是否记录了 Exchange IPM.Contact 属性 0x8043 和 0x8044？
Are Exchange IPM.Contact properties 0x8043 and 0x8044 documented?
在 IPM.Contact 的 MSG 文件中（联系人 > 另存为... > MSG），我可以看到 ID 为 8043[= 的条目27=] 和 8044 由 Samsung Contacts 应用程序插入以存储样本值 IMAddress2 和 IMAddress3，我在三星 phone 中手动输入联系人记录： （并等待使用标准 Exchange 连接器与 outlook.com 同步）
__substg1.0_8043001F → IMAddress2
__substg1.0_8044001F → IMAddress3
我看不到 MS-OXPROPS 文档中明确列出的这些字段 ID。它们是否来自某个范围供定制使用？或者他们在某处有他们的常规列名？是否可以通过将具有适当名称的自定义列添加到列表视图中，在 Outlook UI 中将它们可视化？
（另请参阅：Initial question from user viewpoint 导致撰写此问题。）
这些是您建议的所谓“自定义属性”。
MS-OXPROPS Section 1.3.3: Property ID Ranges 说：
Range Minimum: 0x8000
Range Maximum: 0xFFFF
Description: Reserved for mapping to named properties. The exceptions to this rule are some of the address book tagged properties (those with names beginning with PIDTagAddressBook). Many are static property IDs but are in this range.
命名属性在 MS-PST, Section 2.4.2.2 中定义：
Named properties are a special type of properties which reside in a reserved range of property identifier values (that is, WORD values between 0x8000 and 0x8FFF). Named properties, unlike standard properties, have names and meanings that are context-specific.
这些属性导出到 msg 文件，在 Named Property Mapping Storage (MS-OXMSG Section 2.2.3 & ff).
在 IPM.Contact 的 MSG 文件中（联系人 > 另存为... > MSG），我可以看到 ID 为 8043[= 的条目27=] 和 8044 由 Samsung Contacts 应用程序插入以存储样本值 IMAddress2 和 IMAddress3，我在三星 phone 中手动输入联系人记录： （并等待使用标准 Exchange 连接器与 outlook.com 同步）
__substg1.0_8043001F →
IMAddress2
__substg1.0_8044001F →IMAddress3
我看不到 MS-OXPROPS 文档中明确列出的这些字段 ID。它们是否来自某个范围供定制使用？或者他们在某处有他们的常规列名？是否可以通过将具有适当名称的自定义列添加到列表视图中，在 Outlook UI 中将它们可视化？
（另请参阅：Initial question from user viewpoint 导致撰写此问题。）
这些是您建议的所谓“自定义属性”。
MS-OXPROPS Section 1.3.3: Property ID Ranges 说：
Range Minimum: 0x8000
Range Maximum: 0xFFFF
Description: Reserved for mapping to named properties. The exceptions to this rule are some of the address book tagged properties (those with names beginning with PIDTagAddressBook). Many are static property IDs but are in this range.
命名属性在 MS-PST, Section 2.4.2.2 中定义：
Named properties are a special type of properties which reside in a reserved range of property identifier values (that is, WORD values between 0x8000 and 0x8FFF). Named properties, unlike standard properties, have names and meanings that are context-specific.
这些属性导出到 msg 文件，在 Named Property Mapping Storage (MS-OXMSG Section 2.2.3 & ff).