在具有重复属性和一些不重复属性的 ARM 模板中使用复制命令

Question

我正在创建一个包含 FTP 流量规则的 ARM 模板。我想在负载均衡器的探针属性中使用复制命令来为一系列端口创建探针，但我还有其他不需要重复的探针（落在副本之外） .当我尝试同时添加两者时，ARM 模板说它无效，因为探测器属性已经存在。除了其他值之外，是否可以使用 "copy" 语法，或者 "copy" 必须是构建整个数组值列表的唯一 ARM 语法？

{
  "type": "Microsoft.Network/loadBalancers",
  "sku": {
    "name": "Standard",
    "tier": "Regional"
  },
  "name": "[variables('lb-csl-private.name')]",
  "apiVersion": "2018-10-01",
  "location": "[resourceGroup().location]",
  "scale": null,
  "properties": {
    "frontendIPConfigurations": [
      {
        "name": "LoadBalancerFrontEnd",
        "properties": {
          "privateIPAddress": "[variables('ip-lb-csl-private')]",
          "privateIPAllocationMethod": "Dynamic",
          "subnet": {
            "id": "[resourceId('Microsoft.Network/virtualNetworks/subnets', variables('vnet-csl.name'), variables('vnet-csl.subnets.loadBalancerName'))]"
          }
        }
      }
    ],
    "copy": [
      {
        "name": "probes",
        "count": 10,
        "input": {
          "name": "[concat('probe-CSL-PASV-', copyIndex('probes'))]",
          "properties": {
            "protocol": "Tcp",
            "port": "[copyIndex('probes')]",
            "inervalInSeconds": 5,
            "numberOfProbes": 2
          }
        }
      }
    ],
    "probes": [
      {
        "name": "probe-CSL-FTP",
        "properties": {
          "protocol": "Tcp",
          "port": 21,
          "intervalInSeconds": 5,
          "numberOfProbes": 2
        }
      }
    ],
    "inboundNatRules": [],
    "outboundRules": [],
    "inboundNatPools": []
  }
}

Answer 1

可以使用变量来做到这一点：

"variables": {
    "copy": [
      {
        "name": "probes",
        "count": 10,
        "input": {
          "name": "[concat('probe-CSL-PASV-', copyIndex('probes'))]",
          "properties": {
            "protocol": "Tcp",
            "port": "[copyIndex('probes')]",
            "inervalInSeconds": 5,
            "numberOfProbes": 2
          }
        }
      }
    ],
    "otherProbes": [
        {
             probe1
        },
        {
             probe2
        },
        etc
    ]
}

然后，在您的负载均衡器中：

"probes": "[concat(variables('probes'), variables('otherProbes'))]"

在具有重复属性和一些不重复属性的 ARM 模板中使用复制命令

Using Copy command in ARM template with properties that repeat and some that do not

arm-template