即使安装了软件包，repoquery 也不会输出任何软件包 (yum-utils)
repoquery gives no output for a package even though the package is installed (yum-utils)
参考。现有问题 How to list the contents of a package using YUM? 及其答案。
如下所示，repoquery（来自 yum-utils 包）没有给出包的输出，即使包已安装。事实上，有问题的包是 yum-utils，repoquery 就是从那里来的！ （但请注意，它也没有为其他包提供输出 - 显示了一个示例。）
有人知道为什么会这样吗？其他人有同样的问题吗？
问题如下...
yum-utils 包中的 repoquery 命令似乎没有按预期工作。见下文。安装了 yum-utils 包，然后可以使用 repoquery 命令，但它没有列出它来自的包的内容，尽管它确实列出了我随机选择的另一个包的内容。
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ re
read readonly regdbdump reset restorecon
readarray readprofile reload resize2fs restorecond
readelf reboot rename resizecons return
readlink refer renice restart rev
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo yum install yum-utils
Loaded plugins: product-id, rhnplugin, subscription-manager
Updating certificate-based repositories.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package yum-utils.noarch 0:1.1.30-30.el6 will be installed
--> Processing Dependency: yum >= 3.2.29-56 for package: yum-utils-1.1.30-30.el6 .noarch
--> Running transaction check
---> Package yum.noarch 0:3.2.29-22.el6 will be updated
---> Package yum.noarch 0:3.2.29-60.el6 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
yum-utils noarch 1.1.30-30.el6 rhel-x86_64-server-6 110 k
Updating for dependencies:
yum noarch 3.2.29-60.el6 rhel-x86_64-server-6 1.0 M
Transaction Summary
================================================================================
Install 1 Package(s)
Upgrade 1 Package(s)
Total download size: 1.1 M
Is this ok [y/N]: y
Downloading Packages:
(1/2): yum-3.2.29-60.el6.noarch.rpm | 1.0 MB 00:00
(2/2): yum-utils-1.1.30-30.el6.noarch.rpm | 110 kB 00:00
--------------------------------------------------------------------------------
Total 619 kB/s | 1.1 MB 00:01
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : yum-3.2.29-60.el6.noarch 1/3
Installing : yum-utils-1.1.30-30.el6.noarch 2/3
Cleanup : yum-3.2.29-22.el6.noarch 3/3
Installed products updated.
Installed:
yum-utils.noarch 0:1.1.30-30.el6
Dependency Updated:
yum.noarch 0:3.2.29-60.el6
Complete!
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ repo
repoclosure repo-graph repoquery reposync
repodiff repomanage repo-rss repotrack
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list freeradius
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list yum-utils # NOTE NO OUTPUT HERE
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo rpm -qa | head
[sudo] password for jgilmartin:
ruby-libs-1.8.7.352-10.el6_4.x86_64
basesystem-10.0-4.el6.noarch
ruby-shadow-1.4.1-13.el6.x86_64
openssh-clients-5.3p1-94.el6.x86_64
s3cmd-1.0.1-1.el6.noarch
info-4.13a-8.el6.x86_64
procmail-3.22-25.1.el6.x86_64
libcom_err-1.41.12-11.el6.x86_64
dbus-1.2.24-7.el6_3.x86_64
libsepol-2.0.41-4.el6.x86_64
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list s3cmd | head # WORKS FOR THIS PACKAGE
/usr/bin/s3cmd
/usr/lib/python2.6/site-packages/S3/ACL.py
/usr/lib/python2.6/site-packages/S3/ACL.pyc
/usr/lib/python2.6/site-packages/S3/AccessLog.py
/usr/lib/python2.6/site-packages/S3/AccessLog.pyc
/usr/lib/python2.6/site-packages/S3/BidirMap.py
/usr/lib/python2.6/site-packages/S3/BidirMap.pyc
/usr/lib/python2.6/site-packages/S3/CloudFront.py
/usr/lib/python2.6/site-packages/S3/CloudFront.pyc
/usr/lib/python2.6/site-packages/S3/Config.py
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo rpm -ql yum-utils | head # rpm -ql WORKS FOR THE PACKAGE
/etc/bash_completion.d
/etc/bash_completion.d/yum-utils.bash
/usr/bin/debuginfo-install
/usr/bin/find-repos-of-install
/usr/bin/needs-restarting
/usr/bin/package-cleanup
/usr/bin/repo-graph
/usr/bin/repo-rss
/usr/bin/repoclosure
/usr/bin/repodiff
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ uname -a
Linux cnmvlmtlb01 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.2 (Santiago)
(DEV) [jgilmartin@cnmvlmtlb01 ~]$
我遇到了这个问题并通过添加选项 --pkgnarrow=installed 解决了它。
我怀疑 repoquery 在这方面有点问题。我发现有些包即使安装了也会出现，而有些则不会，除非我添加了 pkgnarrow 选项。
您也可以使用 --pkgnarrow=all。
示例：
$ sudo repoquery --repoid ix-stable boost
$ sudo repoquery --repoid ix-stable --pkgnarrow=all boost
boost-0:1.41.0-17.el6_4.x86_64
参考。现有问题 How to list the contents of a package using YUM? 及其答案。
如下所示，repoquery（来自 yum-utils 包）没有给出包的输出，即使包已安装。事实上，有问题的包是 yum-utils，repoquery 就是从那里来的！ （但请注意，它也没有为其他包提供输出 - 显示了一个示例。）
有人知道为什么会这样吗？其他人有同样的问题吗？
问题如下...
yum-utils 包中的 repoquery 命令似乎没有按预期工作。见下文。安装了 yum-utils 包，然后可以使用 repoquery 命令，但它没有列出它来自的包的内容，尽管它确实列出了我随机选择的另一个包的内容。
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ re
read readonly regdbdump reset restorecon
readarray readprofile reload resize2fs restorecond
readelf reboot rename resizecons return
readlink refer renice restart rev
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo yum install yum-utils
Loaded plugins: product-id, rhnplugin, subscription-manager
Updating certificate-based repositories.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package yum-utils.noarch 0:1.1.30-30.el6 will be installed
--> Processing Dependency: yum >= 3.2.29-56 for package: yum-utils-1.1.30-30.el6 .noarch
--> Running transaction check
---> Package yum.noarch 0:3.2.29-22.el6 will be updated
---> Package yum.noarch 0:3.2.29-60.el6 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
yum-utils noarch 1.1.30-30.el6 rhel-x86_64-server-6 110 k
Updating for dependencies:
yum noarch 3.2.29-60.el6 rhel-x86_64-server-6 1.0 M
Transaction Summary
================================================================================
Install 1 Package(s)
Upgrade 1 Package(s)
Total download size: 1.1 M
Is this ok [y/N]: y
Downloading Packages:
(1/2): yum-3.2.29-60.el6.noarch.rpm | 1.0 MB 00:00
(2/2): yum-utils-1.1.30-30.el6.noarch.rpm | 110 kB 00:00
--------------------------------------------------------------------------------
Total 619 kB/s | 1.1 MB 00:01
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : yum-3.2.29-60.el6.noarch 1/3
Installing : yum-utils-1.1.30-30.el6.noarch 2/3
Cleanup : yum-3.2.29-22.el6.noarch 3/3
Installed products updated.
Installed:
yum-utils.noarch 0:1.1.30-30.el6
Dependency Updated:
yum.noarch 0:3.2.29-60.el6
Complete!
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ repo
repoclosure repo-graph repoquery reposync
repodiff repomanage repo-rss repotrack
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list freeradius
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list yum-utils # NOTE NO OUTPUT HERE
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo rpm -qa | head
[sudo] password for jgilmartin:
ruby-libs-1.8.7.352-10.el6_4.x86_64
basesystem-10.0-4.el6.noarch
ruby-shadow-1.4.1-13.el6.x86_64
openssh-clients-5.3p1-94.el6.x86_64
s3cmd-1.0.1-1.el6.noarch
info-4.13a-8.el6.x86_64
procmail-3.22-25.1.el6.x86_64
libcom_err-1.41.12-11.el6.x86_64
dbus-1.2.24-7.el6_3.x86_64
libsepol-2.0.41-4.el6.x86_64
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo repoquery --list s3cmd | head # WORKS FOR THIS PACKAGE
/usr/bin/s3cmd
/usr/lib/python2.6/site-packages/S3/ACL.py
/usr/lib/python2.6/site-packages/S3/ACL.pyc
/usr/lib/python2.6/site-packages/S3/AccessLog.py
/usr/lib/python2.6/site-packages/S3/AccessLog.pyc
/usr/lib/python2.6/site-packages/S3/BidirMap.py
/usr/lib/python2.6/site-packages/S3/BidirMap.pyc
/usr/lib/python2.6/site-packages/S3/CloudFront.py
/usr/lib/python2.6/site-packages/S3/CloudFront.pyc
/usr/lib/python2.6/site-packages/S3/Config.py
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ sudo rpm -ql yum-utils | head # rpm -ql WORKS FOR THE PACKAGE
/etc/bash_completion.d
/etc/bash_completion.d/yum-utils.bash
/usr/bin/debuginfo-install
/usr/bin/find-repos-of-install
/usr/bin/needs-restarting
/usr/bin/package-cleanup
/usr/bin/repo-graph
/usr/bin/repo-rss
/usr/bin/repoclosure
/usr/bin/repodiff
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ uname -a
Linux cnmvlmtlb01 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
(DEV) [jgilmartin@cnmvlmtlb01 ~]$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.2 (Santiago)
(DEV) [jgilmartin@cnmvlmtlb01 ~]$
我遇到了这个问题并通过添加选项 --pkgnarrow=installed 解决了它。
我怀疑 repoquery 在这方面有点问题。我发现有些包即使安装了也会出现，而有些则不会，除非我添加了 pkgnarrow 选项。
您也可以使用 --pkgnarrow=all。
示例：
$ sudo repoquery --repoid ix-stable boost
$ sudo repoquery --repoid ix-stable --pkgnarrow=all boost
boost-0:1.41.0-17.el6_4.x86_64