如何在 gitpod 中导入 pygame?
How to import pygame in gitpod?
这是一个简单的数独求解器应用程序。
一切正常。但是当我尝试在 gitpod 中 运行 它无法导入 pygame.
Error:
gitpod /workspace/SudokuVizualizationBacktracking $ /home/gitpod/.pyenv/versions/3.8.2/bin/python /workspace/SudokuVizualizationBacktracking/GUI.py
Traceback (most recent call last):
File "/workspace/SudokuVizualizationBacktracking/GUI.py", line 1, in <module>
import pygame
ModuleNotFoundError: No module named 'pygame'
你能帮帮我吗?谢谢你。
在你的 .gitpod.yml
you have configured the following init task:
$ pip3 install -r requirements.txt
通过在终端中打开 https://gitpod.io/#https://github.com/Deepak-dash007/SudokuVizualizationBacktracking 和 运行 此命令来启动您的工作区。您将获得以下输出:
$ pip3 install -r requirements.txt
Collecting pygame
Downloading pygame-1.9.6.tar.gz (3.2 MB)
|████████████████████████████████| 3.2 MB 6.8 MB/s
ERROR: Command errored out with exit status 1:
command: /home/gitpod/.pyenv/versions/3.8.2/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-fgexue3e/pygame/setup.py'"'"'; __file__='"'"'/tmp/pip-install-fgexue3e/pygame/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-9lyba20o
cwd: /tmp/pip-install-fgexue3e/pygame/
Complete output (12 lines):
WARNING, No "Setup" File Exists, Running "buildconfig/config.py"
Using UNIX configuration...
/bin/sh: 1: sdl-config: not found
/bin/sh: 1: sdl-config: not found
/bin/sh: 1: sdl-config: not found
Hunting dependencies...
WARNING: "sdl-config" failed!
Unable to run "sdl-config". Please make sure a development version of SDL is installed.
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
在这里你可以看到 sdl-config
不见了。 Google 找到了这个 Stack Overflow 答案,其中列出了 pygame
所需的依赖项:
将 .gitpod.yml
中的 image
配置更改为:
image:
file: .gitpod.Dockerfile
并添加了一个新文件 .gitpod.Dockerfile
,用于安装其他 Stack Overflow post 中链接的依赖项:
FROM gitpod/workspace-full-vnc
RUN sudo apt-get update && sudo apt-get install -y \
python-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev libsdl1.2-dev libsmpeg-dev python-numpy subversion libportmidi-dev ffmpeg libswscale-dev libavformat-dev libavcodec-dev
推送所有内容并创建一个新的 Gitpod 工作区。就是这样。
您会在此处找到 运行ning 存储库 https://github.com/corneliusludmann/SudokuVizualizationBacktracking
我还为您创建了一个 Pull Request:https://github.com/Deepak-dash007/SudokuVizualizationBacktracking/pull/1
这是一个简单的数独求解器应用程序。
一切正常。但是当我尝试在 gitpod 中 运行 它无法导入 pygame.
Error:
gitpod /workspace/SudokuVizualizationBacktracking $ /home/gitpod/.pyenv/versions/3.8.2/bin/python /workspace/SudokuVizualizationBacktracking/GUI.py
Traceback (most recent call last):
File "/workspace/SudokuVizualizationBacktracking/GUI.py", line 1, in <module>
import pygame
ModuleNotFoundError: No module named 'pygame'
你能帮帮我吗?谢谢你。
在你的 .gitpod.yml
you have configured the following init task:
$ pip3 install -r requirements.txt
通过在终端中打开 https://gitpod.io/#https://github.com/Deepak-dash007/SudokuVizualizationBacktracking 和 运行 此命令来启动您的工作区。您将获得以下输出:
$ pip3 install -r requirements.txt
Collecting pygame
Downloading pygame-1.9.6.tar.gz (3.2 MB)
|████████████████████████████████| 3.2 MB 6.8 MB/s
ERROR: Command errored out with exit status 1:
command: /home/gitpod/.pyenv/versions/3.8.2/bin/python3 -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-fgexue3e/pygame/setup.py'"'"'; __file__='"'"'/tmp/pip-install-fgexue3e/pygame/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base /tmp/pip-pip-egg-info-9lyba20o
cwd: /tmp/pip-install-fgexue3e/pygame/
Complete output (12 lines):
WARNING, No "Setup" File Exists, Running "buildconfig/config.py"
Using UNIX configuration...
/bin/sh: 1: sdl-config: not found
/bin/sh: 1: sdl-config: not found
/bin/sh: 1: sdl-config: not found
Hunting dependencies...
WARNING: "sdl-config" failed!
Unable to run "sdl-config". Please make sure a development version of SDL is installed.
----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
在这里你可以看到 sdl-config
不见了。 Google 找到了这个 Stack Overflow 答案,其中列出了 pygame
所需的依赖项:
将 .gitpod.yml
中的 image
配置更改为:
image:
file: .gitpod.Dockerfile
并添加了一个新文件 .gitpod.Dockerfile
,用于安装其他 Stack Overflow post 中链接的依赖项:
FROM gitpod/workspace-full-vnc
RUN sudo apt-get update && sudo apt-get install -y \
python-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev libsdl1.2-dev libsmpeg-dev python-numpy subversion libportmidi-dev ffmpeg libswscale-dev libavformat-dev libavcodec-dev
推送所有内容并创建一个新的 Gitpod 工作区。就是这样。
您会在此处找到 运行ning 存储库 https://github.com/corneliusludmann/SudokuVizualizationBacktracking
我还为您创建了一个 Pull Request:https://github.com/Deepak-dash007/SudokuVizualizationBacktracking/pull/1