为代理商制造瓶颈障碍

Question

我正在尝试创建一个补丁，它将成为海龟必须经过的路径中间的瓶颈结构。

我已经创建了抛物线，但我想添加一个滑块以便可以更改瓶颈的大小，但我不知道如何创建将移动它的代码。

这是代码（我对抛物线的数学很糟糕，所以我得到了上面那个的帮助，我只是手动创建了下面那个）

to setup-road
  ;; patch procedure
  ;; colour patches to paint a horizontal road

  let bound (max-pycor / 3)
  ifelse (pycor < (max-pycor  - bound)) and (pycor > (min-pycor + bound))
  [ set pcolor red - 3 ]
  [ set pcolor green ]

  set upper-road-bound (max-pycor  - bound - 2 )
  set lower-road-bound (min-pycor  + bound + 2 )
  setup-top-parabola-on-road
  setup-down-parabola-on-road
end
;; I want to be able to expand the parabolas so that the opening between them will be wider as well as narrow according a slider.
to setup-top-parabola-on-road
  ask patches with
  [pxcor > -25 and pxcor < 25] [
     if pycor > ((pxcor ^ 2) / 20 + 10)
    [ set pcolor green  ]
    ]
end

to setup-down-parabola-on-road

  ask patches with [pxcor >= -4 and pxcor <= 4 and pycor = -11][set pcolor green]
  ask patches with [pxcor >= -5 and pxcor <= 5 and pycor = -12][set pcolor green]
  ask patches with [pxcor >= -6 and pxcor <= 6 and pycor = -13][set pcolor green]
  ask patches with [pxcor >= -7 and pxcor <= 7 and pycor = -14][set pcolor green]
  ask patches with [pxcor >= -8 and pxcor <= 8 and pycor = -15][set pcolor green]
  ask patches with [pxcor >= -9 and pxcor <= 9 and pycor = -16][set pcolor green]
  ask patches with [pxcor >= -10 and pxcor <= 10 and pycor = -17][set pcolor green]
  ask patches with [pxcor >= -11 and pxcor <= 11 and pycor = -18][set pcolor green]
  ask patches with [pxcor >= -12 and pxcor <= 12 and pycor = -19][set pcolor green]
  ask patches with [pxcor >= -13 and pxcor <= 13 and pycor = -20][set pcolor green]
  ask patches with [pxcor >= -14 and pxcor <= 14 and pycor = -21][set pcolor green]
  ask patches with [pxcor >= -15 and pxcor <= 15 and pycor = -22][set pcolor green]
  ask patches with [pxcor >= -16 and pxcor <= 16 and pycor = -23][set pcolor green]
  ask patches with [pxcor >= -17 and pxcor <= 17 and pycor = -24][set pcolor green]
  ask patches with [pxcor >= -18 and pxcor <= 18 and pycor = -25][set pcolor green]
end

有人能帮忙吗？

Answer 1

给你。这假设您有一个名为设置的按钮和一个范围从 0 到 11 的可变“宽度”滑块。

我在您设置红色和绿色的顶部附近添加了一个“询问补丁 []”。


to setup
  clear-all
  setup-road
  reset-ticks
end


to setup-road
  ;; patch procedure
  ;; colour patches to paint a horizontal road

  let bound (max-pycor / 3)
  
  ask patches [
       ifelse (pycor < (max-pycor  - bound)) and (pycor > (min-pycor + bound))
       [ set pcolor red - 3 ]
       [ set pcolor green ]
  ]
  
  let upper-road-bound (max-pycor  - bound - 2 )
  let lower-road-bound (min-pycor  + bound + 2 )
  
  
  setup-top-parabola-on-road
  setup-down-parabola-on-road
end
;; I want to be able to expand the parabolas so that the opening between them will be wider as well as narrow according a slider.
to setup-top-parabola-on-road
  ask patches with
  [pxcor > -25 and pxcor < 25] [
     if pycor > ((pxcor ^ 2) / 20 + width)
    [ set pcolor blue  ]
    ]
end

to setup-down-parabola-on-road
 ask patches with
  [pxcor > -25 and pxcor < 25] [
     if pycor <   (-1 * (pxcor ^ 2) / 20) - width + 1   
    [ set pcolor yellow  ]
    ]

   
end

为代理商制造瓶颈障碍

Creating a bottleneck obstacle for agents

netlogo

bottleneck