Latex/Miktex：未定义的引用
Latex/Miktex: Undefined citations
我正在为我的工作编写乳胶脚本，但在获取 PDF 中的参考文献时遇到了无限麻烦。我的代码如下所示，我在 RStudio 上使用 MikTex 2.9。一些可能相关的背景信息：
- 我正在使用 Mendeley 作为我的参考资料，我已经正确设置（看起来）以启用 bibtex 同步
- .bib文件对我来说似乎并不陌生（下面添加了Irungu）
- 我使用的脚本与我的同事完全相同（除了引用我文章的路径不同），而且他们将其编译成 pdf 没有任何问题。
- 关于引用的错误是：
第 1 页上的引用 Draganovic2013 在输入行 xx 上未定义
第 1 页上的引用 Irungu2019 在输入行 xx 上未定义
有未定义的引用
我希望你们中的一个能够帮助我！
干杯！
@article{Irungu2019,
abstract = {A composite blend consisting of sunflower cake, maize germ, wheat bran, fresh water shrimps and cassava flour was extruded using a single-screw extruder to produce expanded fish feed pellets. The effects of temperature (80–120 °C), die diameter (2–4 mm), and feed pre-conditioning time (50–150 s; steam 400 kPa) on properties of the pellets (expansion ratio, bulk density, floatability, durability, water absorption, water solubility, water stability, and in-vitro protein digestibility) were investigated using response surface methodology. Regression equations describing the effect of each variable on the product responses were obtained. The pellets extruded using a factor combination of 120 °C extruder barrel temperature, 2 mm die diameter, and 100 s of feed pre-conditioning time gave most desirable pellet floatability (100{\%}), durability index (99{\%}), expansion ratio (2.64), water absorption index (4.12), water solubility index (9.31), water stability (87{\%}), bulk density (479 g/L), and in vitro protein digestibility (69.97{\%}) with a composite desirability of 0.88. Practical applications: Extrusion is a modern feed processing method whose use is fast gaining popularity among small feed processors in developing countries. However, extrusion is a process that involves many parameters that need to be optimized for desirable end properties. These findings guide fish feed manufacturers on the optimum conditions for single screw extruders for production of feeds with desirable properties especially for the fish types that are top feeders. In addition, the results offer important insights on how temperature, die diameter, and feed pre-conditioning, may be manipulated to influence properties of extruded aquafeed when using simple low-cost small-scale extruders.},
author = {Irungu, Francis Gichuho and Mutungi, Christopher and Faraj, Abdul and Affognon, Hippolyte and Ekesi, Sunday and Nakimbugwe, Dorothy and Fiaboe, Komi K.M.},
doi = {10.1111/jfpe.12980},
file = {:L$\backslash$:/Marjanne/ScientificArticles/Irungu2019.pdf:pdf},
issn = {17454530},
journal = {Journal of Food Process Engineering},
number = {2},
pages = {1--12},
title = {{Optimization of extruder cooking conditions for the manufacture of fish feeds using response surface methodology}},
volume = {42},
year = {2019}
}
\documentclass[10pt,a4paper]{article}
\usepackage{etoolbox}
\usepackage{mathpazo}
\renewcommand{\sfdefault}{lmss}
\renewcommand{\ttdefault}{lmtt}
\usepackage{geometry}
\usepackage[usenames,dvipsnames]{xcolor}
% \geometry{verbose,tmargin=2cm,bmargin=2cm,lmargin=2.5cm,rmargin=2.5cm}
\geometry{verbose,tmargin=2cm,bmargin=2cm,lmargin=2.5cm,rmargin=2.5cm}
\usepackage[margin=10pt,font=small,labelfont=bf,labelsep=colon]{caption}
\usepackage{amstext}
%% \usepackage{esint}
\usepackage[english]{babel}
\usepackage{eurosym}
\usepackage{booktabs}
\usepackage[parfill]{parskip}
\usepackage[round]{natbib}
%\usepackage{caption}
\usepackage{pdfpages}
\usepackage[figuresright]{rotating}
\usepackage{longtable}
\usepackage[version=4]{mhchem}
\usepackage{todonotes}
\usepackage{hyperref}
\usepackage{subfig}
\usepackage{array}
\usepackage{float}
\usepackage{lipsum}
\usepackage{lastpage}
\usetikzlibrary{patterns}
\usetikzlibrary{shapes.geometric}
\usepackage{textcomp}
\begin{document}
\title[Title of Document]
\begin{document}
\begin{titlepage}
\maketitle
\end{titlepage}
\section {Introduction}
Introduction is written here, but not relevant for this question.
\section {Background}
Here I write some text and refer to an article of Draganovic from 2013 \citep{Draganovic2013}. \
In another section, I would like to refer to Irungu from 2019 \citep{Irungu2019}.\
Current project will investigate the possibilities to re-evaluate Sustainable Fiber Technology's Wheat Straw Co-Product, by using it as a (partial) replacement of wheat gluten and/or starch in aquafeed. Being relatively high in lignin (20 - 40\% based on 30 - 50\% solids), the product is a potential excellent binder.
\section {Rest of the document}
Doesn't pose any significant errors.
\bibliographystyle{plainnat}
\bibliography{C://Users/Marjanne/Documents/April8/library}
\end{document}
我对这个 LaTeX 代码没有任何问题（即使我使用 Mac）：无论如何，你的代码中有几个问题：
- 标题为
\title[Title of Document] 而不是 \title{Title of Document}
- 有2个
\begin{document}:不知道是不是你复制代码的时候打错了
你确定你的.bib文件的路径是正确的吗？我建议只写 \bibliography{library} 并将 library.bib 文件放在您正在处理的 tex 文件的同一目录中。
此外，还可以查看 https://tex.stackexchange.com/ 以了解有关 Tex、LaTeX 的问题。
编辑：确保您使用
编译 tex 文件
pdflatex（或latex）bibtex pdflatex（或latex）pdflatex（或latex）
运行 第一个 pdflatex“文件”-interaction=nonstopmode
然后
比伯“文件”
再一次
pdflatex“文件”-interaction=nonstopmode
应该可以
我正在为我的工作编写乳胶脚本，但在获取 PDF 中的参考文献时遇到了无限麻烦。我的代码如下所示，我在 RStudio 上使用 MikTex 2.9。一些可能相关的背景信息：
- 我正在使用 Mendeley 作为我的参考资料，我已经正确设置（看起来）以启用 bibtex 同步
- .bib文件对我来说似乎并不陌生（下面添加了Irungu）
- 我使用的脚本与我的同事完全相同（除了引用我文章的路径不同），而且他们将其编译成 pdf 没有任何问题。
- 关于引用的错误是： 第 1 页上的引用 Draganovic2013 在输入行 xx 上未定义 第 1 页上的引用 Irungu2019 在输入行 xx 上未定义 有未定义的引用
我希望你们中的一个能够帮助我！ 干杯！
@article{Irungu2019,
abstract = {A composite blend consisting of sunflower cake, maize germ, wheat bran, fresh water shrimps and cassava flour was extruded using a single-screw extruder to produce expanded fish feed pellets. The effects of temperature (80–120 °C), die diameter (2–4 mm), and feed pre-conditioning time (50–150 s; steam 400 kPa) on properties of the pellets (expansion ratio, bulk density, floatability, durability, water absorption, water solubility, water stability, and in-vitro protein digestibility) were investigated using response surface methodology. Regression equations describing the effect of each variable on the product responses were obtained. The pellets extruded using a factor combination of 120 °C extruder barrel temperature, 2 mm die diameter, and 100 s of feed pre-conditioning time gave most desirable pellet floatability (100{\%}), durability index (99{\%}), expansion ratio (2.64), water absorption index (4.12), water solubility index (9.31), water stability (87{\%}), bulk density (479 g/L), and in vitro protein digestibility (69.97{\%}) with a composite desirability of 0.88. Practical applications: Extrusion is a modern feed processing method whose use is fast gaining popularity among small feed processors in developing countries. However, extrusion is a process that involves many parameters that need to be optimized for desirable end properties. These findings guide fish feed manufacturers on the optimum conditions for single screw extruders for production of feeds with desirable properties especially for the fish types that are top feeders. In addition, the results offer important insights on how temperature, die diameter, and feed pre-conditioning, may be manipulated to influence properties of extruded aquafeed when using simple low-cost small-scale extruders.},
author = {Irungu, Francis Gichuho and Mutungi, Christopher and Faraj, Abdul and Affognon, Hippolyte and Ekesi, Sunday and Nakimbugwe, Dorothy and Fiaboe, Komi K.M.},
doi = {10.1111/jfpe.12980},
file = {:L$\backslash$:/Marjanne/ScientificArticles/Irungu2019.pdf:pdf},
issn = {17454530},
journal = {Journal of Food Process Engineering},
number = {2},
pages = {1--12},
title = {{Optimization of extruder cooking conditions for the manufacture of fish feeds using response surface methodology}},
volume = {42},
year = {2019}
}
\documentclass[10pt,a4paper]{article}
\usepackage{etoolbox}
\usepackage{mathpazo}
\renewcommand{\sfdefault}{lmss}
\renewcommand{\ttdefault}{lmtt}
\usepackage{geometry}
\usepackage[usenames,dvipsnames]{xcolor}
% \geometry{verbose,tmargin=2cm,bmargin=2cm,lmargin=2.5cm,rmargin=2.5cm}
\geometry{verbose,tmargin=2cm,bmargin=2cm,lmargin=2.5cm,rmargin=2.5cm}
\usepackage[margin=10pt,font=small,labelfont=bf,labelsep=colon]{caption}
\usepackage{amstext}
%% \usepackage{esint}
\usepackage[english]{babel}
\usepackage{eurosym}
\usepackage{booktabs}
\usepackage[parfill]{parskip}
\usepackage[round]{natbib}
%\usepackage{caption}
\usepackage{pdfpages}
\usepackage[figuresright]{rotating}
\usepackage{longtable}
\usepackage[version=4]{mhchem}
\usepackage{todonotes}
\usepackage{hyperref}
\usepackage{subfig}
\usepackage{array}
\usepackage{float}
\usepackage{lipsum}
\usepackage{lastpage}
\usetikzlibrary{patterns}
\usetikzlibrary{shapes.geometric}
\usepackage{textcomp}
\begin{document}
\title[Title of Document]
\begin{document}
\begin{titlepage}
\maketitle
\end{titlepage}
\section {Introduction}
Introduction is written here, but not relevant for this question.
\section {Background}
Here I write some text and refer to an article of Draganovic from 2013 \citep{Draganovic2013}. \
In another section, I would like to refer to Irungu from 2019 \citep{Irungu2019}.\
Current project will investigate the possibilities to re-evaluate Sustainable Fiber Technology's Wheat Straw Co-Product, by using it as a (partial) replacement of wheat gluten and/or starch in aquafeed. Being relatively high in lignin (20 - 40\% based on 30 - 50\% solids), the product is a potential excellent binder.
\section {Rest of the document}
Doesn't pose any significant errors.
\bibliographystyle{plainnat}
\bibliography{C://Users/Marjanne/Documents/April8/library}
\end{document}
我对这个 LaTeX 代码没有任何问题（即使我使用 Mac）：无论如何，你的代码中有几个问题：
- 标题为
\title[Title of Document]而不是\title{Title of Document} - 有2个
\begin{document}:不知道是不是你复制代码的时候打错了
你确定你的.bib文件的路径是正确的吗？我建议只写 \bibliography{library} 并将 library.bib 文件放在您正在处理的 tex 文件的同一目录中。
此外，还可以查看 https://tex.stackexchange.com/ 以了解有关 Tex、LaTeX 的问题。
编辑：确保您使用
编译tex 文件
pdflatex（或latex）bibtexpdflatex（或latex）pdflatex（或latex）
运行 第一个 pdflatex“文件”-interaction=nonstopmode 然后 比伯“文件” 再一次 pdflatex“文件”-interaction=nonstopmode
应该可以