PlatformIO:[上传] esp8266 ESP-07 板错误 2
PlatformIO:[upload] Error 2 with esp8266 ESP-07 board
我使用 VSCODE 创建项目。我创建一个项目 select ESp-07 board 和 ESP8266 RTOS SDK framework 然后在 src 目录中创建一个 main.c 文件并复制 main.c 文件的内容 esp8266-rtos-sdk-blink 示例添加到我的项目 main.c 文件中。它 compile successfully 但是当我想将它上传到我的板时发生以下错误：
Processing esp07 (platform: espressif8266; framework: esp8266-rtos-sdk; board: esp07)
Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif8266/esp07.html
PLATFORM: Espressif 8266 2.3.2 > Espressif Generic ESP8266 ESP-07
HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash
PACKAGES: toolchain-xtensa 1.40802.0 (4.8.2), framework-esp8266-rtos-sdk 1.5.0-beta.5, tool-esptool
1.413.0 (4.13), tool-esptoolpy 1.20800.0 (2.8.0), tool-mkspiffs 1.200.0 (2.0)
LDF: Library Dependency Finder -> bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 0 compatible libraries
Scanning dependencies…
No dependencies
Building in release mode
Retrieving maximum program size .pio\build\esp07\firmware.elf
Checking size .pio\build\esp07\firmware.elf
Advanced Memory Usage is available via “PlatformIO Home > Project Inspect”
DATA: [==== ] 36.3% (used 29754 bytes from 81920 bytes)
PROGRAM: [======= ] 73.9% (used 278664 bytes from 376832 bytes)
Configuring upload protocol…
AVAILABLE: espota, esptool
CURRENT: upload_protocol = esptool
Looking for upload port…
Auto-detected: COM3
Uploading .pio\build\esp07\firmware.bin
esptool.py v2.8
Serial port COM3
Connecting…
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 5c:cf:7f:33:a6:e6
Uploading stub…
Running stub…
Stub running…
Configuring flash size…
Auto-detected Flash size: 1MB
A fatal error occurred: File C:\Users\MrTavakoli.platformio\packages\framework-esp8266-rtos-sdk\bin\esp_init_data_default.bin (length 128) at offset 4177920 will not fit in 1048576 bytes of flash. Use --flash-size argument, or change flashing address.
*** [upload] Error 2
我成功地使用 Arduino 框架测试了我的开发板。
谢谢
我使用esp01-1M板代替esp07板，编译成功上传到esp07板。
再次将开发板换成 esp07 并添加
board_upload.maximum_size = 1048576
到platformio.ini文件编译上传toesp07`板成功。
我从 esp01_1m.json 文件中找到了 1048576 个值。
我使用 VSCODE 创建项目。我创建一个项目 select ESp-07 board 和 ESP8266 RTOS SDK framework 然后在 src 目录中创建一个 main.c 文件并复制 main.c 文件的内容 esp8266-rtos-sdk-blink 示例添加到我的项目 main.c 文件中。它 compile successfully 但是当我想将它上传到我的板时发生以下错误：
Processing esp07 (platform: espressif8266; framework: esp8266-rtos-sdk; board: esp07)
Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif8266/esp07.html
PLATFORM: Espressif 8266 2.3.2 > Espressif Generic ESP8266 ESP-07
HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash
PACKAGES: toolchain-xtensa 1.40802.0 (4.8.2), framework-esp8266-rtos-sdk 1.5.0-beta.5, tool-esptool
1.413.0 (4.13), tool-esptoolpy 1.20800.0 (2.8.0), tool-mkspiffs 1.200.0 (2.0)
LDF: Library Dependency Finder -> bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 0 compatible libraries
Scanning dependencies…
No dependencies
Building in release mode
Retrieving maximum program size .pio\build\esp07\firmware.elf
Checking size .pio\build\esp07\firmware.elf
Advanced Memory Usage is available via “PlatformIO Home > Project Inspect”
DATA: [==== ] 36.3% (used 29754 bytes from 81920 bytes)
PROGRAM: [======= ] 73.9% (used 278664 bytes from 376832 bytes)
Configuring upload protocol…
AVAILABLE: espota, esptool
CURRENT: upload_protocol = esptool
Looking for upload port…
Auto-detected: COM3
Uploading .pio\build\esp07\firmware.bin
esptool.py v2.8
Serial port COM3
Connecting…
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 5c:cf:7f:33:a6:e6
Uploading stub…
Running stub…
Stub running…
Configuring flash size…
Auto-detected Flash size: 1MB
A fatal error occurred: File C:\Users\MrTavakoli.platformio\packages\framework-esp8266-rtos-sdk\bin\esp_init_data_default.bin (length 128) at offset 4177920 will not fit in 1048576 bytes of flash. Use --flash-size argument, or change flashing address.
*** [upload] Error 2
我成功地使用 Arduino 框架测试了我的开发板。
谢谢
我使用esp01-1M板代替esp07板，编译成功上传到esp07板。 再次将开发板换成 esp07 并添加
board_upload.maximum_size = 1048576
到platformio.ini文件编译上传toesp07`板成功。 我从 esp01_1m.json 文件中找到了 1048576 个值。