以可编程方式为 seq 设置 Nlog

Question

我需要在 C# 上编写 Nlog 的代码配置，而不是将日志发送到 seq 服务器的 nlog.config。我不明白我应该使用哪个 Nlog 库来完成它。我一直在尝试多种选择，但对我没有用。 nlog.config 代码如下：

  <targets>
      <target name="seq" xsi:type="BufferingWrapper" bufferSize="1000" 
         flushTimeout="2000">
       <target xsi:type="Seq" serverUrl="http://localhost:5341" apiKey="" />
       </target>
   </targets>
   <rules>
     <logger name="*" minlevel="Info" writeTo="seq" />
    </rules>

如果你能写出所需的完整代码，我会很高兴。

Answer 1

如果我不能使用 XML 文件

，这是我的 Nlog 配置器

定义记录器变量：

 private readonly Logger _logger = LogManager.GetCurrentClassLogger();

在 class 的构造函数中使用它，例如：

(new NLogConfigurator()).ConfigureSeqBufferTarget();

配置的激活由class本身完成：

LogManager.Configuration = config;

这是 NLogConfigurator。我主要是从NLog API

那里得到的

public class NLogConfigurator
{
    private readonly string _logFileNamePattern;
    private readonly string _logLayoutPattern;

    public NLogConfigurator(string logFileNamePattern)
    {
        _logFileNamePattern = logFileNamePattern;
    }

    public NLogConfigurator()
    {
        string addInName = this.GetType().Assembly.GetName().Name;
        _logFileNamePattern = "${specialfolder:folder=CommonApplicationData}/Company/zenon/${processname}_" + addInName  + ".log";

        /* Layout of LogMessages:
         * See: https://github.com/nlog/NLog/wiki/Layout-Renderers
         * ${callsite} - The call site (class name, method name and source information).
         * ${message} - The formatted log message.
         * ${onexception} - Only outputs the inner layout when exception has been defined for log message.
         */
        _logLayoutPattern = @"${callsite} ${message} ${onexception:Exception information\:${exception:format=type,message,method,StackTrace:maxInnerExceptionLevel=5:innerFormat=type,message,method,StackTrace}";
    }

    public void Configure()
    {
        // See: https://github.com/nlog/NLog/wiki/Configuration-API

        // Step 1. Create configuration object 
        var config = new LoggingConfiguration();

        // Step 2. Create targets and add them to the configuration
        // See http://sentinel.codeplex.com/ for a log viewer 
        var viewerTarget = new NLogViewerTarget();
        config.AddTarget("viewer", viewerTarget);

        var fileTarget = new FileTarget();
        config.AddTarget("file", fileTarget);

        // Step 3. Set target properties 
        viewerTarget.Layout = _logLayoutPattern;
        viewerTarget.Address = "udp://127.0.0.1:9999";
        fileTarget.FileName = _logFileNamePattern;
        fileTarget.Layout = _logLayoutPattern;

        // Step 4. Define rules
        var rule1 = new LoggingRule("*", LogLevel.Debug, viewerTarget);
        config.LoggingRules.Add(rule1);

        var rule2 = new LoggingRule("*", LogLevel.Debug, fileTarget);
        config.LoggingRules.Add(rule2);

        // Step 5. Activate the configuration
        LogManager.Configuration = config;
    }


    public void ConfigureUDPTarget()
    {
        ConfigureUDPTarget(LogLevel.Debug);
    }

    public void ConfigureUDPTarget(LogLevel level, string ip = "udp://127.0.0.1:9999")
    {
        // See: https://github.com/nlog/NLog/wiki/Configuration-API

        // Step 1. Create configuration object 
        var config = new LoggingConfiguration();

        // Step 2. Create targets and add them to the configuration
        // See http://sentinel.codeplex.com/ for a log viewer 
        var viewerTarget = GetNLogViewerTarget(ip);

        var fileTarget = new FileTarget();
        config.AddTarget("file", fileTarget);

        // Step 3. Set target properties 
        fileTarget.FileName = _logFileNamePattern;
        fileTarget.Layout = _logLayoutPattern;

        // Step 4. Define rules
        var rule1 = new LoggingRule("*", level, viewerTarget);
        config.LoggingRules.Add(rule1);

        var rule2 = new LoggingRule("*", level, fileTarget);
        config.LoggingRules.Add(rule2);

        // Step 5. Activate the configuration
        LogManager.Configuration = config;
    }

    public void ConfigureSeqBufferTarget(LogLevel level, 
        string url = "http://localhost:5341", 
        string apiKey = "",
        int bufferSize= 1000,
        int flushTimeout= 2000)
    {
        // See: https://github.com/nlog/NLog/wiki/Configuration-API

        // Step 1. Create configuration object 
        var config = new LoggingConfiguration();
        var seqTarget = GetSeqTarget(url, apiKey);

        var bufferWrapper = new BufferingTargetWrapper
        {
            Name = "seq",
            BufferSize = bufferSize,
            FlushTimeout = flushTimeout,
            WrappedTarget = seqTarget
        };

        config.AddTarget(bufferWrapper);

        // Step 4. Define rules
        var rule1 = new LoggingRule("*", level, bufferWrapper);
        config.LoggingRules.Add(rule1);

        // Step 5. Activate the configuration
        LogManager.Configuration = config;
    }

    private Target GetNLogViewerTarget(string ip = "udp://127.0.0.1:9999")
    {
        return new NLogViewerTarget
        {
            Address = ip,
            Layout = _logLayoutPattern
        };
    }

    private Target GetSeqTarget(string url = "http://localhost:5341", string apiKey="")
    {
        return new SeqTarget
        {
            ServerUrl = url,
            ApiKey = apiKey
        };
    }

}

以可编程方式为 seq 设置 Nlog

Set up Nlog for seq programmably

c#

nlog

seq