在 Apache 服务器上监控：为什么在 /var/log/monit 上监控日志“'apache' 错误 -- 未知资源 ID：[5]”
Monit on apache server : why monit log " 'apache' error -- unknown resource ID: [5]" on /var/log/monit
我们正在使用 Monit 监控多台服务器。我们使用的是 5.25.1 版本。
有些是专用的 apache 服务器。监控没问题。
但是monit(/var/log/monit)的日志是这样的:
[CET Mar 18 03:12:03] info : Starting Monit 5.25.1 daemon with http interface at [0.0.0.0]:3353
[CET Mar 18 03:12:03] info : Monit start delay set to 180s
[CET Mar 18 03:15:03] info : 'xxxxx.localhost' Monit 5.25.1 started
[CET Mar 18 03:15:03] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:16:08] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:17:08] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:18:08] error : 'apache' error -- unknown resource ID: [5]
配置文件/etc/monit.conf是这样的：
###############################################################################
## Monit control file
###############################################################################
###############################################################################
## Global section
###############################################################################
##
## Start Monit in the background (run as a daemon):
# check services at 2-minute intervals
# with start delay 240 # optional: delay the first check by 4-minutes (by
# # default Monit check immediately after Monit start)
set daemon 60
with start delay 180
### Set the location of the Monit id file which stores the unique id for the
### Monit instance. The id is generated and stored on first Monit start. By
### default the file is placed in $HOME/.monit.id.
#
set idfile /var/.monit.id
## Set the list of mail servers for alert delivery. Multiple servers may be
## specified using a comma separator. By default Monit uses port 25 - it is
## possible to override this with the PORT option.
#
# set mailserver mail.bar.baz, # primary mailserver
# backup.bar.baz port 10025, # backup mailserver on port 10025
# localhost # fallback relay
set mailserver localhost
## By default Monit will drop alert events if no mail servers are available.
## If you want to keep the alerts for later delivery retry, you can use the
## EVENTQUEUE statement. The base directory where undelivered alerts will be
## stored is specified by the BASEDIR option. You can limit the maximal queue
## size using the SLOTS option (if omitted, the queue is limited by space
## available in the back end filesystem).
#
set eventqueue
basedir /var/monit # set the base directory where events will be stored
slots 100 # optionally limit the queue size
## Send status and events to M/Monit (for more informations about M/Monit
## see http://mmonit.com/).
#
# set mmonit http://monit:monit@192.168.1.10:8080/collector
#
#
## Monit by default uses the following alert mail format:
##
##
## You can override this message format or parts of it, such as subject
## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
## are expanded at runtime. For example, to override the sender, use:
#
# set mail-format { from: monit@foo.bar }
#
#
## You can set alert recipients whom will receive alerts if/when a
## service defined in this file has errors. Alerts may be restricted on
## events by using a filter as in the second example below.
#
set alert fake@mail.com not on { instance }
# receive all alerts
# set alert manager@foo.bar only on { timeout } # receive just service-
# # timeout alert
#
mail-format {
from: xxxxxxx@monit.localhost
subject: $SERVICE => $EVENT
message:
DESCRIPTION : $DESCRIPTION
ACTION : $ACTION
DATE : $DATE
HOST : $HOST
Sorry for the spam.
Monit
}
## Monit has an embedded web server which can be used to view status of
## services monitored and manage services from a web interface. See the
## Monit Wiki if you want to enable SSL for the web server.
#
set httpd port 3353 and
use address 0.0.0.0
allow yyyyy:zzzz
###############################################################################
## SeSTART rvices
###############################################################################
##
## Check general system resources such as load average, cpu and memory
## usage. Each test specifies a resource, conditions and the action to be
## performed should a test fail.
#
check system xxxxxx.localhost
if loadavg (1min) > 8 for 5 cycles then alert
if loadavg (5min) > 4 for 5 cycles then alert
if memory usage > 75% for 5 cycles then alert
if cpu usage (user) > 70% for 5 cycles then alert
if cpu usage (system) > 50% for 5 cycles then alert
if cpu usage (wait) > 50% for 5 cycles then alert
check process apache with pidfile /var/run/httpd/httpd.pid
group www
start program = "/etc/init.d/httpd start" with timeout 60 seconds
stop program = "/etc/init.d/httpd stop"
if failed host localhost port 80 then restart
if cpu > 60% for 2 cycles then alert
if cpu > 80% for 5 cycles then restart
if loadavg(5min) greater than 10 for 8 cycles then restart
if 3 restarts within 5 cycles then timeout
###############################################################################
## Includes
###############################################################################
##
## It is possible to include additional configuration parts from other files or
## directories.
#
# include /etc/monit.d/*
#
#
# Include all files from /etc/monit.d/
include /etc/monit.d/*
在 ui monit 上，一切正常。并且监控是 100% 有用的。我们可以像我们想要的那样停止、重启服务。
所以我不明白我们在 monit 的日志中找到的句子“错误：'apache' 错误 -- 未知资源 ID：[5]”。
有人对此有想法吗？
感谢您的帮助。
我遇到了同样的问题..
mmonit 说 loadavg 仅用于 "check system"。它曾经适用于 apache，但现在不行了..
"loadavg 语句只能在 "check system" 上下文中使用（平均负载是系统 属性，不是进程'）。请删除以下语句并重新加载 monit"
所以通过在第一个上添加 # 来禁用此行：
# if loadavg(5min) greater than 10 for 8 cycles then restart
然后重启monit
service monit restart
您将不会再收到 appache 错误。
我们正在使用 Monit 监控多台服务器。我们使用的是 5.25.1 版本。 有些是专用的 apache 服务器。监控没问题。 但是monit(/var/log/monit)的日志是这样的:
[CET Mar 18 03:12:03] info : Starting Monit 5.25.1 daemon with http interface at [0.0.0.0]:3353
[CET Mar 18 03:12:03] info : Monit start delay set to 180s
[CET Mar 18 03:15:03] info : 'xxxxx.localhost' Monit 5.25.1 started
[CET Mar 18 03:15:03] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:16:08] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:17:08] error : 'apache' error -- unknown resource ID: [5]
[CET Mar 18 03:18:08] error : 'apache' error -- unknown resource ID: [5]
配置文件/etc/monit.conf是这样的：
###############################################################################
## Monit control file
###############################################################################
###############################################################################
## Global section
###############################################################################
##
## Start Monit in the background (run as a daemon):
# check services at 2-minute intervals
# with start delay 240 # optional: delay the first check by 4-minutes (by
# # default Monit check immediately after Monit start)
set daemon 60
with start delay 180
### Set the location of the Monit id file which stores the unique id for the
### Monit instance. The id is generated and stored on first Monit start. By
### default the file is placed in $HOME/.monit.id.
#
set idfile /var/.monit.id
## Set the list of mail servers for alert delivery. Multiple servers may be
## specified using a comma separator. By default Monit uses port 25 - it is
## possible to override this with the PORT option.
#
# set mailserver mail.bar.baz, # primary mailserver
# backup.bar.baz port 10025, # backup mailserver on port 10025
# localhost # fallback relay
set mailserver localhost
## By default Monit will drop alert events if no mail servers are available.
## If you want to keep the alerts for later delivery retry, you can use the
## EVENTQUEUE statement. The base directory where undelivered alerts will be
## stored is specified by the BASEDIR option. You can limit the maximal queue
## size using the SLOTS option (if omitted, the queue is limited by space
## available in the back end filesystem).
#
set eventqueue
basedir /var/monit # set the base directory where events will be stored
slots 100 # optionally limit the queue size
## Send status and events to M/Monit (for more informations about M/Monit
## see http://mmonit.com/).
#
# set mmonit http://monit:monit@192.168.1.10:8080/collector
#
#
## Monit by default uses the following alert mail format:
##
##
## You can override this message format or parts of it, such as subject
## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
## are expanded at runtime. For example, to override the sender, use:
#
# set mail-format { from: monit@foo.bar }
#
#
## You can set alert recipients whom will receive alerts if/when a
## service defined in this file has errors. Alerts may be restricted on
## events by using a filter as in the second example below.
#
set alert fake@mail.com not on { instance }
# receive all alerts
# set alert manager@foo.bar only on { timeout } # receive just service-
# # timeout alert
#
mail-format {
from: xxxxxxx@monit.localhost
subject: $SERVICE => $EVENT
message:
DESCRIPTION : $DESCRIPTION
ACTION : $ACTION
DATE : $DATE
HOST : $HOST
Sorry for the spam.
Monit
}
## Monit has an embedded web server which can be used to view status of
## services monitored and manage services from a web interface. See the
## Monit Wiki if you want to enable SSL for the web server.
#
set httpd port 3353 and
use address 0.0.0.0
allow yyyyy:zzzz
###############################################################################
## SeSTART rvices
###############################################################################
##
## Check general system resources such as load average, cpu and memory
## usage. Each test specifies a resource, conditions and the action to be
## performed should a test fail.
#
check system xxxxxx.localhost
if loadavg (1min) > 8 for 5 cycles then alert
if loadavg (5min) > 4 for 5 cycles then alert
if memory usage > 75% for 5 cycles then alert
if cpu usage (user) > 70% for 5 cycles then alert
if cpu usage (system) > 50% for 5 cycles then alert
if cpu usage (wait) > 50% for 5 cycles then alert
check process apache with pidfile /var/run/httpd/httpd.pid
group www
start program = "/etc/init.d/httpd start" with timeout 60 seconds
stop program = "/etc/init.d/httpd stop"
if failed host localhost port 80 then restart
if cpu > 60% for 2 cycles then alert
if cpu > 80% for 5 cycles then restart
if loadavg(5min) greater than 10 for 8 cycles then restart
if 3 restarts within 5 cycles then timeout
###############################################################################
## Includes
###############################################################################
##
## It is possible to include additional configuration parts from other files or
## directories.
#
# include /etc/monit.d/*
#
#
# Include all files from /etc/monit.d/
include /etc/monit.d/*
在 ui monit 上，一切正常。并且监控是 100% 有用的。我们可以像我们想要的那样停止、重启服务。
所以我不明白我们在 monit 的日志中找到的句子“错误：'apache' 错误 -- 未知资源 ID：[5]”。
有人对此有想法吗？
感谢您的帮助。
我遇到了同样的问题..
mmonit 说 loadavg 仅用于 "check system"。它曾经适用于 apache，但现在不行了..
"loadavg 语句只能在 "check system" 上下文中使用（平均负载是系统 属性，不是进程'）。请删除以下语句并重新加载 monit"
所以通过在第一个上添加 # 来禁用此行：
# if loadavg(5min) greater than 10 for 8 cycles then restart
然后重启monit
service monit restart
您将不会再收到 appache 错误。