PySimpleGUI 中的交互式 matplotlib 图
Interactive matplotlib plot in PySimpleGUI
我正在尝试让 RectangleSelector 表单 matplotlib.widgets 与 PySimpleGUI 一起工作。
我的测试代码基于接受的答案 on this question.
中显示的 RectangleSelector 演示
我正在 PySimpleGUI 中显示绘图，但它不是交互式的。在 PySimpleGUI 中甚至可以有交互式 matplotlib 小部件吗？
import PySimpleGUI as sg
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg
from matplotlib.widgets import RectangleSelector
import matplotlib
matplotlib.use('TkAgg')
xdata = np.linspace(0,9*np.pi, num=301)
ydata = np.sin(xdata)
fig, ax = plt.subplots()
line, = ax.plot(xdata, ydata)
def draw_figure(canvas, figure):
figure_canvas_agg = FigureCanvasTkAgg(figure, canvas)
figure_canvas_agg.draw()
figure_canvas_agg.get_tk_widget().pack(side="top", fill="both", expand=1)
return figure_canvas_agg
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
ax.add_patch(rect)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
layout = [[sg.Canvas(key="-CANVAS-")]]
window = sg.Window('test', layout, finalize=True, element_justification='center', font='Helvetica 16')
draw_figure(window["-CANVAS-"].TKCanvas, fig)
event, values = window.read()
编辑： 感谢 MikeyB 的指点，我现在有以下代码，它显示了一个交互式绘图，但仍然无法绘制矩形。回调函数似乎没有触发。新代码如下：
import PySimpleGUI as sg
import numpy as np
from matplotlib.widgets import RectangleSelector
import matplotlib.figure as figure
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg, NavigationToolbar2Tk
# instantiate matplotlib figure
fig = figure.Figure()
ax = fig.add_subplot(111)
DPI = fig.get_dpi()
fig.set_size_inches(505 * 2 / float(DPI), 707 / float(DPI))
# ------------------------------- This is to include a matplotlib figure in a Tkinter canvas
def draw_figure_w_toolbar(canvas, fig, canvas_toolbar):
if canvas.children:
for child in canvas.winfo_children():
child.destroy()
if canvas_toolbar.children:
for child in canvas_toolbar.winfo_children():
child.destroy()
figure_canvas_agg = FigureCanvasTkAgg(fig, master=canvas)
figure_canvas_agg.draw()
toolbar = Toolbar(figure_canvas_agg, canvas_toolbar)
toolbar.update()
figure_canvas_agg.get_tk_widget().pack(side='right', fill='both', expand=1)
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
print(rect)
ax.add_patch(rect)
class Toolbar(NavigationToolbar2Tk):
def __init__(self, *args, **kwargs):
super(Toolbar, self).__init__(*args, **kwargs)
# ------------------------------- PySimpleGUI CODE
layout = [
[sg.B('start', key='start')],
[sg.Canvas(key='controls_cv')],
[sg.Column(
layout=[
[sg.Canvas(key='fig_cv',
# it's important that you set this size
size=(500 * 2, 700)
)]
],
background_color='#DAE0E6',
pad=(0, 0)
)],
]
window = sg.Window('Test', layout)
while True:
event, values = window.read()
print(event, values)
if event == sg.WIN_CLOSED:
break
elif event == 'start':
x = np.linspace(0, 2 * np.pi)
y = np.sin(x)
line, = ax.plot(x, y)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
draw_figure_w_toolbar(window['fig_cv'].TKCanvas, fig, window['controls_cv'].TKCanvas)
window.close()
Is it even possible in PySimpleGUI to have interactive matplotlib widgets?
是的。
项目GitHub上的演示程序演示了如何制作交互式 Matplotlib 绘图。
您需要将控件嵌入到 window。
你需要添加
fig.canvas.draw()
如果您希望在触发回调后更新绘图，请添加到您的回调函数！
这是您的代码的更新版本，运行良好：
import PySimpleGUI as sg
import numpy as np
from matplotlib.widgets import RectangleSelector
import matplotlib.figure as figure
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg, NavigationToolbar2Tk
import matplotlib.pyplot as plt
# instantiate matplotlib figure
fig = figure.Figure()
ax = fig.add_subplot(111)
DPI = fig.get_dpi()
fig.set_size_inches(505 * 2 / float(DPI), 707 / float(DPI))
# ------------------------------- This is to include a matplotlib figure in a Tkinter canvas
def draw_figure_w_toolbar(canvas, fig, canvas_toolbar):
if canvas.children:
for child in canvas.winfo_children():
child.destroy()
if canvas_toolbar.children:
for child in canvas_toolbar.winfo_children():
child.destroy()
figure_canvas_agg = FigureCanvasTkAgg(fig, master=canvas)
figure_canvas_agg.draw()
toolbar = Toolbar(figure_canvas_agg, canvas_toolbar)
toolbar.update()
figure_canvas_agg.get_tk_widget().pack(side='right', fill='both', expand=1)
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
print(rect)
ax.add_patch(rect)
fig.canvas.draw()
class Toolbar(NavigationToolbar2Tk):
def __init__(self, *args, **kwargs):
super(Toolbar, self).__init__(*args, **kwargs)
# ------------------------------- PySimpleGUI CODE
layout = [
[sg.B('start', key='start')],
[sg.Canvas(key='controls_cv')],
[sg.Column(
layout=[
[sg.Canvas(key='fig_cv',
# it's important that you set this size
size=(500 * 2, 700)
)]
],
background_color='#DAE0E6',
pad=(0, 0)
)],
]
window = sg.Window('Test', layout)
while True:
event, values = window.read()
print(event, values)
if event == sg.WIN_CLOSED:
break
elif event == 'start':
x = np.linspace(0, 2 * np.pi)
y = np.sin(x)
line, = ax.plot(x, y)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
draw_figure_w_toolbar(window['fig_cv'].TKCanvas, fig, window['controls_cv'].TKCanvas)
window.close()
我正在尝试让 RectangleSelector 表单 matplotlib.widgets 与 PySimpleGUI 一起工作。 我的测试代码基于接受的答案 on this question.
中显示的 RectangleSelector 演示我正在 PySimpleGUI 中显示绘图，但它不是交互式的。在 PySimpleGUI 中甚至可以有交互式 matplotlib 小部件吗？
import PySimpleGUI as sg
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg
from matplotlib.widgets import RectangleSelector
import matplotlib
matplotlib.use('TkAgg')
xdata = np.linspace(0,9*np.pi, num=301)
ydata = np.sin(xdata)
fig, ax = plt.subplots()
line, = ax.plot(xdata, ydata)
def draw_figure(canvas, figure):
figure_canvas_agg = FigureCanvasTkAgg(figure, canvas)
figure_canvas_agg.draw()
figure_canvas_agg.get_tk_widget().pack(side="top", fill="both", expand=1)
return figure_canvas_agg
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
ax.add_patch(rect)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
layout = [[sg.Canvas(key="-CANVAS-")]]
window = sg.Window('test', layout, finalize=True, element_justification='center', font='Helvetica 16')
draw_figure(window["-CANVAS-"].TKCanvas, fig)
event, values = window.read()
编辑： 感谢 MikeyB 的指点，我现在有以下代码，它显示了一个交互式绘图，但仍然无法绘制矩形。回调函数似乎没有触发。新代码如下：
import PySimpleGUI as sg
import numpy as np
from matplotlib.widgets import RectangleSelector
import matplotlib.figure as figure
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg, NavigationToolbar2Tk
# instantiate matplotlib figure
fig = figure.Figure()
ax = fig.add_subplot(111)
DPI = fig.get_dpi()
fig.set_size_inches(505 * 2 / float(DPI), 707 / float(DPI))
# ------------------------------- This is to include a matplotlib figure in a Tkinter canvas
def draw_figure_w_toolbar(canvas, fig, canvas_toolbar):
if canvas.children:
for child in canvas.winfo_children():
child.destroy()
if canvas_toolbar.children:
for child in canvas_toolbar.winfo_children():
child.destroy()
figure_canvas_agg = FigureCanvasTkAgg(fig, master=canvas)
figure_canvas_agg.draw()
toolbar = Toolbar(figure_canvas_agg, canvas_toolbar)
toolbar.update()
figure_canvas_agg.get_tk_widget().pack(side='right', fill='both', expand=1)
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
print(rect)
ax.add_patch(rect)
class Toolbar(NavigationToolbar2Tk):
def __init__(self, *args, **kwargs):
super(Toolbar, self).__init__(*args, **kwargs)
# ------------------------------- PySimpleGUI CODE
layout = [
[sg.B('start', key='start')],
[sg.Canvas(key='controls_cv')],
[sg.Column(
layout=[
[sg.Canvas(key='fig_cv',
# it's important that you set this size
size=(500 * 2, 700)
)]
],
background_color='#DAE0E6',
pad=(0, 0)
)],
]
window = sg.Window('Test', layout)
while True:
event, values = window.read()
print(event, values)
if event == sg.WIN_CLOSED:
break
elif event == 'start':
x = np.linspace(0, 2 * np.pi)
y = np.sin(x)
line, = ax.plot(x, y)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
draw_figure_w_toolbar(window['fig_cv'].TKCanvas, fig, window['controls_cv'].TKCanvas)
window.close()
Is it even possible in PySimpleGUI to have interactive matplotlib widgets?
是的。
项目GitHub上的演示程序演示了如何制作交互式 Matplotlib 绘图。
您需要将控件嵌入到 window。
你需要添加
fig.canvas.draw()
如果您希望在触发回调后更新绘图，请添加到您的回调函数！
这是您的代码的更新版本，运行良好：
import PySimpleGUI as sg
import numpy as np
from matplotlib.widgets import RectangleSelector
import matplotlib.figure as figure
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg, NavigationToolbar2Tk
import matplotlib.pyplot as plt
# instantiate matplotlib figure
fig = figure.Figure()
ax = fig.add_subplot(111)
DPI = fig.get_dpi()
fig.set_size_inches(505 * 2 / float(DPI), 707 / float(DPI))
# ------------------------------- This is to include a matplotlib figure in a Tkinter canvas
def draw_figure_w_toolbar(canvas, fig, canvas_toolbar):
if canvas.children:
for child in canvas.winfo_children():
child.destroy()
if canvas_toolbar.children:
for child in canvas_toolbar.winfo_children():
child.destroy()
figure_canvas_agg = FigureCanvasTkAgg(fig, master=canvas)
figure_canvas_agg.draw()
toolbar = Toolbar(figure_canvas_agg, canvas_toolbar)
toolbar.update()
figure_canvas_agg.get_tk_widget().pack(side='right', fill='both', expand=1)
def line_select_callback(eclick, erelease):
x1, y1 = eclick.xdata, eclick.ydata
x2, y2 = erelease.xdata, erelease.ydata
rect = plt.Rectangle( (min(x1,x2),min(y1,y2)), np.abs(x1-x2), np.abs(y1-y2) )
print(rect)
ax.add_patch(rect)
fig.canvas.draw()
class Toolbar(NavigationToolbar2Tk):
def __init__(self, *args, **kwargs):
super(Toolbar, self).__init__(*args, **kwargs)
# ------------------------------- PySimpleGUI CODE
layout = [
[sg.B('start', key='start')],
[sg.Canvas(key='controls_cv')],
[sg.Column(
layout=[
[sg.Canvas(key='fig_cv',
# it's important that you set this size
size=(500 * 2, 700)
)]
],
background_color='#DAE0E6',
pad=(0, 0)
)],
]
window = sg.Window('Test', layout)
while True:
event, values = window.read()
print(event, values)
if event == sg.WIN_CLOSED:
break
elif event == 'start':
x = np.linspace(0, 2 * np.pi)
y = np.sin(x)
line, = ax.plot(x, y)
rs = RectangleSelector(ax, line_select_callback,
drawtype='box', useblit=False, button=[1],
minspanx=5, minspany=5, spancoords='pixels',
interactive=True)
draw_figure_w_toolbar(window['fig_cv'].TKCanvas, fig, window['controls_cv'].TKCanvas)
window.close()