使用 Scapy 识别 telnet 协议 python
Recognize telnet protocol with Scapy python
我正在用 Scapy 读取 Pcap 文件。如何识别这个pcap文件中是否有使用Telnet协议的数据包？
我看到 Scapy 可以将 'telnet' 写入 dport/sport 只有当这些端口之一是 23 时，但是如果我使用另一个端口进行 Telnet，我如何用 Scapy 识别它？
试试
for pkt in PcapReader('your_file.pcap'):
# you can try printing summary to see the packet
print(pkt.summary())
# should print something like
# IP / TCP 10.1.99.25:ftp_data > 10.1.99.2:telnet S
pkt_src = pkt[IP].src
pky_type = pkt[IP].type
pkt_payload = pkt[TCP].payload
if [...]
您可以打印 pkt 字典以查看 telnet 字符串可能落入哪个键下并进行一些模式匹配
我在另一个 Whosebug 答案中看到了直接执行 PcapReader 的建议，而不是使用 rdpcap 占用内存，但我丢失了 link
@TimRoberts stated in the comments that "Telnet is indistinguishable from other TCP protocols." This is true to some extent, because all TCP packets use the same structure, which is outlined in multiple Internet Engineering Task Force (IETF) Request for Comments (RFC) documents:
Here is the structure of a TCP packet.
Common application protocols such as Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP) and Telnet all use this structure.
Concerning the application protocol Telnet. As you already know the official port assignment for the telnet protocol is port 23. Most vendors adhere to this port standard, which is why "Scapy can write 'telnet' into dport/sport only if 1 of those ports is 23."
This is the TCP layer from a Telnet session using port 23:
Layer TCP:
Source Port: 1254
Destination Port: 23
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 72603759
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1010 .... = Header Length: 40 bytes (10)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 23
Connection establish request (SYN): server port 23
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 32120
Calculated window size: 32120
Checksum: 0x5d40 [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (20 bytes), Maximum segment size, SACK permitted, Timestamps, No-Operation (NOP), Window scale
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - SACK permitted
TCP Option - Timestamps: TSval 1444389, TSecr 0
Timestamp value: 1444389
Timestamp echo reply: 0
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 0 (multiply by 1)
Shift count: 0
Multiplier: 1
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: SACK Permitted (4)
Kind: Time Stamp Option (8)
Kind: No-Operation (1)
Kind: Window Scale (3)
Length: 2
Length: 10
Length: 3
This is the TCP layer from a Telnet session using port 3005:
Layer TCP:
Source Port: 52187
Destination Port: 3005
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 1355255000
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1011 .... = Header Length: 44 bytes (11)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 3005
Connection establish request (SYN): server port 3005
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 65535
Calculated window size: 65535
Checksum: 0x0afb [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (24 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps, SACK permitted, End of Option List (EOL)
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 6 (multiply by 64)
Shift count: 6
Multiplier: 64
TCP Option - Timestamps: TSval 3609205717, TSecr 0
Timestamp value: 3609205717
Timestamp echo reply: 0
TCP Option - SACK permitted
TCP Option - End of Option List (EOL)
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Kind: SACK Permitted (4)
Kind: End of Option List (0)
Length: 3
Length: 10
Length: 2
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
This is the TCP layer from a FTP session using port 21:
Layer TCP:
Source Port: 35974
Destination Port: 21
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 29473206
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1010 .... = Header Length: 40 bytes (10)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 21
Connection establish request (SYN): server port 21
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 32648
Calculated window size: 32648
Checksum: 0x8fda [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (20 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps
TCP Option - Maximum segment size: 1380 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1380
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 0 (multiply by 1)
Shift count: 0
Multiplier: 1
TCP Option - Timestamps: TSval 1657560000, TSecr 0
Timestamp value: 1657560000
Timestamp echo reply: 0
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Length: 3
Length: 10
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
This is the TCP layer from a SSH session using port 22:
Layer TCP:
Source Port: 57732
Destination Port: 22
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 71043058
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1011 .... = Header Length: 44 bytes (11)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 22
Connection establish request (SYN): server port 22
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 65535
Calculated window size: 65535
Checksum: 0xd079 [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (24 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps, SACK permitted, End of Option List (EOL)
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 6 (multiply by 64)
Shift count: 6
Multiplier: 64
TCP Option - Timestamps: TSval 1452973307, TSecr 0
Timestamp value: 1452973307
Timestamp echo reply: 0
TCP Option - SACK permitted
TCP Option - End of Option List (EOL)
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Kind: SACK Permitted (4)
Kind: End of Option List (0)
Length: 3
Length: 10
Length: 2
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
As previously stated these TCP layers are almost indistinguishable. So trying to use the TCP layer alone would be hard to determine a Telnet session over a port other than port 23. So trying to use Scapy to identify these sessions without doing a more in-depth packet analysis would be extremely hard.
You could potential analyze the data layer of a TCP packet to determine if a connection is or isn't a Telnet session. This again requires substantial effort unless you have done some level of traffic analysis.
Using the Python module pyshark you extract content from the Data layer.
Telnet session over port 23:
import pyshark
# the pcap is a Telnet session over port 23
capture = pyshark.FileCapture('telnet-raw.pcap')
for packet in capture:
if hasattr(packet, 'tcp'):
layers = packet.layers
# 0 1 2 3
# [<ETH Layer>, <IP Layer>, <TCP Layer>, <DATA Layer>]
if len(layers) > 3:
payload = packet.tcp.payload
The payload output is in hex
truncated...
ff:fb:01:ff:fa:21:02:ff:f0:ff:fc:01
ff:fd:01:ff:fe:01
ff:fa:22:03:05:80:00:11:80:00:12:80:00:ff:f0
0d:0a:4f:70:65:6e:42:53:44:2f:69:33:38:36:20:28:6f:6f:66:29:20:28:74:74:79:70:31:29:0d:0a:0d:0a
6c:6f:67:69:6e:3a:20
ff:fc:22:ff:fd:01
truncated...
The 4th and 5th hex strings in the output are an important piece to deciphering what type of TCP connection might be occurring.
import binascii
hex_data = '0d:0a:4f:70:65:6e:42:53:44:2f:69:33:38:36:20:28:6f:6f:66:29:20:28:74:74:79:70:31:29:0d:0a:0d:0a6c:6f:67:69:6e:3a:20 '
hex_string = ' '.join(hex_data.split('0d:0a')).replace(':', '')
hex_list = hex_string.split()
for item in hex_list:
decoded_string = binascii.unhexlify(item)
print(decoded_string)
# output
b'OpenBSD/i386 (oof) (ttyp1)'
b'login: '
After decoding the hex we can see that authentication is occurring over port 23.
Telnet session over port 3005:
import pyshark
# the pcap is a Telnet session over port 3005
capture = pyshark.FileCapture('telnet-pcap-1.pcapng')
for packet in capture:
if hasattr(packet, 'tcp'):
layers = packet.layers
# 0 1 2 3
# [<ETH Layer>, <IP Layer>, <TCP Layer>, <DATA Layer>]
if len(layers) > 3:
payload = packet.tcp.payload
The payload output is in hex
ff:fb:01:ff:fb:03:ff:fd:18:ff:fd:1f
ff:fd:01:ff:fd:03:ff:fb:18:ff:fb:1f:ff:fa:1f:00:97:00:2f:ff:f0
0d:0a:55:73:65:72:20:41:63:63:65:73:73:20:56:65:72:69:66:69:63:61:74:69:6f:6e:0d:0a:0d:0a:55:73:65:72:6e:61:6d:65:3a:20
ff:fa:18:01:ff:f0
ff:fa:18:00:58:54:45:52:4d:2d:32:35:36:43:4f:4c:4f:52:ff:f0
truncated...
The 3rd hex string in the output is an important piece to deciphering what type of TCP connection might be occurring.
import binascii
hex_data = '0d:0a:55:73:65:72:20:41:63:63:65:73:73:20:56:65:72:69:66:69:63:61:74:69:6f:6e:0d:0a:0d:0a:55:73:65:72:6e:61:6d:65:3a:20'
# removing line breaks from the hex string
hex_string = ' '.join(hex_data.split('0d:0a')).replace(':', '')
hex_list = hex_string.split()
for item in hex_list:
decoded_string = binascii.unhexlify(item)
print(decoded_string)
# output
b'User Access Verification'
b'Username: '
After decoding the hex we can see that some type of authentication is occurring over port 3005. Additional analysis would be required to determine if this session is a Telnet session or some other session.
我正在用 Scapy 读取 Pcap 文件。如何识别这个pcap文件中是否有使用Telnet协议的数据包？
我看到 Scapy 可以将 'telnet' 写入 dport/sport 只有当这些端口之一是 23 时，但是如果我使用另一个端口进行 Telnet，我如何用 Scapy 识别它？
试试
for pkt in PcapReader('your_file.pcap'):
# you can try printing summary to see the packet
print(pkt.summary())
# should print something like
# IP / TCP 10.1.99.25:ftp_data > 10.1.99.2:telnet S
pkt_src = pkt[IP].src
pky_type = pkt[IP].type
pkt_payload = pkt[TCP].payload
if [...]
您可以打印 pkt 字典以查看 telnet 字符串可能落入哪个键下并进行一些模式匹配
我在另一个 Whosebug 答案中看到了直接执行 PcapReader 的建议，而不是使用 rdpcap 占用内存，但我丢失了 link
@TimRoberts stated in the comments that "Telnet is indistinguishable from other TCP protocols." This is true to some extent, because all TCP packets use the same structure, which is outlined in multiple Internet Engineering Task Force (IETF) Request for Comments (RFC) documents:
Here is the structure of a TCP packet.
Common application protocols such as Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP) and Telnet all use this structure.
Concerning the application protocol Telnet. As you already know the official port assignment for the telnet protocol is port 23. Most vendors adhere to this port standard, which is why "Scapy can write 'telnet' into dport/sport only if 1 of those ports is 23."
This is the TCP layer from a Telnet session using port 23:
Layer TCP:
Source Port: 1254
Destination Port: 23
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 72603759
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1010 .... = Header Length: 40 bytes (10)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 23
Connection establish request (SYN): server port 23
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 32120
Calculated window size: 32120
Checksum: 0x5d40 [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (20 bytes), Maximum segment size, SACK permitted, Timestamps, No-Operation (NOP), Window scale
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - SACK permitted
TCP Option - Timestamps: TSval 1444389, TSecr 0
Timestamp value: 1444389
Timestamp echo reply: 0
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 0 (multiply by 1)
Shift count: 0
Multiplier: 1
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: SACK Permitted (4)
Kind: Time Stamp Option (8)
Kind: No-Operation (1)
Kind: Window Scale (3)
Length: 2
Length: 10
Length: 3
This is the TCP layer from a Telnet session using port 3005:
Layer TCP:
Source Port: 52187
Destination Port: 3005
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 1355255000
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1011 .... = Header Length: 44 bytes (11)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 3005
Connection establish request (SYN): server port 3005
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 65535
Calculated window size: 65535
Checksum: 0x0afb [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (24 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps, SACK permitted, End of Option List (EOL)
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 6 (multiply by 64)
Shift count: 6
Multiplier: 64
TCP Option - Timestamps: TSval 3609205717, TSecr 0
Timestamp value: 3609205717
Timestamp echo reply: 0
TCP Option - SACK permitted
TCP Option - End of Option List (EOL)
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Kind: SACK Permitted (4)
Kind: End of Option List (0)
Length: 3
Length: 10
Length: 2
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
This is the TCP layer from a FTP session using port 21:
Layer TCP:
Source Port: 35974
Destination Port: 21
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 29473206
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1010 .... = Header Length: 40 bytes (10)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 21
Connection establish request (SYN): server port 21
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 32648
Calculated window size: 32648
Checksum: 0x8fda [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (20 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps
TCP Option - Maximum segment size: 1380 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1380
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 0 (multiply by 1)
Shift count: 0
Multiplier: 1
TCP Option - Timestamps: TSval 1657560000, TSecr 0
Timestamp value: 1657560000
Timestamp echo reply: 0
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Length: 3
Length: 10
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
This is the TCP layer from a SSH session using port 22:
Layer TCP:
Source Port: 57732
Destination Port: 22
Stream index: 0
TCP Segment Len: 0
Sequence number: 0 (relative sequence number)
Sequence number (raw): 71043058
Next sequence number: 1 (relative sequence number)
Acknowledgment number: 0
Acknowledgment number (raw): 0
1011 .... = Header Length: 44 bytes (11)
Flags: 0x002 (SYN)
000. .... .... = Reserved: Not set
...0 .... .... = Nonce: Not set
.... 0... .... = Congestion Window Reduced (CWR): Not set
.... .0.. .... = ECN-Echo: Not set
.... ..0. .... = Urgent: Not set
.... ...0 .... = Acknowledgment: Not set
.... .... 0... = Push: Not set
.... .... .0.. = Reset: Not set
.... .... ..1. = Syn: Set
Expert Info (Chat/Sequence): Connection establish request (SYN): server port 22
Connection establish request (SYN): server port 22
Severity level: Chat
Group: Sequence
.... .... ...0 = Fin: Not set
TCP Flags: \xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7\xc2\xb7S\xc2\xb7
Window size value: 65535
Calculated window size: 65535
Checksum: 0xd079 [unverified]
Checksum Status: Unverified
Urgent pointer: 0
Options: (24 bytes), Maximum segment size, No-Operation (NOP), Window scale, No-Operation (NOP), No-Operation (NOP), Timestamps, SACK permitted, End of Option List (EOL)
TCP Option - Maximum segment size: 1460 bytes
Kind: Maximum Segment Size (2)
Length: 4
MSS Value: 1460
TCP Option - No-Operation (NOP)
TCP Option - Window scale: 6 (multiply by 64)
Shift count: 6
Multiplier: 64
TCP Option - Timestamps: TSval 1452973307, TSecr 0
Timestamp value: 1452973307
Timestamp echo reply: 0
TCP Option - SACK permitted
TCP Option - End of Option List (EOL)
Timestamps
Time since first frame in this TCP stream: 0.000000000 seconds
Time since previous frame in this TCP stream: 0.000000000 seconds
Kind: No-Operation (1)
Kind: Window Scale (3)
Kind: No-Operation (1)
Kind: No-Operation (1)
Kind: Time Stamp Option (8)
Kind: SACK Permitted (4)
Kind: End of Option List (0)
Length: 3
Length: 10
Length: 2
TCP Option - No-Operation (NOP)
TCP Option - No-Operation (NOP)
As previously stated these TCP layers are almost indistinguishable. So trying to use the TCP layer alone would be hard to determine a Telnet session over a port other than port 23. So trying to use Scapy to identify these sessions without doing a more in-depth packet analysis would be extremely hard.
You could potential analyze the data layer of a TCP packet to determine if a connection is or isn't a Telnet session. This again requires substantial effort unless you have done some level of traffic analysis.
Using the Python module pyshark you extract content from the Data layer.
Telnet session over port 23:
import pyshark
# the pcap is a Telnet session over port 23
capture = pyshark.FileCapture('telnet-raw.pcap')
for packet in capture:
if hasattr(packet, 'tcp'):
layers = packet.layers
# 0 1 2 3
# [<ETH Layer>, <IP Layer>, <TCP Layer>, <DATA Layer>]
if len(layers) > 3:
payload = packet.tcp.payload
The payload output is in hex
truncated...
ff:fb:01:ff:fa:21:02:ff:f0:ff:fc:01
ff:fd:01:ff:fe:01
ff:fa:22:03:05:80:00:11:80:00:12:80:00:ff:f0
0d:0a:4f:70:65:6e:42:53:44:2f:69:33:38:36:20:28:6f:6f:66:29:20:28:74:74:79:70:31:29:0d:0a:0d:0a
6c:6f:67:69:6e:3a:20
ff:fc:22:ff:fd:01
truncated...
The 4th and 5th hex strings in the output are an important piece to deciphering what type of TCP connection might be occurring.
import binascii
hex_data = '0d:0a:4f:70:65:6e:42:53:44:2f:69:33:38:36:20:28:6f:6f:66:29:20:28:74:74:79:70:31:29:0d:0a:0d:0a6c:6f:67:69:6e:3a:20 '
hex_string = ' '.join(hex_data.split('0d:0a')).replace(':', '')
hex_list = hex_string.split()
for item in hex_list:
decoded_string = binascii.unhexlify(item)
print(decoded_string)
# output
b'OpenBSD/i386 (oof) (ttyp1)'
b'login: '
After decoding the hex we can see that authentication is occurring over port 23.
Telnet session over port 3005:
import pyshark
# the pcap is a Telnet session over port 3005
capture = pyshark.FileCapture('telnet-pcap-1.pcapng')
for packet in capture:
if hasattr(packet, 'tcp'):
layers = packet.layers
# 0 1 2 3
# [<ETH Layer>, <IP Layer>, <TCP Layer>, <DATA Layer>]
if len(layers) > 3:
payload = packet.tcp.payload
The payload output is in hex
ff:fb:01:ff:fb:03:ff:fd:18:ff:fd:1f
ff:fd:01:ff:fd:03:ff:fb:18:ff:fb:1f:ff:fa:1f:00:97:00:2f:ff:f0
0d:0a:55:73:65:72:20:41:63:63:65:73:73:20:56:65:72:69:66:69:63:61:74:69:6f:6e:0d:0a:0d:0a:55:73:65:72:6e:61:6d:65:3a:20
ff:fa:18:01:ff:f0
ff:fa:18:00:58:54:45:52:4d:2d:32:35:36:43:4f:4c:4f:52:ff:f0
truncated...
The 3rd hex string in the output is an important piece to deciphering what type of TCP connection might be occurring.
import binascii
hex_data = '0d:0a:55:73:65:72:20:41:63:63:65:73:73:20:56:65:72:69:66:69:63:61:74:69:6f:6e:0d:0a:0d:0a:55:73:65:72:6e:61:6d:65:3a:20'
# removing line breaks from the hex string
hex_string = ' '.join(hex_data.split('0d:0a')).replace(':', '')
hex_list = hex_string.split()
for item in hex_list:
decoded_string = binascii.unhexlify(item)
print(decoded_string)
# output
b'User Access Verification'
b'Username: '
After decoding the hex we can see that some type of authentication is occurring over port 3005. Additional analysis would be required to determine if this session is a Telnet session or some other session.