadField.getText();
//TODO: change the download function
//download(filename);
}
else if (e.getSource()== browseButton) {
JFileChooser jc = new JFileChooser();
if(jc.showOpenDialog(this) != 1)
uploadField.setText(jc.getSelectedFile().getAbsolutePath());
}
}
最后但同样重要的是,"upload" 函数,由 client.upload(file)
:
调用
public void upload(File originalFile) throws NoSuchAlgorithmException, NoSuchPaddingException, IOException {
//create the "FileData" object, which make the shorthash of the file.
FileData myfile = new FileData(originalFile, fileID);
//say to the server that we want to upload:
PrintWriter mode;
mode = new PrintWriter(socket.getOutputStream());
mode.println("upload");
mode.flush();
//Send shorthash to the server:
DataOutputStream out = new DataOutputStream(socket.getOutputStream());
DataInputStream in = new DataInputStream(new BufferedInputStream(socket.getInputStream()));
System.out.println("byte array size: "+myfile.shortHash.length);
out.writeInt(myfile.shortHash.length); // send the length of the byte array
//out.flush();
out.write(myfile.shortHash); //send the array
}
我试过使用和不使用 out.flush()
,都没有任何区别。
综上所述,这是我得到的答案:
来自客户:
Asking for authentification...
Login Successfull. Welcome in SecureCloud!
No file uploaded
byte array size: 2
来自服务器:
Connection to SQLite has been established.
ouverture du server
byte array size: 1970302063
Incorrect size for shorthash!
当然,因为我知道字节数组的大小,我可以很容易地告诉服务器"hey, the size is 2!"(我的意思是,直接用新字节[2]初始化我的数组)
但我想了解这里发生了什么。另外,如果我没有收到合适的尺寸,也许我不会收到好的阵列。
所以,感谢那些真正快速发现问题的人:)
这有点愚蠢,即使你重读你的代码 5 次你也看不到这种问题,但是其他人读了它他会在一分钟内看到它。
解决方法是在上传功能中删除这部分:
//say to the server that we want to upload:
PrintWriter mode;
mode = new PrintWriter(socket.getOutputStream());
mode.println("upload");
mode.flush();
在我更改服务器端的代码之前它很有用,现在它很烦人^^
我正在实施一个 "little" client/server 应用程序,就像一个 Cloud。 问题是:我是 Java 的新手。 所以我学得有点快,client/server 通信、数据库、框架、线程也是如此。
我很确定我的代码不会是最好的,但事实是:我必须使用 Java,而且我必须快速完成。我不会尝试优化它,我只需要它工作。
我已经实现了很多,所以我不会在这里给出所有代码,只是解释一下我的问题之前发生了什么: 客户端的主编打开一个登录框架。客户可以注册或登录。注册运行良好,假设他登录了。如果身份验证有效,则会打开另一个框架,其中包含 "browse" 和 "upload" 选项。这个想法是,他浏览一个文件然后上传它。当他点击上传时,它应该调用上传函数,该函数将一个 byte[2] 数组和一个 DataOutputStream 对象一起发送到服务器。 (它首先发送数组的大小,然后发送数组)
在服务器端,当身份验证有效时,它会将客户端套接字提供给 "Cloud" class,它 - 到现在 - 只是应该接收一个字节数组(它'稍后我会做更多,但现在我无法获得这个字节数组)
但是服务器收到的大小是 1970302063 而不是 2。我已经检查了客户端大小 writeInt
之前的大小,它是 2。在服务器端的 readInt
之后,它是1970302063.
我不明白。服务器可以在某处接收其他东西,而我漂亮的 2 丢失在缓冲区中吗?
服务器端:
public class Server {
public static void main(String[] zero) throws IOException {
ServerSocket serverSocket ;
Socket clientSocket ;
int tmp = 0; //when everything works, tmp will disappear
DataBase DB = new DataBase();
System.out.println("ouverture du server");
serverSocket = new ServerSocket(2017);
while(tmp<1) { //limit the number of connections allowed.
try {
clientSocket = serverSocket.accept();
Thread t = new Thread(new Connect(clientSocket, DB));
t.start();
//clients.printAll(); //just to see the DB.
}catch (IOException e) {
e.printStackTrace();
}
tmp++;
}
serverSocket.close();
}
}
如您所见,我只授权了 1 个连接,因为我仍在测试它并且我不想每次遇到错误/更改某些内容时都更改端口号。有了它,我只需要在每次测试后重新启动服务器。
public class Connect implements Runnable{
private DataBase DB;
private Socket clientSocket;
public Connect(Socket socket, DataBase DB) {
this.clientSocket = socket;
this.DB = DB;
}
public void run() {
try {
BufferedReader in;
PrintWriter out;
in = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
out = new PrintWriter(clientSocket.getOutputStream());
String mode = in.readLine();
String clientID = in.readLine();
String clientPwd = in.readLine();
if (mode.equals("auth")) {
Authentification auth = new Authentification (clientID, clientPwd, DB);
out.write(auth.getMessage()+"\r\n");
out.flush();
if (auth.getMessage().equals("Login Successfull. Welcome in SecureCloud!"))
new Cloud(clientSocket, DB); //launch Cloud.
}
else if (mode.equals("reg")) {
Registration reg= new Registration(clientID, clientPwd, DB);
out.write(reg.getMessage()+"\r\n");
out.flush();
}
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
try {
this.clientSocket.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}
现在,这里:身份验证和注册将建立连接,最后关闭客户端套接字。但是,如果身份验证成功,则会创建一个新的云:
public class Cloud {
public Cloud(Socket clientSocket, DataBase DB) {
try {
DataInputStream dIn = new DataInputStream(clientSocket.getInputStream());
int length = dIn.readInt(); // read length of incoming message
System.out.println("byte array size: "+length);
byte[] shorthash;
if(length!=2) {
System.err.println("Incorrect size for shorthash!");
}
else {
shorthash = new byte[length];
dIn.readFully(shorthash, 0, shorthash.length); // read the message
System.out.println(shorthash);
}
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
}
如您所见,目前它的作用不大。我知道我必须添加一个 while(true) 循环以便客户端可以上传更多文件,但现在如果我可以只发送这个字节数组我会很高兴。
现在,客户端。我将跳过 main,它只是打开登录框架。我还将跳过大部分登录框架,它只是一个框架...这是客户端单击 "login" 时发生的情况:
public void actionPerformed(ActionEvent e)
{
if (e.getSource()==connectButton) {
Connection con = new Connection();
con.auth(username.getText(), password.getText());
if(con.getServerAnswer().equals("Login Successfull. Welcome in SecureCloud!")) {
this.setVisible(false);
con.setConnection(true);
con.setUsername(username.getText());
new Load_Frame(con.getUsername(),con.getSocket());
}
else System.out.println("erreur: " + con.getServerAnswer());
}
else if (e.getSource()==registerButton) {
this.setVisible(false);
new Registration_Frame();
}
}
因此,它会创建连接并使用用户名和密码启动身份验证过程 (con.auth)。如果成功,它将使用用于此连接的用户名和套接字打开负载框架。 我将再次跳过 Load Frame 的大部分内容,这里是操作:
public void actionPerformed(ActionEvent e)
{
if (e.getSource()== uploadButton) {
this.filename = uploadField.getText();
File file = new File(filename);
//TODO: change the upload function:
try {
client.upload(file);
} catch (NoSuchAlgorithmException | NoSuchPaddingException | IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
}
else if (e.getSource()== downloadButton) {
this.filename = downloadField.getText();
//TODO: change the download function
//download(filename);
}
else if (e.getSource()== browseButton) {
JFileChooser jc = new JFileChooser();
if(jc.showOpenDialog(this) != 1)
uploadField.setText(jc.getSelectedFile().getAbsolutePath());
}
}
最后但同样重要的是,"upload" 函数,由 client.upload(file)
:
public void upload(File originalFile) throws NoSuchAlgorithmException, NoSuchPaddingException, IOException {
//create the "FileData" object, which make the shorthash of the file.
FileData myfile = new FileData(originalFile, fileID);
//say to the server that we want to upload:
PrintWriter mode;
mode = new PrintWriter(socket.getOutputStream());
mode.println("upload");
mode.flush();
//Send shorthash to the server:
DataOutputStream out = new DataOutputStream(socket.getOutputStream());
DataInputStream in = new DataInputStream(new BufferedInputStream(socket.getInputStream()));
System.out.println("byte array size: "+myfile.shortHash.length);
out.writeInt(myfile.shortHash.length); // send the length of the byte array
//out.flush();
out.write(myfile.shortHash); //send the array
}
我试过使用和不使用 out.flush()
,都没有任何区别。
综上所述,这是我得到的答案: 来自客户:
Asking for authentification...
Login Successfull. Welcome in SecureCloud!
No file uploaded
byte array size: 2
来自服务器:
Connection to SQLite has been established.
ouverture du server
byte array size: 1970302063
Incorrect size for shorthash!
当然,因为我知道字节数组的大小,我可以很容易地告诉服务器"hey, the size is 2!"(我的意思是,直接用新字节[2]初始化我的数组) 但我想了解这里发生了什么。另外,如果我没有收到合适的尺寸,也许我不会收到好的阵列。
所以,感谢那些真正快速发现问题的人:) 这有点愚蠢,即使你重读你的代码 5 次你也看不到这种问题,但是其他人读了它他会在一分钟内看到它。
解决方法是在上传功能中删除这部分:
//say to the server that we want to upload:
PrintWriter mode;
mode = new PrintWriter(socket.getOutputStream());
mode.println("upload");
mode.flush();
在我更改服务器端的代码之前它很有用,现在它很烦人^^