Pentaho Spoon 转换抛出：ORA-01652：无法在表空间 TEMP 中将临时段扩展 128
Pentaho Spoon transformation throws: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
嘿，我正在用 Pentaho Spoon 做一个简单的转换，转换有两个步骤：
输入 table: 我使用 SQL 从 Oracle 11g 数据库中提取数据。
Excel 输出： 我将数据库中的数据写入 excel 文件。
问题是当我尝试 运行 这 2 步转换时，没有任何反应。我试图可视化第一步中的前 200 个条目，但抛出以下错误：
ORA-01652: 无法将 tablespace TEMP 中的临时段扩展 128。
这就是转换不起作用的原因吗？考虑到我没有数据库管理员权限来增加 TEMP table空间大小，我该如何解决它。
这些是登录消息：
输入table方法中使用的查询如下：
SELECT
ptn.ptnID,
ptn.ptnNAME,
ptn.ptnSURNAME,
ptn.SSN,
ptn.EXTERNALID,
ptn.NTS,
ptn.GENDER,
ptn.DOB,
ptn.ADDRESS,
ptn.CITY,
ptn.STATE,
ptn.COUNTRY,
ptn.POSTALCODE,
ptn.ACTIVE,
ptn.NACIONALITY,
ptn.COUNTRYOFBIRTH,
ptn.EXITUS,
ptn.ptnFIRSTSURNAME,
ptn.ptnSECONDSURNAME,
ptn.DEATHDATE,
appl.applID,
srv.srvDESCRIPTION,
center.CENTERDESCRIPTION,
appl.applLABEL,
appl.applDATE,
appl.COMPLETEDATE,
container.COMMENTS,
sample.SAMPLEDESCRIPTION,
test.TESTDESCRIPTION,
test.UNITSCS,
rslhst.RESULTSTATUS,
rslhst.ISAUTOMATIC,
pathology.PATHOLOGYDESCRIPTION,
FROM USRGR.APPLICATION appl
LEFT OUTER JOIN USRGR.PTN ptn on ptn.ptnid = appl.ptnid
LEFT OUTER JOIN USRGR.APPLICATIONTEST appltest on appltest.ptnid = appl.ptnid
LEFT OUTER JOIN USRGR.TEST test on test.testid = appltest.testid
LEFT OUTER JOIN USRGR.RSLHST rslhst on (rslhst.applid = appltest.applid) AND (rslhst.testid = appltest.testid)
LEFT OUTER JOIN USRGR.CONTAINER container on container.containerid = rslhst.containerid
LEFT OUTER JOIN USRGR.DOC doc on doc.docid = appl.docid
LEFT OUTER JOIN USRGR.SRV srv on srv.srvid = appl.srvid
LEFT OUTER JOIN USRGR.CENTER center on center.centerid = srv.centerid
LEFT OUTER JOIN USRGR.SAMPLE sample on sample.sampleid = container.sampleid
LEFT OUTER JOIN USRGR.CLTRISOL cltrisol on cltrisol.applid = rslhst.applid
LEFT OUTER JOIN USRGR.ISL isl on isl.islid = cltrisol.islid
LEFT OUTER JOIN USRGR.PATHOLOGY on pathology.pathologyid = rslhst.pathology
LEFT OUTER JOIN USRGR.COD cod on cod.codsfamilyid = rslhst.codsfamilyid AND rslhst.shortdescription1 = cod.shortdescription
LEFT OUTER JOIN USRGR.INTERVALS intervals on intervals.testid = test.testid AND intervals.methodid = rslhst.methodid
WHERE
appl.orderdate BETWEEN '01/01/19' AND '02/01/19' AND
rslhst.isfinal = 'Y' AND
appl.iscomplete = 'Y' AND
((to_number(to_char(appl.ORDERDATE, 'YYYY')) - to_number(to_char(ptn.DOB, 'YYYY'))) * 12 * 12 >= intervals.from) AND
((to_number(to_char(appl.ORDERDATE, 'YYYY')) - to_number(to_char(ptn.DOB, 'YYYY'))) * 12 * 12 < intervals.to) AND
test.testid in (
5, 5261,
435, 438,
5014, 3986, 3987,
4293, 6017, 2295, 2296, 2298,
196, 199, 218, 219, 1626, 3861, 5275, 5276
);
解释计划输出：
"PLAN_TABLE_OUTPUT"
"Plan hash value: 3813514414"
" "
"-------------------------------------------------------------------------------"
"| Id | Operation | Name | Rows | Bytes |TempSpc| Cost | "
"-------------------------------------------------------------------------------"
"| 0 | SELECT STATEMENT | | 319K| 497M| | 1508K|"
"|* 1 | FILTER | | | | | |"
"|* 2 | HASH JOIN OUTER | | 319K| 497M| 494M| 1508K|"
"| 3 | VIEW | | 319K| 490M| | 1500K|"
"|* 4 | FILTER | | | | | |"
"|* 5 | HASH JOIN OUTER| | 319K| 172M| 148M| 1500K|"
"|* 6 | HASH JOIN OUTER| | 319K| 145M| 140M| 1491K|"
"|* 7 | HASH JOIN OUTER| | 319K| 137M| 116M| 1489K|"
"|* 8 | HASH JOIN OUTER| | 319K| 112M| 105M| 1487K|"
"|* 9 | HASH JOIN OUTER| | 319K| 101M| 88M| 1485K|"
"|* 10 | HASH JOIN OUTER| | 284K| 85M| 79M| 1483K|"
"|* 11 | HASH JOIN OUTER| | 284K| 76M| 74M| 1482K|"
"|* 12 | HASH JOIN| | 284K| 71M| 148M| 1481K|"
"|* 13 | FILTER| | | | | |"
"|* 14 | HASH JOIN OUTER| | 669K| 141M| 121M| 89111 |"
"| 15 | NESTED LOOPS OUTER| | 669K| 114M| | 87134 |"
"|* 16 | HASH JOIN OUTER| | 1616 | 257K| | 22494 |"
"|* 17 | HASH JOIN OUTER| | 1616 | 211K| | 22479 |"
"|* 18 | HASH JOIN OUTER| | 1616 | 173K| | 22474 |"
"|* 19 | TABLE ACCESS FULL| APPLICATION | 1616 | 123K| | 22469 |"
"| 20 | TABLE ACCESS FULL| SERVICE | 292 | 9344 | | 3 |"
"| 21 | TABLE ACCESS FULL| CENTER | 16 | 384 | | 3 |"
"| 22 | TABLE ACCESS FULL| DOC | 7154 | 202K| | 12 |"
"| 23 |TABLE ACCESS BY INDEX ROWID| APPLICATIONTEST|414 | 6624 | | 40 |"
"|* 24 |INDEX RANGE SCAN| RQTEST_PTNID_IDX | 414 | | | 3 |"
"| 25 |TABLE ACCESS FULL | TEST | 4292 | 176K| | 31 |"
"|* 26 |TABLE ACCESS FULL | RSLHST | 187M| 7686M| | 1233K|"
"| 27 |TABLE ACCESS FULL | PATHOLOGY | 45 | 720 | | 3 |"
"| 28 |TABLE ACCESS FULL | COD | 4289 | 142K| | 14 |"
"| 29 |TABLE ACCESS FULL | CLTRISOL | 212K| 4144K| | 505 |"
"| 30 |TABLE ACCESS FULL | ISL | 2303 | 80605 | | 6 |"
"| 31 |TABLE ACCESS FULL | CONTAINER | 674 | 53920 | | 5 |"
"| 32 |TABLE ACCESS FULL | SAMPLE | 354 | 9558 | | 2 |"
"| 33 |TABLE ACCESS FULL | PTN | 1886K| 160M| | 3887 |"
"| 34 |TABLE ACCESS FULL | MARGINS | 2232 | 49104 | | 8 |"
"-------------------------------------------------------------------------------"
转换正在为需要 TEMP space 的连接执行排序或创建临时数据集。根据您的转换和查询的解释计划，如果转换必须在应用过滤器之前处理所有源数据，那么即使您限制返回的行数也可能无关紧要。很可能要达到 运行 的唯一方法是增加 TEMP tablespace 的大小。您将需要与您的 DBA 一起确认这一点并制定解决方案。
嘿，我正在用 Pentaho Spoon 做一个简单的转换，转换有两个步骤：
输入 table: 我使用 SQL 从 Oracle 11g 数据库中提取数据。
Excel 输出： 我将数据库中的数据写入 excel 文件。
问题是当我尝试 运行 这 2 步转换时，没有任何反应。我试图可视化第一步中的前 200 个条目，但抛出以下错误：
ORA-01652: 无法将 tablespace TEMP 中的临时段扩展 128。
这就是转换不起作用的原因吗？考虑到我没有数据库管理员权限来增加 TEMP table空间大小，我该如何解决它。
这些是登录消息：
输入table方法中使用的查询如下：
SELECT
ptn.ptnID,
ptn.ptnNAME,
ptn.ptnSURNAME,
ptn.SSN,
ptn.EXTERNALID,
ptn.NTS,
ptn.GENDER,
ptn.DOB,
ptn.ADDRESS,
ptn.CITY,
ptn.STATE,
ptn.COUNTRY,
ptn.POSTALCODE,
ptn.ACTIVE,
ptn.NACIONALITY,
ptn.COUNTRYOFBIRTH,
ptn.EXITUS,
ptn.ptnFIRSTSURNAME,
ptn.ptnSECONDSURNAME,
ptn.DEATHDATE,
appl.applID,
srv.srvDESCRIPTION,
center.CENTERDESCRIPTION,
appl.applLABEL,
appl.applDATE,
appl.COMPLETEDATE,
container.COMMENTS,
sample.SAMPLEDESCRIPTION,
test.TESTDESCRIPTION,
test.UNITSCS,
rslhst.RESULTSTATUS,
rslhst.ISAUTOMATIC,
pathology.PATHOLOGYDESCRIPTION,
FROM USRGR.APPLICATION appl
LEFT OUTER JOIN USRGR.PTN ptn on ptn.ptnid = appl.ptnid
LEFT OUTER JOIN USRGR.APPLICATIONTEST appltest on appltest.ptnid = appl.ptnid
LEFT OUTER JOIN USRGR.TEST test on test.testid = appltest.testid
LEFT OUTER JOIN USRGR.RSLHST rslhst on (rslhst.applid = appltest.applid) AND (rslhst.testid = appltest.testid)
LEFT OUTER JOIN USRGR.CONTAINER container on container.containerid = rslhst.containerid
LEFT OUTER JOIN USRGR.DOC doc on doc.docid = appl.docid
LEFT OUTER JOIN USRGR.SRV srv on srv.srvid = appl.srvid
LEFT OUTER JOIN USRGR.CENTER center on center.centerid = srv.centerid
LEFT OUTER JOIN USRGR.SAMPLE sample on sample.sampleid = container.sampleid
LEFT OUTER JOIN USRGR.CLTRISOL cltrisol on cltrisol.applid = rslhst.applid
LEFT OUTER JOIN USRGR.ISL isl on isl.islid = cltrisol.islid
LEFT OUTER JOIN USRGR.PATHOLOGY on pathology.pathologyid = rslhst.pathology
LEFT OUTER JOIN USRGR.COD cod on cod.codsfamilyid = rslhst.codsfamilyid AND rslhst.shortdescription1 = cod.shortdescription
LEFT OUTER JOIN USRGR.INTERVALS intervals on intervals.testid = test.testid AND intervals.methodid = rslhst.methodid
WHERE
appl.orderdate BETWEEN '01/01/19' AND '02/01/19' AND
rslhst.isfinal = 'Y' AND
appl.iscomplete = 'Y' AND
((to_number(to_char(appl.ORDERDATE, 'YYYY')) - to_number(to_char(ptn.DOB, 'YYYY'))) * 12 * 12 >= intervals.from) AND
((to_number(to_char(appl.ORDERDATE, 'YYYY')) - to_number(to_char(ptn.DOB, 'YYYY'))) * 12 * 12 < intervals.to) AND
test.testid in (
5, 5261,
435, 438,
5014, 3986, 3987,
4293, 6017, 2295, 2296, 2298,
196, 199, 218, 219, 1626, 3861, 5275, 5276
);
解释计划输出：
"PLAN_TABLE_OUTPUT"
"Plan hash value: 3813514414"
" "
"-------------------------------------------------------------------------------"
"| Id | Operation | Name | Rows | Bytes |TempSpc| Cost | "
"-------------------------------------------------------------------------------"
"| 0 | SELECT STATEMENT | | 319K| 497M| | 1508K|"
"|* 1 | FILTER | | | | | |"
"|* 2 | HASH JOIN OUTER | | 319K| 497M| 494M| 1508K|"
"| 3 | VIEW | | 319K| 490M| | 1500K|"
"|* 4 | FILTER | | | | | |"
"|* 5 | HASH JOIN OUTER| | 319K| 172M| 148M| 1500K|"
"|* 6 | HASH JOIN OUTER| | 319K| 145M| 140M| 1491K|"
"|* 7 | HASH JOIN OUTER| | 319K| 137M| 116M| 1489K|"
"|* 8 | HASH JOIN OUTER| | 319K| 112M| 105M| 1487K|"
"|* 9 | HASH JOIN OUTER| | 319K| 101M| 88M| 1485K|"
"|* 10 | HASH JOIN OUTER| | 284K| 85M| 79M| 1483K|"
"|* 11 | HASH JOIN OUTER| | 284K| 76M| 74M| 1482K|"
"|* 12 | HASH JOIN| | 284K| 71M| 148M| 1481K|"
"|* 13 | FILTER| | | | | |"
"|* 14 | HASH JOIN OUTER| | 669K| 141M| 121M| 89111 |"
"| 15 | NESTED LOOPS OUTER| | 669K| 114M| | 87134 |"
"|* 16 | HASH JOIN OUTER| | 1616 | 257K| | 22494 |"
"|* 17 | HASH JOIN OUTER| | 1616 | 211K| | 22479 |"
"|* 18 | HASH JOIN OUTER| | 1616 | 173K| | 22474 |"
"|* 19 | TABLE ACCESS FULL| APPLICATION | 1616 | 123K| | 22469 |"
"| 20 | TABLE ACCESS FULL| SERVICE | 292 | 9344 | | 3 |"
"| 21 | TABLE ACCESS FULL| CENTER | 16 | 384 | | 3 |"
"| 22 | TABLE ACCESS FULL| DOC | 7154 | 202K| | 12 |"
"| 23 |TABLE ACCESS BY INDEX ROWID| APPLICATIONTEST|414 | 6624 | | 40 |"
"|* 24 |INDEX RANGE SCAN| RQTEST_PTNID_IDX | 414 | | | 3 |"
"| 25 |TABLE ACCESS FULL | TEST | 4292 | 176K| | 31 |"
"|* 26 |TABLE ACCESS FULL | RSLHST | 187M| 7686M| | 1233K|"
"| 27 |TABLE ACCESS FULL | PATHOLOGY | 45 | 720 | | 3 |"
"| 28 |TABLE ACCESS FULL | COD | 4289 | 142K| | 14 |"
"| 29 |TABLE ACCESS FULL | CLTRISOL | 212K| 4144K| | 505 |"
"| 30 |TABLE ACCESS FULL | ISL | 2303 | 80605 | | 6 |"
"| 31 |TABLE ACCESS FULL | CONTAINER | 674 | 53920 | | 5 |"
"| 32 |TABLE ACCESS FULL | SAMPLE | 354 | 9558 | | 2 |"
"| 33 |TABLE ACCESS FULL | PTN | 1886K| 160M| | 3887 |"
"| 34 |TABLE ACCESS FULL | MARGINS | 2232 | 49104 | | 8 |"
"-------------------------------------------------------------------------------"
转换正在为需要 TEMP space 的连接执行排序或创建临时数据集。根据您的转换和查询的解释计划，如果转换必须在应用过滤器之前处理所有源数据，那么即使您限制返回的行数也可能无关紧要。很可能要达到 运行 的唯一方法是增加 TEMP tablespace 的大小。您将需要与您的 DBA 一起确认这一点并制定解决方案。