如何使用 Arduino 在 NodeMcu 中从 URL 获取实时数据？

Question

问题陈述 我希望我的 NodeMCU 每次循环都从 URL 获取最新的更新数据。目前它不更新获取的内容。

例如，Link: http://abcdxyz.xyz/io.php 只有数字 223838。一旦 NodeMCU 启动运行，link 的信息就会更新为 240000，然而，即使 link 在服务器上更新后，Arduino 串行打印机仍显示 223838。

这是我的代码：

#include "ESP8266WiFi.h"
#include <ESP8266HTTPClient.h>
#include <WiFiClient.h>
# define LED D4 // Use built-in LED which connected to D4 pin or GPIO 2

String serverName = "http://abcdxyz.xyz/";
unsigned long timerDelay = 5000;
unsigned long lastTime = 0;


// WiFi parameters to be configured
const char* ssid = "XXXXXXXXX";
const char* password = "XXXXXXXXXX";


void setup() {
  pinMode(LED, OUTPUT);     // Initialize the LED as an output
  Serial.begin(9600);
  // Connect to WiFi
  WiFi.begin(ssid, password);

  // while wifi not connected yet, print '.'
  // then after it connected, get out of the loop
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  //print a new line, then print WiFi connected and the IP address
  Serial.println("");
  Serial.println("WiFi connected");
  // Print the IP address
  Serial.println(WiFi.localIP());

}

void loop() {

  //Calling An URL FOR DATA


   if ((WiFi.status() == WL_CONNECTED)) { //Check the current connection status
 
    HTTPClient http;
 
    http.begin("http://abcdxyz.xyz/io.php"); //Specify the URL
    int httpCode = http.GET();                                        //Make the request
 
    if (httpCode > 0) { //Check for the returning code
 
        String payload = http.getString();
        Serial.println(httpCode);
        Serial.println(payload);
      }
 
    else {
      Serial.println("Error on HTTP request");
    }
 
    http.end(); //Free the resources
  }
 
  delay(1000);

  //Calling URL ENDS
digitalWrite(LED, HIGH);
delay(100);
digitalWrite(LED, LOW);

}

Answer 1

想通了。每次 link 必须是新的 link 才能获取最新记录。请遵循以下代码：

void loop() {

  //Calling An URL FOR DATA


   if ((WiFi.status() == WL_CONNECTED)) { //Check the current connection status
 
    HTTPClient http;
 randNumber = random(1, 99999);

 String crow = "http://abcdxyz.xyz/io.php?tag=";
 crow += randNumber;
 Serial.println(crow);


http.begin(crow); //Specify the URL

    int httpCode = http.GET();     //Make the request
 
    if (httpCode > 0) { //Check for the returning code
 
        String payload = http.getString();
        Serial.println(httpCode);
        Serial.println(payload);
      }
 
    else {
      Serial.println("Error on HTTP request");
    }
 
    http.end(); //Free the resources
  }
 
  delay(1000);

  //Calling URL ENDS
digitalWrite(LED, HIGH);
delay(100);
digitalWrite(LED, LOW);

}

如何使用 Arduino 在 NodeMcu 中从 URL 获取实时数据？

How to fetch Real-Time data from URL in NodeMcu using Arduino?

arduino

nodemcu

esp8266

arduino-esp8266

esp8266wifi