使用 ClickOnce 在 GitHub 上部署 Install/Updates 问题
Issue Deploying Install/Updates On GitHub with ClickOnce
我一直在努力找出使用 ClickOnce 部署 WPF 应用程序的最佳方法。我会从 GitHub URL 下载安装文件，然后祈祷，然后 运行 每次都这样：
PLATFORM VERSION INFO
Windows : 10.0.15063.0 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.7.2046.0 built by: NET47REL1
clr.dll : 4.7.3130.0 built by: NET472REL1LAST_B
dfdll.dll : 4.7.2046.0 built by: NET47REL1
dfshim.dll : 10.0.15063.0 (WinBuild.160101.0800)
SOURCES
Deployment url : https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application resulted in exception. Following failure messages were detected:
+ Exception reading manifest from https://github.com/SuperScrub837/blob/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application: the manifest may not be valid or the file could not be opened.
+ DTD is prohibited in this XML document.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/14/2018 8:21:48 PM] : Activation of https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/14/2018 8:21:50 PM] System.Deployment.Application.InvalidDeploymentException (ManifestParse)
- Exception reading manifest from https://github.com/SuperScrub837/blob/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl, Uri& deploymentUri)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Xml.XmlException
- DTD is prohibited in this XML document.
- Source: System.Xml
- Stack trace:
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.ParseDoctypeDecl()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Deployment.Application.ManifestValidatingReader.XmlFilteredReader.Read()
at System.Xml.XsdValidatingReader.Read()
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
我一直在尝试关注我发现的一些博客，并在 .gitignore 中创建了以下内容：
## Ignore Visual Studio temporary files, build results, and
## files generated by popular Visual Studio add-ons.
##
## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
#Allow publish directory
!publish/
# User-specific files
*.suo
*.user
*.userosscache
*.sln.docstates
# User-specific files (MonoDevelop/Xamarin Studio)
*.userprefs
# Build results
[Dd]ebug/
[Dd]ebugPublic/
[Rr]elease/
[Rr]eleases/
x64/
x86/
bld/
[Bb]in/
[Oo]bj/
[Ll]og/
# Visual Studio 2015 cache/options directory
.vs/
# Uncomment if you have tasks that create the project's static files in wwwroot
#wwwroot/
# MSTest test Results
[Tt]est[Rr]esult*/
[Bb]uild[Ll]og.*
# NUNIT
*.VisualState.xml
TestResult.xml
# Build Results of an ATL Project
[Dd]ebugPS/
[Rr]eleasePS/
dlldata.c
# .NET Core
project.lock.json
project.fragment.lock.json
artifacts/
**/Properties/launchSettings.json
*_i.c
*_p.c
*_i.h
*.ilk
*.meta
*.obj
*.pch
*.pdb
*.pgc
*.pgd
*.rsp
*.sbr
*.tlb
*.tli
*.tlh
*.tmp
*.tmp_proj
*.log
*.vspscc
*.vssscc
.builds
*.pidb
*.svclog
*.scc
# Chutzpah Test files
_Chutzpah*
# Visual C++ cache files
ipch/
*.aps
*.ncb
*.opendb
*.opensdf
*.sdf
*.cachefile
*.VC.db
*.VC.VC.opendb
# Visual Studio profiler
*.psess
*.vsp
*.vspx
*.sap
# TFS 2012 Local Workspace
$tf/
# Guidance Automation Toolkit
*.gpState
# ReSharper is a .NET coding add-in
_ReSharper*/
*.[Rr]e[Ss]harper
*.DotSettings.user
# JustCode is a .NET coding add-in
.JustCode
# TeamCity is a build add-in
_TeamCity*
# DotCover is a Code Coverage Tool
*.dotCover
# Visual Studio code coverage results
*.coverage
*.coveragexml
# NCrunch
_NCrunch_*
.*crunch*.local.xml
nCrunchTemp_*
# MightyMoose
*.mm.*
AutoTest.Net/
# Web workbench (sass)
.sass-cache/
# Installshield output folder
[Ee]xpress/
# DocProject is a documentation generator add-in
DocProject/buildhelp/
DocProject/Help/*.HxT
DocProject/Help/*.HxC
DocProject/Help/*.hhc
DocProject/Help/*.hhk
DocProject/Help/*.hhp
DocProject/Help/Html2
DocProject/Help/html
# Click-Once directory
publish/
# Publish Web Output
*.[Pp]ublish.xml
*.azurePubxml
# TODO: Comment the next line if you want to checkin your web deploy settings
# but database connection strings (with potential passwords) will be unencrypted
*.pubxml
*.publishproj
# Microsoft Azure Web App publish settings. Comment the next line if you want to
# checkin your Azure Web App publish settings, but sensitive information contained
# in these scripts will be unencrypted
PublishScripts/
# NuGet Packages
*.nupkg
# The packages folder can be ignored because of Package Restore
**/packages/*
# except build/, which is used as an MSBuild target.
!**/packages/build/
# Uncomment if necessary however generally it will be regenerated when needed
#!**/packages/repositories.config
# NuGet v3's project.json files produces more ignorable files
*.nuget.props
*.nuget.targets
# Microsoft Azure Build Output
csx/
*.build.csdef
# Microsoft Azure Emulator
ecf/
rcf/
# Windows Store app package directories and files
AppPackages/
BundleArtifacts/
Package.StoreAssociation.xml
_pkginfo.txt
# Visual Studio cache files
# files ending in .cache can be ignored
*.[Cc]ache
# but keep track of directories ending in .cache
!*.[Cc]ache/
# Others
ClientBin/
~$*
*~
*.dbmdl
*.dbproj.schemaview
*.jfm
*.pfx
*.publishsettings
orleans.codegen.cs
# Since there are multiple workflows, uncomment next line to ignore bower_components
# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
#bower_components/
# RIA/Silverlight projects
Generated_Code/
# Backup & report files from converting an old project file
# to a newer Visual Studio version. Backup files are not needed,
# because we have git ;-)
_UpgradeReport_Files/
Backup*/
UpgradeLog*.XML
UpgradeLog*.htm
# SQL Server files
*.mdf
*.ldf
*.ndf
# Business Intelligence projects
*.rdl.data
*.bim.layout
*.bim_*.settings
# Microsoft Fakes
FakesAssemblies/
# GhostDoc plugin setting file
*.GhostDoc.xml
# Node.js Tools for Visual Studio
.ntvs_analysis.dat
node_modules/
# Typescript v1 declaration files
typings/
# Visual Studio 6 build log
*.plg
# Visual Studio 6 workspace options file
*.opt
# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
*.vbw
# Visual Studio LightSwitch build output
**/*.HTMLClient/GeneratedArtifacts
**/*.DesktopClient/GeneratedArtifacts
**/*.DesktopClient/ModelManifest.xml
**/*.Server/GeneratedArtifacts
**/*.Server/ModelManifest.xml
_Pvt_Extensions
# Paket dependency manager
.paket/paket.exe
paket-files/
# FAKE - F# Make
.fake/
# JetBrains Rider
.idea/
*.sln.iml
# CodeRush
.cr/
# Python Tools for Visual Studio (PTVS)
__pycache__/
*.pyc
# Cake - Uncomment if you are using it
# tools/**
# !tools/packages.config
# Telerik's JustMock configuration file
*.jmconfig
# BizTalk build output
*.btp.cs
*.btm.cs
*.odx.cs
*.xsd.cs
这是我的 .gitattributes 文件中的代码：
*.manifest binary
*.application binary
*.deploy binary
事实证明，这对我来说比我应该做的更痛苦。我希望用户能够从 GitHub link 安装并更新应用程序。
想法？
因此，在 GitHub 上发布我的 ClickOnce 可执行文件的目的是允许在我的软件更新时从该存储库下载更新。正如本网站上的许多人所知，GitHub 不鼓励下载原始文件，因为他们通常希望自己成为代码本身的存储库系统 - 他们不希望下载时间过长等。
请记住，至少目前我一直在构建的这个应用程序是轻量级的，所以由于我目前没有可用资源的替代方案，我决定保留这些更新的可执行文件在回购协议本身。如果有人想这样做，这里有一个提示，您以前可能已经看过 - 尝试使用以下 URL:
https://github.com/SuperScrub837/raw/master/SuperScrub837/SuperScrub837/publish/
而不是：
https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/
在项目的 ClickOnce 首选项中。
当我使用 link 的原始版本时，另一个应用程序上部署的应用程序成功更新，没有任何错误。希望这会有所帮助并且不会太过分 - 另外，这篇文章可能属于 ServerFault 之类的，所以我很抱歉，因为我在这里提出了这个问题。
错误存在是因为您没有使用原始 GitHub 进行文件托管。 Raw GitHub 本质上就像一个免费的 FTP 服务器，您可以使用它来免费托管您的 .NET 应用程序。
按照以下步骤操作：
（我还在此处创建了一个说明性视频：https://youtu.be/iMEGtrjMXPU）
- 如果您的项目不在 GitHub 上，请创建一个存储库并将您的代码推送到那里。必须是 public.
- 在您的计算机上，在存储库的根目录下创建一个名为 'published' 的文件夹。确保在 .gitignore
中没有忽略此文件夹
- 在此 /published 文件夹中创建一个名为 .gitattributes 的文件。添加以下内容
*.manifest binary
*.application binary
*.deploy binary
* -text
- 现在提交并推送到 Github 存储库。导航到存储库中的此文件，单击 RAW 按钮。复制 URL 地址到 '/publish/'。它看起来像这样
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/
- 在 ClickOnce 安装程序中输入以下路径
- 发布路径：
{repo-path}/pubhished
- 安装路径：
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/
这是安装程序将从中安装您的应用程序的服务器地址。
- 更新路径：
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/
这是安装程序将从中检查更新的服务器地址。
注意： 使用此 link 浏览 clickonce 安装程序：
https://docs.microsoft.com/en-us/visualstudio/deployment/quickstart-deploy-using-clickonce-folder?view=vs-2022。
确保在发布前检查 'Create Desktop Shortcut' 选项。现在提交并推送您的代码。
- 现在在 /published 文件夹中单击安装程序来安装应用程序。这将连接 GitHub 服务器以在您的计算机上的目录
C:\Users\vib28\AppData\Local\Apps.0. 中下载和安装所需的文件
- 要发布应用程序更新，请按照以下步骤操作
- 对您的 C# 应用程序进行更改。
- 再次发布应用程序（到同一文件夹/published）。修订号应该增加，并且应该有一个新文件夹添加到位置
/published/Application Files
- 提交代码并将其推送到 GitHub。现在原始文件已经更新。所以每当客户端运行他的应用程序时，它会自动提示下载更新。
我一直在努力找出使用 ClickOnce 部署 WPF 应用程序的最佳方法。我会从 GitHub URL 下载安装文件，然后祈祷，然后 运行 每次都这样：
PLATFORM VERSION INFO
Windows : 10.0.15063.0 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.7.2046.0 built by: NET47REL1
clr.dll : 4.7.3130.0 built by: NET472REL1LAST_B
dfdll.dll : 4.7.2046.0 built by: NET47REL1
dfshim.dll : 10.0.15063.0 (WinBuild.160101.0800)
SOURCES
Deployment url : https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application resulted in exception. Following failure messages were detected:
+ Exception reading manifest from https://github.com/SuperScrub837/blob/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application: the manifest may not be valid or the file could not be opened.
+ DTD is prohibited in this XML document.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/14/2018 8:21:48 PM] : Activation of https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/14/2018 8:21:50 PM] System.Deployment.Application.InvalidDeploymentException (ManifestParse)
- Exception reading manifest from https://github.com/SuperScrub837/blob/master/SuperScrub837/SuperScrub837/publish/SuperScrub837.application: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl, Uri& deploymentUri)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Xml.XmlException
- DTD is prohibited in this XML document.
- Source: System.Xml
- Stack trace:
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.ParseDoctypeDecl()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Deployment.Application.ManifestValidatingReader.XmlFilteredReader.Read()
at System.Xml.XsdValidatingReader.Read()
at System.Deployment.Application.ManifestReader.FromDocument(String localPath, ManifestType manifestType, Uri sourceUri)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
我一直在尝试关注我发现的一些博客，并在 .gitignore 中创建了以下内容：
## Ignore Visual Studio temporary files, build results, and
## files generated by popular Visual Studio add-ons.
##
## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
#Allow publish directory
!publish/
# User-specific files
*.suo
*.user
*.userosscache
*.sln.docstates
# User-specific files (MonoDevelop/Xamarin Studio)
*.userprefs
# Build results
[Dd]ebug/
[Dd]ebugPublic/
[Rr]elease/
[Rr]eleases/
x64/
x86/
bld/
[Bb]in/
[Oo]bj/
[Ll]og/
# Visual Studio 2015 cache/options directory
.vs/
# Uncomment if you have tasks that create the project's static files in wwwroot
#wwwroot/
# MSTest test Results
[Tt]est[Rr]esult*/
[Bb]uild[Ll]og.*
# NUNIT
*.VisualState.xml
TestResult.xml
# Build Results of an ATL Project
[Dd]ebugPS/
[Rr]eleasePS/
dlldata.c
# .NET Core
project.lock.json
project.fragment.lock.json
artifacts/
**/Properties/launchSettings.json
*_i.c
*_p.c
*_i.h
*.ilk
*.meta
*.obj
*.pch
*.pdb
*.pgc
*.pgd
*.rsp
*.sbr
*.tlb
*.tli
*.tlh
*.tmp
*.tmp_proj
*.log
*.vspscc
*.vssscc
.builds
*.pidb
*.svclog
*.scc
# Chutzpah Test files
_Chutzpah*
# Visual C++ cache files
ipch/
*.aps
*.ncb
*.opendb
*.opensdf
*.sdf
*.cachefile
*.VC.db
*.VC.VC.opendb
# Visual Studio profiler
*.psess
*.vsp
*.vspx
*.sap
# TFS 2012 Local Workspace
$tf/
# Guidance Automation Toolkit
*.gpState
# ReSharper is a .NET coding add-in
_ReSharper*/
*.[Rr]e[Ss]harper
*.DotSettings.user
# JustCode is a .NET coding add-in
.JustCode
# TeamCity is a build add-in
_TeamCity*
# DotCover is a Code Coverage Tool
*.dotCover
# Visual Studio code coverage results
*.coverage
*.coveragexml
# NCrunch
_NCrunch_*
.*crunch*.local.xml
nCrunchTemp_*
# MightyMoose
*.mm.*
AutoTest.Net/
# Web workbench (sass)
.sass-cache/
# Installshield output folder
[Ee]xpress/
# DocProject is a documentation generator add-in
DocProject/buildhelp/
DocProject/Help/*.HxT
DocProject/Help/*.HxC
DocProject/Help/*.hhc
DocProject/Help/*.hhk
DocProject/Help/*.hhp
DocProject/Help/Html2
DocProject/Help/html
# Click-Once directory
publish/
# Publish Web Output
*.[Pp]ublish.xml
*.azurePubxml
# TODO: Comment the next line if you want to checkin your web deploy settings
# but database connection strings (with potential passwords) will be unencrypted
*.pubxml
*.publishproj
# Microsoft Azure Web App publish settings. Comment the next line if you want to
# checkin your Azure Web App publish settings, but sensitive information contained
# in these scripts will be unencrypted
PublishScripts/
# NuGet Packages
*.nupkg
# The packages folder can be ignored because of Package Restore
**/packages/*
# except build/, which is used as an MSBuild target.
!**/packages/build/
# Uncomment if necessary however generally it will be regenerated when needed
#!**/packages/repositories.config
# NuGet v3's project.json files produces more ignorable files
*.nuget.props
*.nuget.targets
# Microsoft Azure Build Output
csx/
*.build.csdef
# Microsoft Azure Emulator
ecf/
rcf/
# Windows Store app package directories and files
AppPackages/
BundleArtifacts/
Package.StoreAssociation.xml
_pkginfo.txt
# Visual Studio cache files
# files ending in .cache can be ignored
*.[Cc]ache
# but keep track of directories ending in .cache
!*.[Cc]ache/
# Others
ClientBin/
~$*
*~
*.dbmdl
*.dbproj.schemaview
*.jfm
*.pfx
*.publishsettings
orleans.codegen.cs
# Since there are multiple workflows, uncomment next line to ignore bower_components
# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
#bower_components/
# RIA/Silverlight projects
Generated_Code/
# Backup & report files from converting an old project file
# to a newer Visual Studio version. Backup files are not needed,
# because we have git ;-)
_UpgradeReport_Files/
Backup*/
UpgradeLog*.XML
UpgradeLog*.htm
# SQL Server files
*.mdf
*.ldf
*.ndf
# Business Intelligence projects
*.rdl.data
*.bim.layout
*.bim_*.settings
# Microsoft Fakes
FakesAssemblies/
# GhostDoc plugin setting file
*.GhostDoc.xml
# Node.js Tools for Visual Studio
.ntvs_analysis.dat
node_modules/
# Typescript v1 declaration files
typings/
# Visual Studio 6 build log
*.plg
# Visual Studio 6 workspace options file
*.opt
# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
*.vbw
# Visual Studio LightSwitch build output
**/*.HTMLClient/GeneratedArtifacts
**/*.DesktopClient/GeneratedArtifacts
**/*.DesktopClient/ModelManifest.xml
**/*.Server/GeneratedArtifacts
**/*.Server/ModelManifest.xml
_Pvt_Extensions
# Paket dependency manager
.paket/paket.exe
paket-files/
# FAKE - F# Make
.fake/
# JetBrains Rider
.idea/
*.sln.iml
# CodeRush
.cr/
# Python Tools for Visual Studio (PTVS)
__pycache__/
*.pyc
# Cake - Uncomment if you are using it
# tools/**
# !tools/packages.config
# Telerik's JustMock configuration file
*.jmconfig
# BizTalk build output
*.btp.cs
*.btm.cs
*.odx.cs
*.xsd.cs
这是我的 .gitattributes 文件中的代码：
*.manifest binary
*.application binary
*.deploy binary
事实证明，这对我来说比我应该做的更痛苦。我希望用户能够从 GitHub link 安装并更新应用程序。
想法？
因此，在 GitHub 上发布我的 ClickOnce 可执行文件的目的是允许在我的软件更新时从该存储库下载更新。正如本网站上的许多人所知，GitHub 不鼓励下载原始文件，因为他们通常希望自己成为代码本身的存储库系统 - 他们不希望下载时间过长等。
请记住，至少目前我一直在构建的这个应用程序是轻量级的，所以由于我目前没有可用资源的替代方案，我决定保留这些更新的可执行文件在回购协议本身。如果有人想这样做，这里有一个提示，您以前可能已经看过 - 尝试使用以下 URL:
https://github.com/SuperScrub837/raw/master/SuperScrub837/SuperScrub837/publish/
而不是：
https://github.com/SuperScrub837/tree/master/SuperScrub837/SuperScrub837/publish/
在项目的 ClickOnce 首选项中。
当我使用 link 的原始版本时，另一个应用程序上部署的应用程序成功更新，没有任何错误。希望这会有所帮助并且不会太过分 - 另外，这篇文章可能属于 ServerFault 之类的，所以我很抱歉，因为我在这里提出了这个问题。
错误存在是因为您没有使用原始 GitHub 进行文件托管。 Raw GitHub 本质上就像一个免费的 FTP 服务器，您可以使用它来免费托管您的 .NET 应用程序。
按照以下步骤操作：
（我还在此处创建了一个说明性视频：https://youtu.be/iMEGtrjMXPU）
- 如果您的项目不在 GitHub 上，请创建一个存储库并将您的代码推送到那里。必须是 public.
- 在您的计算机上，在存储库的根目录下创建一个名为 'published' 的文件夹。确保在 .gitignore 中没有忽略此文件夹
- 在此 /published 文件夹中创建一个名为 .gitattributes 的文件。添加以下内容
*.manifest binary
*.application binary
*.deploy binary
* -text
- 现在提交并推送到 Github 存储库。导航到存储库中的此文件，单击 RAW 按钮。复制 URL 地址到 '/publish/'。它看起来像这样
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/ - 在 ClickOnce 安装程序中输入以下路径
- 发布路径：
{repo-path}/pubhished - 安装路径：
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/这是安装程序将从中安装您的应用程序的服务器地址。 - 更新路径：
https://raw.githubusercontent.com/{your-account-name}/{your-repo-name}/{branch}/published/这是安装程序将从中检查更新的服务器地址。
注意： 使用此 link 浏览 clickonce 安装程序：
https://docs.microsoft.com/en-us/visualstudio/deployment/quickstart-deploy-using-clickonce-folder?view=vs-2022。
确保在发布前检查 'Create Desktop Shortcut' 选项。现在提交并推送您的代码。
- 发布路径：
- 现在在 /published 文件夹中单击安装程序来安装应用程序。这将连接 GitHub 服务器以在您的计算机上的目录
C:\Users\vib28\AppData\Local\Apps.0. 中下载和安装所需的文件
- 要发布应用程序更新，请按照以下步骤操作
- 对您的 C# 应用程序进行更改。
- 再次发布应用程序（到同一文件夹/published）。修订号应该增加，并且应该有一个新文件夹添加到位置
/published/Application Files - 提交代码并将其推送到 GitHub。现在原始文件已经更新。所以每当客户端运行他的应用程序时，它会自动提示下载更新。