无法启用端口 vc.null_sink:in:0(OPQV)：ENOSPC

Question

我正在 Raspberry Pi 上工作，我已经连接了我的 Picam 并进行了测试，运行是正确的。但是当我的应用程序出现错误时。

错误：

Opening ASL Model!
/home/pi/Desktop/ASL/ASLClassifier.dat
SVM Loaded successfully..
mmal: mmal_vc_port_enable: failed to enable port vc.null_sink:in:0(OPQV): ENOSPC
mmal: mmal_port_enable: failed to enable connected port (vc.null_sink:in:0(OPQV))0x6a221df0 (ENOSPC)
mmal: mmal_connection_enable: output port couldn't be enabled
[2021-05-10 12:02:57,924] ERROR in app: Exception on /camera [POST]
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/flask/app.py", line 2292, in wsgi_app
    response = self.full_dispatch_request()
  File "/usr/lib/python3/dist-packages/flask/app.py", line 1815, in full_dispatch_request
    rv = self.handle_user_exception(e)
  File "/usr/lib/python3/dist-packages/flask/app.py", line 1718, in handle_user_exception
    reraise(exc_type, exc_value, tb)
  File "/usr/lib/python3/dist-packages/flask/_compat.py", line 35, in reraise
    raise value
  File "/usr/lib/python3/dist-packages/flask/app.py", line 1813, in full_dispatch_request
    rv = self.dispatch_request()
  File "/usr/lib/python3/dist-packages/flask/app.py", line 1799, in dispatch_request
    return self.view_functions[rule.endpoint](**req.view_args)
  File "app.py", line 122, in camera
    cap=PiCamera(0)
  File "/usr/lib/python3/dist-packages/picamera/camera.py", line 433, in __init__
    self._init_preview()
  File "/usr/lib/python3/dist-packages/picamera/camera.py", line 513, in _init_preview
    self, self._camera.outputs[self.CAMERA_PREVIEW_PORT])
  File "/usr/lib/python3/dist-packages/picamera/renderers.py", line 558, in __init__
    self.renderer.inputs[0].connect(source).enable()
  File "/usr/lib/python3/dist-packages/picamera/mmalobj.py", line 2212, in enable
    prefix="Failed to enable connection")
  File "/usr/lib/python3/dist-packages/picamera/exc.py", line 184, in mmal_check
    raise PiCameraMMALError(status, prefix)
picamera.exc.PiCameraMMALError: Failed to enable connection: Out of resources
127.0.0.1 - - [10/May/2021 12:02:57] "POST /camera HTTP/1.1" 500 -

摄像机路线

# Camera route
@app.route("/camera", methods = ['POST'])
def camera():
    print("Opening ASL Model!")
    try:
        direct = cwd + "/ASLClassifier.dat"
        print(direct)
        model=st.load(direct)
        print("SVM Loaded successfully..")
    except:
        model=st.trainSVM(17)
    
    cap=cv2.VideoCapture(0)
    cap=PiCamera(0)
    camera=PiCamera()
    camera.resolution = (640, 480)
    camera.framerate = 32
    rawCapture = PiRGBArray(camera, size=(640, 480))
    time.sleep(0.1)
    rgbFrame = PiRGBArray(camera, size = camera.resolution)
    frame1 = captureProcessFrame(camera, rgbFrame, 5)
    frameCount = 0
    font = cv2.FONT_HERSHEY_SIMPLEX
    text= " "

    temp=0
    previouslabel=None # Past label
    previousText=" " # Past text
    label = None # current label
    
    for frame in camera.capture_continuous(rawCapture, format="bgr", use_video_port=True): 
        stream = frame.array # store frame input as array
        rawCapture.truncate(0) # take optional size
        img=stream # store stream as temp img
        cv2.rectangle(img, (300,300), (100,100), (0,255,0),0) # create rectangle one screen
        img1 = img[100:300, 100:300] # image stream ratio
        img_ycrcb = cv2.cvtColor(img1, cv2.COLOR_BGR2YCR_CB) # color format settings
        blur = cv2.GaussianBlur(img_ycrcb,(11,11),0)
        skin_ycrcb_min = np.array((0, 138, 67)) # color spaces min
        skin_ycrcb_max = np.array((255, 173, 133)) # color spaces max
        mask = cv2.inRange(blur, skin_ycrcb_min, skin_ycrcb_max) 
        imgres,contours,hierarchy = cv2.findContours(mask.copy(), cv2.RETR_EXTERNAL, 
        cv2.CHAIN_APPROX_SIMPLE) # track motion points
        cnt=ut.getMaxContour(contours,4000) #store total motion points
        if cnt is not None: # is there something there?
            gesture,label=ut.getGestureImg(cnt,img1,mask,model)   
            if(label!=None): 
                if(temp==0): # if temp is 0
                    previouslabel=label # last label now label
                elif previouslabel==label: # still same gesture?
                    previouslabel=label # track again
                    temp+=1 # increse temp gesture count
                else: # otherwise
                    temp=0 # temp gesture back to 0
                if(temp==40): # has it been on screen for 40 temp counts?
                    if(label=='P'): # create sentence space if user does P
                        label=" " # lable space
                        text= text + label # add results to text
                    if(label=='Q'): # Wipe with Q(QUIT)
                        words = re.split(" +",text) # split result
                        words.pop() # push text off
                        text = " ".join(words) # fresh text
                        #text=previousText
                print(text) # print out your last gestures before quiting

            #cv2.imshow('PredictedGesture',gesture)              
            cv2.putText(img,label,(50,150), font,8,(0,125,155),2)  
            cv2.putText(img,text,(50,450), font,3,(0,0,255),2)
            
        cv2.imshow('Frame',img) # show on screen
        #cv2.imshow('Mask',mask)
        key = cv2.waitKey(1) & 0xFF # wait for q to quit
        if key == ord("q"): # is Q?
            #cap.release()        
            cv2.destroyAllWindows() # close OpenCV session
            camera.close()
            break # stop while

    return render_template("index.html")

我的 Pi cam 已启用，没有其他应用程序正在使用它，但我仍然收到此错误。请帮助我，下面是我用来触发 Pi cam 的 FLask API 代码。

Answer 1

更新固件再试，应该可以

sudo apt-get 更新 sudo apt-get upgrade

Answer 2

完成相机拍摄操作后使用此功能。这可能会停止相机的背景运行：

camera.close()

Answer 3

问题出在我的 Pi cam 上，我没有正确配置它，之后我使用

更新了我的公司

sudo apt update and sudo apt full-upgrade

Answer 4

我遇到了同样的错误。你必须关闭相机。如果您在收到错误后查看相机，它仍然会运行因为进程中的线程尚未结束。

无法启用端口 vc.null_sink:in:0(OPQV)：ENOSPC

failed to enable port vc.null_sink:in:0(OPQV): ENOSPC

python

flask

python-3.x

raspberry-pi

picamera